XFree86-4 install fails on a freshly installed 4.8-Release system.

[Eric Anholt]

On Wed, 2003-04-09 at 18:43, Federico Canton wrote:
> Hello, could any one please help?  I am trying to install XFree86-4 from
> ports on a new 4.8-Release system, but it fails.  
> 
> This is what I did:  Installed 4.8-Release via ftp, installed
> cvsup-without-gui from ports, used cvsup to sync the ports tree, and ran
> make install in /usr/ports/x11/XFree86-4.  Install stops at this point:
> 
> rm -f xm_tri.o
> LD_LIBRARY_PATH=/usr/ports/x11-servers/XFree86-4-Server/work/xc/exports/lib
> cc -O -pipe -ansi -Dasm=__asm -Wall -Wpointer-arith -Wundef
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/mesa/s
> rc/X -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/exports/include
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/exports/include/X11
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/include/extensions
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/extras/Mesa/src
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/extras/Mesa/src/X
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/extras/Mesa/include
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/lib/GL/glx
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/lib/GL/include
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/include
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/includ
> e
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/glx
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc
> -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/exports/include
> -I/usr/X11R6/include -DCSRG_BASED -DSHAPE -DXINPUT -DXKB -DLBX -DXAPPGROUP
> -DXCSECURITY -DTOGCUP  -DXF86BIGFONT -DDPMSExtension   -DPANORAMIX  -DRENDER
> -DRANDR -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXFreeXDGA
> -DXvExtension -DXFree86LOADER  -DXFree86Server -DXF86VIDMODE -DXvMCExtension
> -DSMART_SCHEDULE -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN
> -DNDEBUG  -DFUNCPROTO=15 -DNARROWPROTO  -DIN_MODULE -DXFree86Module -DGLXEXT
> -DXF86DRI -DGLX_DIRECT_RENDERING -DGLX_USE_DLOPEN -DGLX_USE_MESA    -c
> xm_tri.c
> cpp0: output pipe has been closed
> cc: Internal compiler error: program cc1 got fatal signal 10
> *** Error code 1

Does it stop here every time?  My first guess would be bad hardware.

-- 
Eric Anholt                                eta at lclark.edu          
http://people.freebsd.org/~anholt/         anholt at FreeBSD.org