XFree86-4 install fails on a freshly installed 4.8-Release system.

[Federico Canton]

Hello, could any one please help?  I am trying to install XFree86-4 from
ports on a new 4.8-Release system, but it fails.  

This is what I did:  Installed 4.8-Release via ftp, installed
cvsup-without-gui from ports, used cvsup to sync the ports tree, and ran
make install in /usr/ports/x11/XFree86-4.  Install stops at this point:

rm -f xm_tri.o
LD_LIBRARY_PATH=/usr/ports/x11-servers/XFree86-4-Server/work/xc/exports/lib
cc -O -pipe -ansi -Dasm=__asm -Wall -Wpointer-arith -Wundef
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/mesa/s
rc/X -I/usr/ports/x11-servers/XFree86-4-Server/work/xc/exports/include
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/exports/include/X11
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/include/extensions
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/extras/Mesa/src
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/extras/Mesa/src/X
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/extras/Mesa/include
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/lib/GL/glx
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/lib/GL/include
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/include
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/includ
e
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/glx
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc
-I/usr/ports/x11-servers/XFree86-4-Server/work/xc/exports/include
-I/usr/X11R6/include -DCSRG_BASED -DSHAPE -DXINPUT -DXKB -DLBX -DXAPPGROUP
-DXCSECURITY -DTOGCUP  -DXF86BIGFONT -DDPMSExtension   -DPANORAMIX  -DRENDER
-DRANDR -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXFreeXDGA
-DXvExtension -DXFree86LOADER  -DXFree86Server -DXF86VIDMODE -DXvMCExtension
-DSMART_SCHEDULE -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN
-DNDEBUG  -DFUNCPROTO=15 -DNARROWPROTO  -DIN_MODULE -DXFree86Module -DGLXEXT
-DXF86DRI -DGLX_DIRECT_RENDERING -DGLX_USE_DLOPEN -DGLX_USE_MESA    -c
xm_tri.c
cpp0: output pipe has been closed
cc: Internal compiler error: program cc1 got fatal signal 10
*** Error code 1

Stop in
/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/mesa/src
/X.
*** Error code 1

Stop in
/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/mesa/src
.
*** Error code 1

Stop in
/usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL/mesa.
*** Error code 1

Stop in /usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver/GL.
*** Error code 1

Stop in /usr/ports/x11-servers/XFree86-4-Server/work/xc/programs/Xserver.
*** Error code 1

Stop in /usr/ports/x11-servers/XFree86-4-Server.
*** Error code 1

Stop in /usr/ports/x11/XFree86-4.

I would greatly appreciate any help you could offer.

Regards,

federico