Problem with VLAN config and traffic after 10.1-R -> 10.3-R-p5 Upgrade?

[Karl Pielorz]

--On 23 June 2016 13:32 +0100 Matthew Seaman <matthew at FreeBSD.org> wrote:

> I use a similar config with vlans over lagg.  While I haven't seen
> exactly your problem, I did see one instance of the vlan interface
> coming up with an all-zero MAC address (out of about 10 systems upgraded
> to 10.3-RELEASE so far).  See PR207701 -- my workaround was to
> explicitly set a MAC address for the vlan i/f.

Hi,

We seem to always have a MAC address on the lagg - so I don't think we've 
hit that issue.

> We're configuring the vlan interfaces slightly differently so that they
> end up with a name like 'vlan123' rather than 'lagg0.123' -- if that
> difference is significant then it maybe gives you an alternate
> workaround to running your interfaces promiscuously.

Any chance you can send us a snippet of how they're setup in '/etc/rc.conf' 
if it's different.

When we originally set this up way-back-when we had a lot of fun with the 
various ways & syntax of getting it setup, just settling for the way we do 
'because it works' - not ideal I guess, so I'd be interested to see if 
there's another way of spec'ing the config in rc.conf

Cheers,

-Karl