mpd as pppoe server

[Jefim]

Hello!
I have a problem with setting up mpd as pppoe server on FreeBSD 5.3.
All netgraph modules are compiled into kernel.
Here is mpd log:

[pppoe1:pppoe1] [pppoe0] PPPoE server listening on rl0: for service "testnet"
Incoming PPPoE connection request via rl0: for service "testnet" from 00:50:8d:5e:29:37
[pppoe0] Accepting PPPoE connection
[pppoe0] PPPoE response sent
[pppoe0] IPCP: Open event
[pppoe0] IPCP: state change Initial --> Starting
[pppoe0] IPCP: LayerStart
[pppoe0] bundle: OPEN event in state CLOSED
[pppoe0] opening link "pppoe0"...
[pppoe0] link: OPEN event
[pppoe0] LCP: Open event
[pppoe0] LCP: state change Initial --> Starting
[pppoe0] LCP: LayerStart
[pppoe0] device: OPEN event in state DOWN
[pppoe0] PppoeOpen() on incoming call
[pppoe0] device is now in state OPENING
Incoming PPPoE connection request via rl0: for service "testnet" from 00:50:8d:5e:29:37
[pppoe1] Accepting PPPoE connection

And does the same thing with pppoe1 link.

My mpd.conf:
default:
        load pppoe0
        load pppoe1

pppoe0:
        new -i ng2 pppoe0 pppoe0
        set ipcp ranges 10.0.0.1/32 10.0.0.2/32
        load pppoe_standart
pppoe1:
        new -i ng3 pppoe1 pppoe1
        set ipcp ranges 10.0.0.1/32 10.0.0.2/32
        load pppoe_standart

pppoe_standart:
        set bundle no multilink
        set bundle enable compression
        set bundle accept encryption
        set bundle max-logins 1
        set iface idle 0
        set iface disable on-demand
        set iface disable proxy-arp
        set iface enable tcpmssfix
        set iface mtu 1500
        set link mtu 1500
        set link no pap chap
        set link enable chap
        set link keep-alive 60 180
        set ipcp yes vjcomp
        set ipcp no vjcomp
        set link max-redial -1
        set link mtu 1492
        set ccp yes mpp-e40
        set ccp yes mpp-e128
        set ccp yes mpp-stateless
        set pppoe iface rl0
        set pppoe service "testnet"
        set pppoe disable originate
        set pppoe enable incoming
        set ipcp dns 193.41.195.5
        set link latency 1

Client's OS is Windows XP SP2.

Thanks in advance for helping solving this problem!