mythtv 0.24_1 and the pvr250 driver - testing

[Bernhard Froehlich]

On Mon, 23 May 2011 22:12:16 +0200, Torfinn Ingolfsen wrote:
> Update:
> 
> On Mon, 18 Apr 2011 18:26:21 +0200
> Torfinn Ingolfsen <torfinn.ingolfsen at broadpark.no> wrote:
> 
>> Hello,
>> I am testing MythTV (0.24_1 from ports) using my test machine which have a PVR-350 card.
>> I am using the pvr250 driver from ports.
>> The card and driver is tested with mplayer (see other messae on this mailing list) and works fine.
>>
>> Details about the system used for testing:
>> root at kg-quiet# uname -a
>> FreeBSD kg-quiet.kg4.no 8.2-STABLE FreeBSD 8.2-STABLE #0: Sun Apr  3 19:49:05 CEST 2011     root at kg-quiet.kg4.no:/usr/obj/usr/src/sys/GENERIC  amd64
>> root at kg-quiet# pv | grep pvr
>> pvr250-20101010_1           =  up-to-date with port
>> root at kg-quiet# pv | grep myth
>> mythtv-0.24_1               =  up-to-date with port
>>
>> When I start mythtv-setup, and get to cature card setup, I can select the
>> "IVTV MPEG-2 encoder card" from the list (Yay! This was one of the things not working in 0.23).
>> But "Probed info:" reads "Failed to probe", and in the shell (from which I started mythtv-setup
>> I see messages like this:
>> "2011-04-18 17:53:55.949 Could not query inputs.
>>                                            eno: Inappropriate ioctl for device (25)"
>> repeated four times, followed by:
>> "2011-04-18 17:54:17.986 ProbeAudioInputs(/dev/cxm0,HDPVR)
>> 2011-04-18 17:54:17.986 ProbeV4LAudioInputs(/dev/cxm0)"
>>
> 
> Today I repeated the test above with MythTV 0.24.1_1 from ports. The
> only things updated on my test machine since the last time was the
> ports tree.
> Unfortunately, test results were the same as before. :-(
> HTH

>Could not query inputs. eno: Inappropriate ioctl for device (25)

Sounds like the driver does not support some ioctls. Already tried to
contact the author of the cxm driver?

-- 
Bernhard Fröhlich
http://www.bluelife.at/