FreeBSD and controlling an alarm via relay
achill at matrix.gatewaynet.com
Tue Jul 5 07:48:31 UTC 2011
Στις Tuesday 05 July 2011 04:32:51 γράψατε:
> On Jul 4, 2011, at 7:39 AM, Achilleas Mantzios wrote:
> > Hello, sorry for the cross-post but i believe this question might seat in both lists.
> > I am the guy who had the done the old 1.23.3 zoneminder port some years ago, and i am thinking of installing/testing
> > the new 1.24.4 port, submitted by bsam at FreeBSD.org.
> > Besides the basic functions, i am thinking of re-using some old techniques by which i controlled
> > the home alarm via a NC/NO circuit (basically it was an enhanced door contact),
> > driven by an old zyXel modem, which in turn was driven by a small perl program driving the com port, and
> > which was called by a deamon reading zoneminder shared memory info directly.
> > That way i could trigger the alarm system getting into alarm state, whenever zoneminder detected motion,
> > in a fully controlled and programmatic way.
> > Now i am thinking of re-doing this, a little bit more modern, if possible. I was thinking of some relay board
> > (instead of the old modem), possibly ethernet controlled (to get rid of all the obsolete com port programming),
> > and such. Also i will scrap the old NO/NC solution (circuit embded in the door contact), and i wil use instead a new
> > dedicated wireless transimter i bought (same brand as the alarm system), which is also NC/NO and receives
> > two inputs and corresponds to two zones. So i am thinking of assigning 2 cameras as two disctinct zones
> > in the alarm system.
> > That is the rough idea. What would you guys have to recommend (regarding the relay?). I do not plan to use
> > this relay for power/lights on/off and such, at this stage it will function solely to drive the alarm transimtter,
> > (which in turn will drigger an alarm to the central alarm control panel)
> If you want to go ethernet -> gpio, i think the routerstation (or routerstation pro) is one good option. The routerstation (not the pro version) works with 12v~24v (12v is kind common for alarm systems) and has 7 available GPIO pins (which works as inputs and outputs - you can connect relays, switches, leds, lcds, i2c and spi devices).
> GPIO pins can be easily controlled from userland with gpioctl(8) or with a small C program with the appropriate ioctl()s (or even using the led(4) framework).
> Please take a look at http://wiki.freebsd.org/FreeBSD/mips/UBNT-RouterStation for more detailed information.
> Both boards works _really_ fine with -current.
i see there is nothing GPIO related in 8.2, grep -i gpio /usr/src/sys/ yields nothing.
Also, i was looking for an actual relay that could drive this simple wireless transmitter :
http://www.visonic.com/Data/Uploads/MCT_100_Installer_Guide_English_DE2241U.pdf (installation manual)
So what i wanna do is simple, sent some command to a relay which will open a normally closed or
close a normally open circuit in the above transmitter, and trigger an alarm.
More information about the freebsd-multimedia