MythTV backend - any hope to get my PVR-250 working?
Saul A Peebsen
jaglover at gmail.com
Sun Apr 17 02:05:26 UTC 2011
On Sat, 16 Apr 2011 15:33:52 +0200
Torfinn Ingolfsen <torfinn.ingolfsen at broadpark.no> wrote:
> On Sat, 16 Apr 2011 07:59:22 -0500
> Saul A Peebsen <jaglover at gmail.com> wrote:
>
> > Let me ask, is multimedia/pvr250 supposed to create just one node
> > [cxm] or there is supposed to be more?
>
> Depends on the card in question, but in general, one /dev/cxm? per
> tuner. Here is my PVR-350 card:
> root at kg-quiet# uname -a
> FreeBSD kg-quiet.kg4.no 8.2-STABLE FreeBSD 8.2-STABLE #0: Sun Apr 3
> 19:49:05 CEST 2011
> root at kg-quiet.kg4.no:/usr/obj/usr/src/sys/GENERIC amd64
> root at kg-quiet# portversion -v | grep pvr pvr250-20101010_1
> = up-to-date with port root at kg-quiet# grep cxm /var/log/messages Apr
> 15 22:12:08 kg-quiet kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem
> 0xf8000000-0xfbffffff irq 20 at device 0.0 on pci2 Apr 15 22:12:08
> kg-quiet kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller>
> on cxm0 Apr 15 22:12:08 kg-quiet kernel: iicbb0: <I2C bit-banging
> driver> on cxm_iic0 Apr 15 22:12:08 kg-quiet kernel: cxm0: Philips
> driver> FM1216ME MK3 tuner Apr 15 22:12:08 kg-quiet kernel: cxm0:
> driver> SAA7115 rev 1 video decoder Apr 15 22:12:08 kg-quiet kernel:
> driver> cxm0: MSP4418G-B3 audio decoder
> Apr 15 22:12:08 kg-quiet kernel: cxm0: IR Remote
> Apr 15 22:12:08 kg-quiet kernel: cxm0: [GIANT-LOCKED]
> Apr 15 22:12:08 kg-quiet kernel: cxm0: [ITHREAD]
> Apr 15 22:12:08 kg-quiet kernel: cxm0: encoder firmware version
> 0x2050032 Apr 15 22:12:08 kg-quiet kernel: cxm0: decoder firmware
> version 0x2020023 root at kg-quiet# ls -l /dev/cxm*
> crw-rw-rw- 1 root wheel 0, 126 Apr 15 22:12 /dev/cxm0
This is what I see:
cxm0: <Conexant iTVC16 MPEG Coder> mem 0xf0000000-0xf3ffffff irq 17 at
device 14.0 on pci0 cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller>
on cxm0 iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
cxm0: Philips FI1236 MK2 tuner
cxm0: SAA7115 rev 1 video decoder
cxm0: MSP4448G-A2 audio decoder
cxm0: [GIANT-LOCKED]
cxm0: [ITHREAD]
cxm0: encoder firmware version 0x2050032
I suppose that's OK? Please note I had to remove IR from sources because
my card doesn't have it.
Anyhow, I tried to configure it using mythtv-setup and whatever type of
card I tried it always displayed "Failed to open". I've updated the log
at
http://saul.homeunix.org:8000/tmp/mythbackend.log
Does it mean I have to set up channels before backend can start? Or does
it mean the card cannot be used?
I appreciate your help.
--
Cheers, Saul
More information about the freebsd-multimedia
mailing list