usleep's pvrxxx port and /boot/loader.conf - panic

Sat Jan 2 07:38:18 UTC 2010

On Sat, Jan 2, 2010 at 7:17 AM, Torfinn Ingolfsen
<torfinn.ingolfsen at broadpark.no> wrote:
> It looks like usleep's pvrxxx port (the 09042008 version) works quite
> nicely with my Hauppauge PVR-500 under FreeBSD 7.2-stable:
> tingo at kg-fil$ uname -a
> FreeBSD kg-fil.kg4.no 7.2-STABLE FreeBSD 7.2-STABLE #0: Fri Jan  1 20:50:58 CET 2010     root at kg-fil.kg4.no:/usr/obj/usr/src/sys/GENERIC  amd64
>
> from /var/log/messages:
> Jan  1 23:57:38 kg-fil kernel: cxm0: <Conexant iTVC16 MPEG Coder> mem 0xe0000000-0xe3ffffff irq 18 at device 8.0 on pci2
> Jan  1 23:57:38 kg-fil kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
> Jan  1 23:57:38 kg-fil kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0
> Jan  1 23:57:38 kg-fil kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only
> Jan  1 23:57:38 kg-fil kernel: iicbus0: <unknown card> at addr 0
> Jan  1 23:57:38 kg-fil kernel: iicbus0: <unknown card> at addr 0
> Jan  1 23:57:38 kg-fil kernel: <2>tveeprom: Second (radio) tuner idx 101
> Jan  1 23:57:38 kg-fil kernel: <2>tveeprom: ivtv version
> Jan  1 23:57:38 kg-fil kernel: <2>tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990584
> Jan  1 23:57:38 kg-fil kernel: <2>tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
> Jan  1 23:57:38 kg-fil kernel: <2>tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
> Jan  1 23:57:38 kg-fil kernel: <2>tveeprom: audio processor = CX25843 (type = 25)
> Jan  1 23:57:38 kg-fil kernel: <2>tveeprom: decoder processor = CX25843 (type = 1e)
> Jan  1 23:57:38 kg-fil kernel: tuner type: 56
> Jan  1 23:57:38 kg-fil kernel: cxm0: Eeprom PAL
> Jan  1 23:57:38 kg-fil kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by cxm
> Jan  1 23:57:38 kg-fil kernel: tuner: switching to v4l2
> Jan  1 23:57:38 kg-fil kernel: before tuner_command!
> Jan  1 23:57:38 kg-fil kernel: tuner: tv freq set to 55.25
> Jan  1 23:57:38 kg-fil kernel: tuner: tv 0x05 0xe3 0xce 0x01
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Video signal:              not present
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Detected format:           NTSC-M
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Detected audio mode:       forced mode
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Detected audio standard:   forced audio standard
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Audio muted:               yes
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Audio microcontroller:     running
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Configured audio standard: A2-BG
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Configured audio mode:     undefined
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Specified standard:        PAL-BDGHI
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Specified input:           Tuner
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Specified audio input:     Tuner
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Specified audioclock freq: 48 kHz
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Preferred audio mode:      stereo
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Selected 65 MHz format:    autodetect
> Jan  1 23:57:48 kg-fil kernel: <2>cxm 0-0000: Selected 45 MHz format:    chroma
> Jan  1 23:57:48 kg-fil kernel: cxm0: [ITHREAD]
> Jan  1 23:57:50 kg-fil kernel: cxm0: encoder firmware version 0x2060039
> Jan  1 23:57:50 kg-fil kernel: cxm1: <Conexant iTVC16 MPEG Coder> mem 0xe4000000-0xe7ffffff irq 19 at device 9.0 on pci2
> Jan  1 23:57:50 kg-fil kernel: cxm_iic1: <Conexant iTVC15 / iTVC16 I2C controller> on cxm1
> Jan  1 23:57:50 kg-fil kernel: iicbb1: <I2C bit-banging driver> on cxm_iic1
> Jan  1 23:57:50 kg-fil kernel: iicbus1: <Philips I2C bus> on iicbb1 master-only
> Jan  1 23:57:50 kg-fil kernel: iicbus1: <unknown card> at addr 0
> Jan  1 23:57:50 kg-fil kernel: iicbus1: <unknown card> at addr 0
> Jan  1 23:57:50 kg-fil kernel: <2>tveeprom: Second (radio) tuner idx 101
> Jan  1 23:57:50 kg-fil kernel: <2>tveeprom: ivtv version
> Jan  1 23:57:50 kg-fil kernel: <2>tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990584
> Jan  1 23:57:50 kg-fil kernel: <2>tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
> Jan  1 23:57:50 kg-fil kernel: <2>tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
> Jan  1 23:57:50 kg-fil kernel: <2>tveeprom: audio processor = CX25843 (type = 25)
> Jan  1 23:57:50 kg-fil kernel: <2>tveeprom: decoder processor = CX25843 (type = 1e)
> Jan  1 23:57:50 kg-fil kernel: tuner type: 56
> Jan  1 23:57:50 kg-fil kernel: cxm1: Eeprom PAL
> Jan  1 23:57:50 kg-fil kernel: tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by cxm
> Jan  1 23:57:50 kg-fil kernel: tuner: switching to v4l2
> Jan  1 23:57:50 kg-fil kernel: before tuner_command!
> Jan  1 23:57:50 kg-fil kernel: tuner: tv freq set to 55.25
> Jan  1 23:57:50 kg-fil kernel: tuner: tv 0x05 0xe3 0xce 0x01
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Video signal:              not present
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Detected format:           NTSC-M
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Detected audio mode:       forced mode
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Detected audio standard:   forced audio standard
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Audio muted:               yes
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Audio microcontroller:     running
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Configured audio standard: A2-BG
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Configured audio mode:     undefined
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Specified standard:        PAL-BDGHI
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Specified input:           Tuner
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Specified audio input:     Tuner
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Specified audioclock freq: 48 kHz
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Preferred audio mode:      stereo
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Selected 65 MHz format:    autodetect
> Jan  1 23:58:03 kg-fil kernel: <2>cxm 0-0000: Selected 45 MHz format:    chroma
> Jan  1 23:58:03 kg-fil kernel: cxm1: [ITHREAD]
> Jan  1 23:58:03 kg-fil kernel: cxm1: encoder firmware version 0x2060039
>
> (Note: I haven't actually tested it with mplayer etc yet, that is why I say that it "looks" like it works.
> But it will work).
> But ther is one slight problem: if I try to load the cxm_iic and cxm modules in /boot/loader.conf,
> the machine panics during boot.
> If I load the modules manually after boot, everything is fine.
>
> Is there some other place that I can load these modules autmatically, after the machine has booted?
> A startup script or something like it?

You may try /etc/rc.local
> --
> Regards,
> Torfinn Ingolfsen
>
> _______________________________________________
> freebsd-multimedia at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe at freebsd.org"
>

Cheers,
Henry