pvrxxx install
Jim
stapleton.41 at gmail.com
Fri Aug 8 01:20:01 UTC 2008
pvrxxx install
Inbox X
Reply to all
Forward
Reply by chat
Filter messages like this
Print
Add to Contacts list
Delete this message
Report phishing
Report not phishing
Show original
Show in fixed width font
Show in variable width font
Message text garbled?
Why is this spam/nonspam?
Jim
I downloaded the pvrxxx file from usleepless' site (http://usleepless.110mb.c...
Jul 28 (11 days ago)
usleepless at gmail.com
Jim, I think so. Please try and let us know. If it works I will adapt the Mak...
Jul 29 (10 days ago)
Jim
OK, it compiled, but I got the following result (I'm using a pvr350 if that h...
Jul 31 (7 days ago)
usleepless at gmail.com
to me, freebsd-multim.
show details 5:07 AM (16 hours ago)
Reply
Jim,
On Fri, Aug 1, 2008 at 2:16 AM, Jim <stapleton.41 at gmail.com> wrote:
> On Tue, Jul 29, 2008 at 7:31 AM, <usleepless at gmail.com> wrote:
>
>> I think so. Please try and let us know. If it works I will adapt the
>> Makefile for pvrxxx.
>>
>> regards,
>>
>> usleepless
>>
>
> OK, it compiled, but I got the following result (I'm using a pvr350 if
> that has any relevance):
Is there a signal on the SVIDEO input? Can you try other inputs?
regards,
usleepless
- Show quoted text -
>
> Thanks,
> -Jim Stapleton
>
>
> end-of-compile, load attempt, channel change attempt.
>
> ===> Compressing manual pages for pvrxxx-09042008
> ===> Registering installation for pvrxxx-09042008
> [sjss at elrond /usr/ports/multimedia/pvrxxx]$ sudo kldload cxm_iic
> Password:
> [sjss at elrond /usr/ports/multimedia/pvrxxx]$ sudo kldload cxm
> [sjss at elrond /usr/ports/multimedia/pvrxxx]$ pvr250-setchannel -s
> ioctl( tfd, METEORSINPUT ) failed.: Invalid argument
> [sjss at elrond /usr/ports/multimedia/pvrxxx]$
>
>
>
> here's the output of /var/log/message
>
> Jul 31 20:12:55 elrond sudo: sjss : TTY=ttyp2 ;
> PWD=/usr/ports/multimedia/pvrxxx ; USER=root ; COMMAND=/sbin/kldload
> cxm
> Jul 31 20:12:56 elrond kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem
> 0xf4000000-0xf7ffffff irq 19 at device 8.0 on pci1
> Jul 31 20:12:56 elrond kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C
> controller> on cxm0
> Jul 31 20:12:56 elrond kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0
> Jul 31 20:12:56 elrond kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only
> Jul 31 20:12:56 elrond kernel: iicbus0: <unknown card> at addr 0
> Jul 31 20:12:56 elrond kernel: iicbus0: <unknown card> at addr 0
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: ivtv version
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: Hauppauge: model = 48132,
> rev = K268, serial# = 10490693
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: tuner = LG TAPE H001F MK3
> (idx = 68, type = 47)
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: tuner fmt = NTSC(M)
> (eeprom = 0x08, v4l2 = 0x00001000)
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: audio processor = MSP4448
> (type = 1b)
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: decoder processor =
> SAA7115 (type = 13)
> Jul 31 20:12:56 elrond kernel: tuner type: 47
> Jul 31 20:12:56 elrond kernel: cxm0: Eeprom NTSC
> Jul 31 20:12:56 elrond kernel: tuner: type set to 47 (LG NTSC (TAPE
> series)) by cxm
> Jul 31 20:12:56 elrond kernel: tuner: switching to v4l2
> Jul 31 20:12:56 elrond kernel: before tuner_command!
> Jul 31 20:12:56 elrond kernel: tuner: tv freq set to 61.25
> Jul 31 20:12:56 elrond kernel: tuner: tv 0x06 0xb0 0x8e 0x01
> Jul 31 20:12:58 elrond kernel: cxm0: SAA7115 rev 1 video decoder
> Jul 31 20:12:58 elrond kernel: cxm0: MSP4448G-B3 audio decoder
> Jul 31 20:12:58 elrond kernel: cxm0: IR Remote
> Jul 31 20:12:58 elrond kernel: cxm0: [ITHREAD]
> Jul 31 20:12:58 elrond kernel: cxm0: encoder firmware version 0x2060039
> Jul 31 20:12:58 elrond kernel: cxm0: decoder firmware version 0x2020023
> Jul 31 20:13:11 elrond kernel: cxm0: video decoder failed to lock
>
Reply
Reply to all
Forward
Your message has been sent.
Jim
to usleepless
show details 9:19 PM
Reply
On Thu, Aug 7, 2008 at 5:07 AM, <usleepless at gmail.com> wrote:
> Jim,
>
> On Fri, Aug 1, 2008 at 2:16 AM, Jim <stapleton.41 at gmail.com> wrote:
>> On Tue, Jul 29, 2008 at 7:31 AM, <usleepless at gmail.com> wrote:
>>
>>> I think so. Please try and let us know. If it works I will adapt the
>>> Makefile for pvrxxx.
>>>
>>> regards,
>>>
>>> usleepless
>>>
>>
>> OK, it compiled, but I got the following result (I'm using a pvr350 if
>> that has any relevance):
>
> Is there a signal on the SVIDEO input? Can you try other inputs?
>
> regards,
>
> usleepless
>
Yeah, there's a signal. I tried -c and -t, same exact results.
I think I'll return the card and get something else. The vendor I go
to sells DViCO now. Unfortunately, it's only the 7 series, so I may
end up getting a different model hauppauge.
Thanks for the help though.
-Jim Stapleton
Reply
Forward
More information about the freebsd-multimedia
mailing list