pvrxxx install

[usleepless at gmail.com]

Jim,

On Fri, Aug 1, 2008 at 2:16 AM, Jim <stapleton.41 at gmail.com> wrote:
> On Tue, Jul 29, 2008 at 7:31 AM,  <usleepless at gmail.com> wrote:
>
>> I think so. Please try and let us know. If it works I will adapt the
>> Makefile for pvrxxx.
>>
>> regards,
>>
>> usleepless
>>
>
> OK, it compiled, but I got the following result (I'm using a pvr350 if
> that has any relevance):

Is there a signal on the SVIDEO input? Can you try other inputs?

regards,

usleepless

>
> Thanks,
> -Jim Stapleton
>
>
> end-of-compile, load attempt, channel change attempt.
>
> ===>   Compressing manual pages for pvrxxx-09042008
> ===>   Registering installation for pvrxxx-09042008
> [sjss at elrond /usr/ports/multimedia/pvrxxx]$ sudo kldload cxm_iic
> Password:
> [sjss at elrond /usr/ports/multimedia/pvrxxx]$ sudo kldload cxm
> [sjss at elrond /usr/ports/multimedia/pvrxxx]$ pvr250-setchannel -s
> ioctl( tfd, METEORSINPUT ) failed.: Invalid argument
> [sjss at elrond /usr/ports/multimedia/pvrxxx]$
>
>
>
> here's the output of /var/log/message
>
> Jul 31 20:12:55 elrond sudo:     sjss : TTY=ttyp2 ;
> PWD=/usr/ports/multimedia/pvrxxx ; USER=root ; COMMAND=/sbin/kldload
> cxm
> Jul 31 20:12:56 elrond kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem
> 0xf4000000-0xf7ffffff irq 19 at device 8.0 on pci1
> Jul 31 20:12:56 elrond kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C
> controller> on cxm0
> Jul 31 20:12:56 elrond kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0
> Jul 31 20:12:56 elrond kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only
> Jul 31 20:12:56 elrond kernel: iicbus0: <unknown card> at addr 0
> Jul 31 20:12:56 elrond kernel: iicbus0: <unknown card> at addr 0
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: ivtv version
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: Hauppauge: model = 48132,
> rev = K268, serial# = 10490693
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: tuner = LG TAPE H001F MK3
> (idx = 68, type = 47)
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: tuner fmt = NTSC(M)
> (eeprom = 0x08, v4l2 = 0x00001000)
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: audio processor = MSP4448
> (type = 1b)
> Jul 31 20:12:56 elrond kernel: <2>tveeprom: decoder processor =
> SAA7115 (type = 13)
> Jul 31 20:12:56 elrond kernel: tuner type: 47
> Jul 31 20:12:56 elrond kernel: cxm0: Eeprom NTSC
> Jul 31 20:12:56 elrond kernel: tuner: type set to 47 (LG NTSC (TAPE
> series)) by cxm
> Jul 31 20:12:56 elrond kernel: tuner: switching to v4l2
> Jul 31 20:12:56 elrond kernel: before tuner_command!
> Jul 31 20:12:56 elrond kernel: tuner: tv freq set to 61.25
> Jul 31 20:12:56 elrond kernel: tuner: tv 0x06 0xb0 0x8e 0x01
> Jul 31 20:12:58 elrond kernel: cxm0: SAA7115 rev 1 video decoder
> Jul 31 20:12:58 elrond kernel: cxm0: MSP4448G-B3 audio decoder
> Jul 31 20:12:58 elrond kernel: cxm0: IR Remote
> Jul 31 20:12:58 elrond kernel: cxm0: [ITHREAD]
> Jul 31 20:12:58 elrond kernel: cxm0: encoder firmware version 0x2060039
> Jul 31 20:12:58 elrond kernel: cxm0: decoder firmware version 0x2020023
> Jul 31 20:13:11 elrond kernel: cxm0: video decoder failed to lock
>