kern/111767: [pcm] ATI SB450 High Definition Audio Controller sound card doesn't work

[Nate Lawson]

The following reply was made to PR kern/111767; it has been noted by GNATS.

From: Nate Lawson <nate at root.org>
To: cokane at FreeBSD.org, bug-followup at FreeBSD.org
Cc:  
Subject: Re: kern/111767: [pcm] ATI SB450 High Definition Audio Controller
 sound card doesn't work
Date: Thu, 29 Nov 2007 17:52:25 -0800

 Coleman Kane wrote:
 > Nate Lawson wrote:
 >> Does it work if you disable acpi?
 >> hint.acpi.0.disabled="1"
 >>   
 > Tried it with that loader hint (actually I chose the disable ACPI option
 > from the bootloader menu) and I still get the same errors from both drivers.
 > 
 > Below is the lspci -d 1002:4383 -xxxx -v output for the card:
 > 00:14.2 Class 0403: Unknown device 1002:4383
 >         Subsystem: Unknown device 103c:30c2
 >         Flags: bus master, slow devsel, latency 64, IRQ 16
 >         Memory at d0608000 (64-bit, non-prefetchable)
 >         Capabilities: [50] Power Management version 2
 > 00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00
 > 10: 04 80 60 d0 00 00 00 00 00 00 00 00 00 00 00 00
 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 c2 30
 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 10 01 00 00
 > 40: 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00
 > 50: 01 00 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
 > 60: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 > 
 > Below is the pciconf -lvc:
 > pcm0 at pci0:0:20:2:       class=0x040300 card=0x30c2103c chip=0x43831002
 > rev=0x00 hdr=0x00
 >     vendor     = 'ATI Technologies Inc'
 >     device     = 'IXP SB600 High Definition Audio Controller'
 >     class      = multimedia
 >     cap 01[50] = powerspec 2  supports D0 D3  current D0
 
 If it is the same problem with/without acpi, then it can't be an acpi
 problem.  Perhaps someone else has a clue?
 
 -- 
 Nate