FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working.
Rick Nekus
solarux at hotmail.com
Sun Apr 1 19:08:50 UTC 2007
Hi, Thanks Torfinn for the reply and ya I did a couple things mentioned if
thats enuf ?
>From: Torfinn Ingolfsen <torfinn.ingolfsen at broadpark.no>
>To: freebsd-multimedia at freebsd.org
>Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working.
>Date: Sun, 01 Apr 2007 18:44:13 +0200
>
>Hello,
>
>On Sun, 01 Apr 2007 14:19:29 +0000
>Rick Nekus <solarux at hotmail.com> wrote:
>
> > Here, are the original files from my Hauppage PVR-350 driver-CD that
> > I copied over
> > to my system.
> > I have read in some threads here and by googling that I should
> > cp HcwMakoC.ROM -> HcwMakoA.ROM, and copy that and hcwPVRP2.sys to
> > /usr/ports/distfiles. -ok ?
>
>Hmm, I think that shouldn't be necessary if you are using the latest
>pvrxxx port from usleep. Unfortunately, the port needs a fix on recent
>RELENG_6 to compile, I'm not sure if it compiles without problems on
>6.2-RELEASE. We're all hoping that usleep will find the time to uypdate
>the port one of these days. :-)
I hear ya, so this is still a love/work in progress I gather? -thats fine,
we all love a challenge.
>
> Have you tried updating your ports tree to get the latest pvrxxx port?
yup.
I did portscan fetch;portscan extract; portscan update
that should do it right ?, or is there a special "usleepless" update
available?
umm, trying to make sense of other threads here, does this mean install
FreeBSD 5.3 ? (is that the alternative for now?), ...
>
> > ...at this point, 'cause I bought the card a couple days ago, I just
> > wanted to make sure
> > all is ok with it, so I tested it with Ubuntu(atleast it wasn't
> > Windows :) and I've included the dmesg hardware specs below:
>
>Hmm, I have my PVR-350 in a FreeBSD box, it looks like this:
>
>root at kg-quiet# pciconf -lv | grep -B 4 video
>cxm0 at pci2:0:0: class=0x040000 card=0x40000070 chip=0x08034444 rev=0x01
>hdr=0x00
> vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)'
> device = 'iTVC15/CX23415 MPEG Codec'
> class = multimedia
> subclass = video
>
>and with lspci (installed from ports):
>root at kg-quiet# lspci -vs 02:00.0
>02:00.0 Multimedia video controller: Internext Compression Inc iTVC15
>MPEG-2 Encoder (rev 01)
> Subsystem: Hauppauge computer works Inc. WinTV PVR-350
> Flags: bus master, medium devsel, latency 64, IRQ 20
> Memory at f8000000 (32-bit, prefetchable)
> Capabilities: [44] Power Management version 2
>
>Unfortuntately, the pvrxxx driver doesn't work for this card right now.
uhh ok, well thats' a small letdown, should I use the pvr250 ( they both
look the same to me pvr250/xxx ?) or maybe (on a dry-humour note)we could
remind these hardware manuf. giants that "sales" mean "sell as many cards as
you can and ignore FUD by big green machines !"... drivers,... for everyone.
-ya I know :) Alice in sum wunder.
>HTH
thanks fo the above tip and,
mine is:
[rick at tiger ~]$ pciconf -lv | grep -B 4 video
none0 at pci2:10:0: class=0x040000 card=0x40000070 chip=0x08034444
rev=0x01 hdr=0x00
vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)'
device = 'iTVC15/CX23415 MPEG Codec'
class = multimedia
subclass = video
and, (for lspci)
[rick at tiger ~]$ sudo lspci -v
"...
02:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2
Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at f4000000 (32-bit, prefetchable)
Capabilities: [44] Power Management version 2
..."
it sounds close to me ?, am I reading this wrong, but how did you get
"yours'" working (or did you?) being you have the same cx23415 chip
(PVR-350) set I have -or is this a tuner specific fullfilment that is not
supported?
...sorry, see what I mean, .. stumped again
:)
and thanks again for being patient about all this.
-you guys are supportively awesome, and anything i can do for da' cause just
let me know.
Rick.
solarux at hotmail.com
>--
>Regards,
>Torfinn Ingolfsen,
>Norway
>
>_______________________________________________
>freebsd-multimedia at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
>To unsubscribe, send any mail to
>"freebsd-multimedia-unsubscribe at freebsd.org"
_________________________________________________________________
Check Out Our List Of Trendy Restaurants. You'll Eat It Up!
http://local.live.com/?mkt=en-ca/?v=2&cid=A6D6BDB4586E357F!378
More information about the freebsd-multimedia
mailing list