HEADS UP: Last call for snd_hda(4) testers - High Definition
Audio driver
Dennis Melentyev
dennis.melentyev at gmail.com
Fri Sep 29 12:16:10 PDT 2006
2006/9/28, Ariff Abdullah <ariff at freebsd.org>:
...
> As suggested by netchild@, please report your success or failure like
> this to freebsd-multimedia at FreeBSD.org:
>
Success
-------
Hardware/chipset: Dell Inspirion 1300 / STAC9220
Playback: Works flawlessly, including volume regulation and
headphones reaction
Recording: Doesn't work at all. Just noise with distinct
cracking sound at the beginning.
Specific Issues: mic does not appear in recording sources list.
Setting rec src to any available device (vol, line) does not change
anything. Moreover, first time I boot the new driver mixer shows mic
as a rec source, while there is no such device in list.
Verbose dmesg is attached.
Special request: please do not kill me dumping my dmesgs back upon my head :)
PS. Does "not supporting recording on some HW" mean Dell I1300?
--
Dennis Melentyev
-------------- next part --------------
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: wakeup code va 0xc715e000 pa 0x9e000
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 9 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 9 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9 10 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 7
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 9 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 9 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 9 10 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 9 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 9 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 10 11
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x10e0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2590, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2592, revid=0x03
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dff00000, size 19, enabled
map[14]: type 4, range 32, base 0000eff8, size 3, enabled
map[18]: type 3, range 32, base c0000000, size 28, enabled
map[1c]: type 1, range 32, base dfec0000, size 18, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2792, revid=0x03
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dff80000, size 19, enabled
found-> vendor=0x8086, dev=0x2668, revid=0x03
bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base dfebc000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2660, revid=0x03
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x2666, revid=0x03
bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
found-> vendor=0x8086, dev=0x2658, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000bf80, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2659, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000bf60, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x265a, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[20]: type 4, range 32, base 0000bf40, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x265b, revid=0x03
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=7
map[20]: type 4, range 32, base 0000bf20, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x265c, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base b0000000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2448, revid=0xd3
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2641, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266f, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
acpi_video0: <ACPI video extension> port 0xeff8-0xefff mem 0xdff00000-0xdff7ffff,0xc0000000-0xcfffffff,0xdfec0000-0xdfefffff irq 16 at device 2.0 on pci0
found TV/HDTV or Analog-Video Monitor(200), idx#0, port#0, detectable by BIOS, head #0
found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, detectable by BIOS, head #0
found Internal/Integrated Digital Flat Panel(400), idx#0, port#0, detectable by BIOS, head #0
found External Digital Monitor(300), idx#0, port#0, detectable by BIOS, head #0
acpi_video1: <ACPI video extension> mem 0xdff80000-0xdfffffff at device 2.1 on pci0
evaluation of \\_SB_.PCI0.VID2._DOD makes no sense
pcm0: <Intel 82801F High Definition Audio Controller> mem 0xdfebc000-0xdfebffff irq 16 at device 27.0 on pci0
pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xdfebc000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
pcm0: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: secondary bus 11
pcib1: subordinate bus 11
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci11: <ACPI PCI bus> on pcib1
pci11: physical bus=11
pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib2: secondary bus 12
pcib2: subordinate bus 13
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xdfc00000-0xdfdfffff
pcib2: prefetched decode 0xd0000000-0xd01fffff
pci12: <ACPI PCI bus> on pcib2
pci12: physical bus=12
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbf60-0xbf7f irq 17 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf60
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xbf40-0xbf5f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xbf20-0xbf3f irq 19 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0000000-0xb00003ff irq 16 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xb0000000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: secondary bus 2
pcib3: subordinate bus 2
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xdfb00000-0xdfbfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pcib3: Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib3
pci2: physical bus=2
found-> vendor=0x14e4, dev=0x170c, revid=0x02
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dfbfc000, size 13, enabled
pcib3: (null) requested memory range 0xdfbfc000-0xdfbfdfff: good
pcib3: matched entry for 2.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
found-> vendor=0x14e4, dev=0x4318, revid=0x02
bus=2, slot=3, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 1, range 32, base dfbfe000, size 13, enabled
pcib3: (null) requested memory range 0xdfbfe000-0xdfbfffff: good
pcib3: matched entry for 2.3.INTA
pcib3: slot 3 INTA hardwired to IRQ 17
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfbfc000-0xdfbfdfff irq 18 at device 0.0 on pci2
bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xdfbfc000
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: bpf attached
bfe0: Ethernet address: 00:14:22:9d:55:1d
bfe0: [MPSAFE]
ndis0: <Dell TrueMobile 1300 WLAN Mini-PCI Card> mem 0xdfbfe000-0xdfbfffff irq 17 at device 3.0 on pci2
ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xdfbfe000
ndis0: [MPSAFE]
ndis0: NDIS API version: 5.1
ndis0: bpf attached
ndis0: Ethernet address: 00:14:a5:83:eb:33
ndis0: bpf attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 16 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54
ata1: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xe81 0xe81 0xe81 0xe81
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xe81 0xe81 0xe81 0xe81
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 49876451 hz
Timecounter "TSC" frequency 1496301479 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on ICH6 chip
ad0: setting UDMA100 on ICH6 chip
ad0: 76319MB <FUJITSU MHV2080AH 000000A0> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
acd0: setting PIO4 on ICH6 chip
acd0: setting UDMA33 on ICH6 chip
acd0: <SONY CD-RW/DVD-ROM CRX835E/KDKE> CDRW drive at ata0 as slave
acd0: 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: Vendor: 0x00008384
pcm0: Device: 0x00007690
pcm0: Revision: 0x00000022
pcm0: Stepping: 0x00000001
pcm0: PCI Subvendor: 0x01c91028
pcm0: Nodes: start=2 endnode=21 total=19
pcm0: [ 2] Ctl nid=11 Bind to NONE
pcm0: [ 4] Ctl nid=17 DISABLED
pcm0: Pin sense: nid=13 res=0x7fffffff
pcm0: Forcing Soft PCM volume
pcm0: Mixer "vol": child=0x00000010
pcm0: Mixer "pcm": parent="vol"
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "rec":
pcm0: Soft PCM mixer ENABLED
pcm0: sndbuf_setmap ef90000, 4000; 0xcca04000 -> ef90000
pcm0: sndbuf_setmap ef82000, 4000; 0xcca08000 -> ef82000
pcm0: <HDA Codec: Sigmatel STAC9220>
pcm0: <HDA Driver Revision: 20060929_0025>
pcm0:
pcm0: HDA quirks: SOFTPCMVOL FIXEDRATE FORCESTEREO
pcm0:
pcm0: +-------------------+
pcm0: | DUMPING HDA NODES |
pcm0: +-------------------+
pcm0:
pcm0: Default Parameter
pcm0: -----------------
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 11 16 22 32 44 48
pcm0: IN amp: 0x00000000
pcm0: OUT amp: 0x80051f1f
pcm0:
pcm0: nid: 2 [ANALOG]
pcm0: name: audio output
pcm0: widget_cap: 0x000d0401
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 11 16 22 32 44 48
pcm0: connections: 0
pcm0:
pcm0: nid: 3 [ANALOG]
pcm0: name: audio input
pcm0: widget_cap: 0x001d0541
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000800
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 11 16 22 32 44 48
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 4 [DIGITAL] [DISABLED]
pcm0: name: audio input
pcm0: widget_cap: 0x00140311
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000005
pcm0: Format: AC3 PCM
pcm0: PCM cap: 0x000e0160
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 22 44 48
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=8 [pin: SPDIF in (none)] [DISABLED]
pcm0:
pcm0: nid: 5 [DIGITAL] [DISABLED]
pcm0: name: audio output
pcm0: widget_cap: 0x00040211
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000005
pcm0: Format: AC3 PCM
pcm0: PCM cap: 0x000e01e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 22 32 44 48
pcm0: connections: 0
pcm0:
pcm0: nid: 6 [DIGITAL] [DISABLED]
pcm0: name: vendor widget
pcm0: widget_cap: 0x00f30201
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: connections: 0
pcm0:
pcm0: nid: 7 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x00300901
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000041
pcm0: connections: 3
pcm0: |
pcm0: + <- nid=2 [audio output] (selected)
pcm0: |
pcm0: + <- nid=8 [pin: SPDIF in (none)] [DISABLED]
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 8 [DIGITAL] [DISABLED]
pcm0: name: pin: SPDIF in (none)
pcm0: widget_cap: 0x00430681
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00010024
pcm0: IN EAPD : UNSOL
pcm0: Pin config: 0x40c001fb
pcm0: Pin control: 0x00000020 IN
pcm0: EAPD: 0x00000002
pcm0: connections: 0
pcm0:
pcm0: nid: 9 [DIGITAL] [DISABLED]
pcm0: name: pin: SPDIF out (none)
pcm0: widget_cap: 0x00400301
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000010
pcm0: OUT
pcm0: Pin config: 0x404001fa
pcm0: Pin control: 0x00000040 OUT
pcm0: connections: 2
pcm0: |
pcm0: + <- nid=5 [audio output] [DISABLED]
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 10 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x0030090d
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000841
pcm0: Output amp: 0x80050f00
pcm0: mute=1 step=15 size=5 offset=0
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=12 [audio selector]
pcm0:
pcm0: nid: 11 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x00300105
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Output amp: 0x80051f1f
pcm0: mute=1 step=31 size=5 offset=31
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=7 [audio selector]
pcm0:
pcm0: nid: 12 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x0030010d
pcm0: Parse flags: 0x00000006
pcm0: Ctl flags: 0x00000041
pcm0: Output amp: 0x270400
pcm0: mute=0 step=4 size=39 offset=0
pcm0: connections: 5
pcm0: |
pcm0: + <- nid=16 [pin: line in (jack)] (selected)
pcm0: |
pcm0: + <- nid=15 [pin: Mic in (jack)]
pcm0: |
pcm0: + <- nid=14 [pin: speaker (fixed)]
pcm0: |
pcm0: + <- nid=13 [pin: headphones out (jack)]
pcm0: |
pcm0: + <- nid=18 [pin: AUX (none)] [DISABLED]
pcm0:
pcm0: nid: 13 [ANALOG]
pcm0: name: pin: headphones out (jack)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x0000003f
pcm0: ISC TRQD HP OUT IN : UNSOL
pcm0: Pin config: 0x0321401f
pcm0: Pin control: 0x00000080 HP
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 14 [ANALOG]
pcm0: name: pin: speaker (fixed)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x0000003f
pcm0: ISC TRQD HP OUT IN : UNSOL
pcm0: Pin config: 0x90100110
pcm0: Pin control: 0x00000040 OUT
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 15 [ANALOG]
pcm0: name: pin: Mic in (jack)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000037
pcm0: ISC TRQD OUT IN : UNSOL
pcm0: Pin config: 0x03a11023
pcm0: Pin control: 0x00000020 IN
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 16 [ANALOG]
pcm0: name: pin: line in (jack)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000041
pcm0: Pin cap: 0x00001737
pcm0: ISC TRQD OUT IN : UNSOL
pcm0: Pin config: 0x03811020
pcm0: Pin control: 0x00000020 IN
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 17 [ANALOG] [DISABLED]
pcm0: name: pin: speaker (none)
pcm0: widget_cap: 0x00400104
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000010
pcm0: OUT
pcm0: Pin config: 0x401001fd
pcm0: Pin control: 0x00000040 OUT
pcm0: Output amp: 0x80051f1f
pcm0: mute=1 step=31 size=5 offset=31
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=19 [audio mixer]
pcm0:
pcm0: nid: 18 [ANALOG] [DISABLED]
pcm0: name: pin: AUX (none)
pcm0: widget_cap: 0x00400001
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000020
pcm0: IN
pcm0: Pin config: 0x409001fc
pcm0: Pin control: 0x00000020 IN
pcm0: connections: 0
pcm0:
pcm0: nid: 19 [ANALOG]
pcm0: name: audio mixer
pcm0: widget_cap: 0x00200100
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=7 [audio selector]
pcm0:
pcm0: nid: 20 [ANALOG]
pcm0: name: beep widget
pcm0: widget_cap: 0x0070000c
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000021
pcm0: Output amp: 0x80170303
pcm0: mute=1 step=3 size=23 offset=3
pcm0: connections: 0
pcm0:
pcm0: +------------------------+
pcm0: | DUMPING HDA AMPLIFIERS |
pcm0: +------------------------+
pcm0:
pcm0: 1: nid=10 dir=0x1 index=0 ossmask=0x00000800 ossdev=0
pcm0: 2: nid=11 dir=0x1 index=0 ossmask=0x00000000 ossdev=0
pcm0: 3: nid=12 dir=0x1 index=0 ossmask=0x00000041 ossdev=6
pcm0: 4: nid=17 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 [DISABLED]
pcm0: 5: nid=20 dir=0x1 index=0 ossmask=0x00000021 ossdev=5
pcm0:
pcm0: +-----------------------------------+
pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS |
pcm0: +-----------------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- nid: 12 index: 0 mute: 0 step: 4 size: 39 off: 0 dir=0x1 ossmask=0x00000041
pcm0: |
pcm0: +- nid: 20 index: 0 mute: 1 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000021
pcm0:
pcm0: Line-in Volume (OSS: line)
pcm0: |
pcm0: +- nid: 12 index: 0 mute: 0 step: 4 size: 39 off: 0 dir=0x1 ossmask=0x00000041
pcm0:
pcm0: Recording Level (OSS: rec)
pcm0: |
pcm0: +- nid: 10 index: 0 mute: 1 step: 15 size: 5 off: 0 dir=0x1 ossmask=0x00000800
pcm0:
pcm0: Speaker/Beep (OSS: speaker)
pcm0: |
pcm0: +- nid: 20 index: 0 mute: 1 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000021
pcm0:
pcm0: Recording sources:
pcm0:
pcm0: nid=12 [audio selector]
pcm0: |
pcm0: + <- nid=16 [pin: line in (jack)] [recsrc: vol, line]
pcm0: |
pcm0: + <- nid=15 [pin: Mic in (jack)]
pcm0: |
pcm0: + <- nid=14 [pin: speaker (fixed)]
pcm0: |
pcm0: + <- nid=13 [pin: headphones out (jack)]
pcm0:
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: PCM Playback: 1
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 11 16 22 32 44 48
pcm0: DAC: 2
pcm0:
pcm0: PCM Record: 1
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 11 16 22 32 44 48
pcm0: ADC: 3
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Mixer vol is currently set to 75:75
Mixer pcm is currently set to 75:75
Mixer speaker is currently set to 75:75
Mixer line is currently set to 75:75
Mixer rec is currently set to 74:74
Recording source: mic
More information about the freebsd-multimedia
mailing list