problems with bktr0 and cheap TV card FlyVideo

[Molnár Csaba]

On Monday 24 October 2005 15.31, Georg Bege wrote:
I don't see the recording source line in your mixer output, like in here:

mcsaba at mcsaba$ mixer
Mixer vol      is currently set to  80:80
Mixer pcm      is currently set to  79:79
Mixer speaker  is currently set to  75:75
Mixer line     is currently set to  75:75
Mixer mic      is currently set to   0:0
Mixer cd       is currently set to  75:75
Mixer rec      is currently set to   0:0
Mixer ogain    is currently set to  50:50
Mixer line1    is currently set to  75:75
Mixer phin     is currently set to   0:0
Mixer phout    is currently set to   0:0
Recording source: mic

If you plugged the audio cable in line in, you should try:

mixer =rec line

> Thanks for your reply,
>
> I connect the audio cable from the tv card in line-in.
>
> Arne "W�������������������������������" wrote:
> >--- Georg Bege <therion at ninth-art.de> wrote:
> >>I've a problem on FreeBSD 6.0-RC1 with an cheap TV card,
> >>
> >>bktr0: <BrookTree 878> mem 0xec000000-0xec000fff irq 21 at
> >>device 10.0
> >>on pci2
> >>bktr0: [GIANT-LOCKED]
> >>bktr0: Card has no configuration EEPROM. Cannot determine card
> >>make.
> >>bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
> >>
> >>Im using fxtv with following command:
> >>
> >>therion at fortuna ~ % fxtv -inputFormat pal -tunerMode cable
> >>-defaultInput
> >>tuner -defaultAudioInput tuner -cableFreqSet weurope
> >>-mixerChannel line
> >>
> >>I got channels and the picture but no audio,
> >>Im using a Sound Blaster Live! Value (older card) with emu10k1
> >>which
> >>works perfectly.
> >>My machine is a Pentium 4 3.0GHz with 1024M DDR-SDRAM.
> >>
> >>Here the relevant data of my KERNCONF:
> >>
> >># bktr support
> >>device          iicbus
> >>device          iicbb
> >>device          smbus
> >>device          iicsmb
> >>device          bktr
> >>options         BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
> >>
> >>Some sysctl entries in /etc/sysctl.conf:
> >>
> >>hw.bt848.card=10
> >>hw.bt848.tuner=10
> >>
> >>mixer settings:
> >>
> >>Mixer vol      is currently set to 100:100
> >>Mixer pcm      is currently set to  81:81
> >>Mixer speaker  is currently set to  75:75
> >>Mixer line     is currently set to  95:95
> >>Mixer mic      is currently set to   0:0
> >>Mixer cd       is currently set to  75:75
> >>Mixer rec      is currently set to   0:0
> >>Mixer line1    is currently set to  75:75
> >>Mixer phin     is currently set to   0:0
> >>Mixer phout    is currently set to   0:0
> >>Mixer video    is currently set to  75:75
> >>
> >>PS: Soundcard works on GNU/Linux, just wanted to say that it is
> >>impossible that the card is broken/damaged.
> >
> >Where did you connect the audio connector? To the mic-in, line-in
> >or cd-in? Or does the TV card send the audio data via PCI to the
> >bktr driver?
> >
> >My pinnacle TV card sends the audio data via a cable to the cd-in
> >connector...
> >
> >-Arne
> >
> >
> >
> >
> >__________________________________
> >Start your day with Yahoo! - Make it your home page!
> >http://www.yahoo.com/r/hs
>
> _______________________________________________
> freebsd-multimedia at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> To unsubscribe, send any mail to
> "freebsd-multimedia-unsubscribe at freebsd.org"