problems with bktr0 and cheap TV card FlyVideo

Georg Bege therion at ninth-art.de
Mon Oct 24 06:31:34 PDT 2005


Thanks for your reply,

I connect the audio cable from the tv card in line-in.

Arne "W�������������������������������" wrote:

>--- Georg Bege <therion at ninth-art.de> wrote:
>  
>
>>I've a problem on FreeBSD 6.0-RC1 with an cheap TV card,
>>
>>bktr0: <BrookTree 878> mem 0xec000000-0xec000fff irq 21 at
>>device 10.0 
>>on pci2
>>bktr0: [GIANT-LOCKED]
>>bktr0: Card has no configuration EEPROM. Cannot determine card
>>make.
>>bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
>>
>>Im using fxtv with following command:
>>
>>therion at fortuna ~ % fxtv -inputFormat pal -tunerMode cable
>>-defaultInput 
>>tuner -defaultAudioInput tuner -cableFreqSet weurope
>>-mixerChannel line
>>
>>I got channels and the picture but no audio,
>>Im using a Sound Blaster Live! Value (older card) with emu10k1
>>which 
>>works perfectly.
>>My machine is a Pentium 4 3.0GHz with 1024M DDR-SDRAM.
>>
>>Here the relevant data of my KERNCONF:
>>
>># bktr support
>>device          iicbus
>>device          iicbb
>>device          smbus
>>device          iicsmb
>>device          bktr
>>options         BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL 
>>
>>Some sysctl entries in /etc/sysctl.conf:
>>
>>hw.bt848.card=10
>>hw.bt848.tuner=10
>>
>>mixer settings:
>>
>>Mixer vol      is currently set to 100:100
>>Mixer pcm      is currently set to  81:81
>>Mixer speaker  is currently set to  75:75
>>Mixer line     is currently set to  95:95
>>Mixer mic      is currently set to   0:0
>>Mixer cd       is currently set to  75:75
>>Mixer rec      is currently set to   0:0
>>Mixer line1    is currently set to  75:75
>>Mixer phin     is currently set to   0:0
>>Mixer phout    is currently set to   0:0
>>Mixer video    is currently set to  75:75
>>
>>PS: Soundcard works on GNU/Linux, just wanted to say that it is 
>>impossible that the card is broken/damaged.
>>
>>    
>>
>Where did you connect the audio connector? To the mic-in, line-in
>or cd-in? Or does the TV card send the audio data via PCI to the
>bktr driver?
>
>My pinnacle TV card sends the audio data via a cable to the cd-in
>connector...
>
>-Arne
>
>
>
>		
>__________________________________ 
>Start your day with Yahoo! - Make it your home page! 
>http://www.yahoo.com/r/hs
>  
>



More information about the freebsd-multimedia mailing list