geom_uzip need xz device

[Warner Losh]

On Sun, Mar 10, 2019 at 3:19 PM Ian Lepore <ian at freebsd.org> wrote:

> On Sat, 2019-03-09 at 10:16 +0900, Mori Hiroki wrote:
> > Hi
> >
> > ----- Original Message -----
> > > From: Ian Lepore <ian at freebsd.org>
> > > To: Mori Hiroki <yamori813 at yahoo.co.jp>; "freebsd-mips at freebsd.org"
> > > <freebsd-mips at freebsd.org>
> > > Cc:
> > > Date: 2019/3/6, Wed 01:01
> > > Subject: Re: geom_uzip need xz device
> > >
> > > On Tue, 2019-03-05 at 10:46 +0900, Mori Hiroki wrote:
> > > >  Hi
> > > >
> > > >  Also change device name.
> > > >
> > > >  New: flash/mx25l0s.rootfs.uzip
> > > >  Old: flash/spi0s.rootfs.uzip
> > > >
> > > >  Be careful update system.
> > > >
> > > >  Hiroki Mori
> > > >
> > > >
> > >
> > > This is an unexpected effect of a change I made to remove a
> > > conflict
> > > between the mx25l and at45d drivers.  I'll try to fix it, and if I
> > > can't, I'll revert the change (mx25l is used far more than at45d,
> > > and
> > > keeping it compatible with the past is more important).
> >
> > Thanks consider this issue.
> >
> > Now also not work geom_redboot.c. Because of spi is hard code.
> >
> > Regards
> >
> > Hiroki Mori
> >
>
> I tried to fix the geom layer so that the disk alias feature would work
> right with with geom_flashmap and geom_redboot, but that turns out to
> be very hard to do.  So instead I just partially reverted r344526;
> devices using the mx25l driver will use the /dev/flash/spi* names again
> beginning with r344981.
>
> Sorry for breaking this.
>

The fault is partially mine... The disk alias stuff I committed wasn't
quite ready for prime time...

Warner