USB support for RMI processors

[Randall Stewart]

Hmm I might have missed these.. I got some in.

The n32 ones I will leave for Warner to look at..

I personally think we should be working on n64 not n32.. But
I will go with whatever our fearless leader says (the passer
of the cold)..

R
On Mar 1, 2010, at 6:32 AM, C. Jayachandran wrote:

> Hi Randy,
>
> I'd send these patches last week, did you get a chance to look over
> them?  Let me know if you have any comments.
>
> Also, let me know if this is your preferred way for changes, otherwise
> I can send them as attachments too. The mailing list will strip the
> attachments, but your copy would be safe.
>
> Thanks,
> JC.
>
> On Tue, Feb 23, 2010 at 1:51 PM, C. Jayachandran
> <c.jayachandran at gmail.com> wrote:
>> I've two patches to add USB EHCI support for XLS processors. This  
>> is tested
>> with umass driver on a USB attached disk and flash drive. Please  
>> review -
>> I've left the original NetBSD license on xls_ehci.c (which came from
>> ehci_pci.c), I hope this is not an issue.
>>
>> http://sites.google.com/site/cjayachandran/files/iodi-bus.patch
>> - Move rmi_pci_bus_space to header and avoid extern
>> - remove unused and commented code (MIPS_BUS_SPACE_PCI, pic_usb_ack)
>> - use rmi_pci_bus_space for USB too (needs byteswap)
>>
>> http://sites.google.com/site/cjayachandran/files/xls-ehci.patch
>> - uncomment xls_ehci.c in files.xlr
>> - changes to xls_ehci.c - updated with dev/usb/controller/ehci_*.c as
>> reference
>>
>> The files sys/mips/rmi/ehcireg.h and sys/mips/rmi/ehcivar.h can be  
>> deleted
>> since they are not used now. Also sys/mips/rmi/pcibus.c is unused.
>>
>> Thanks,
>> JC.
>>
>
>
>
> -- 
> C. Jayachandran    c.jayachandran at gmail.com
>

------------------------------
Randall Stewart
803-317-4952 (cell)
803-345-0391(direct)