ppp & lqr problem - Warning: lqr_RecvEcho: Got packet size 6, expecting 12 !

[Alen Sarkinovic]

Sten, thanks for your reply, actually I already sent an email to tech
support and waiting for response.
I'm stuck with this issue and hope that community on this list  will help
with more information's.

I have to say that InnoMedia MTA 3328-2R  is working  on Cisco UBR7200 CMTS
pppoe termination system.


Thanks again,
Alen

----- Original Message ----- 
From: "Sten Daniel Sørsdal" <lists at wm-access.no>
To: "Alen Sarkinovic" <alen at smartnet.ba>
Cc: <freebsd-isp at freebsd.org>
Sent: Monday, April 10, 2006 3:33 AM
Subject: Re: ppp & lqr problem - Warning: lqr_RecvEcho: Got packet size 6,
expecting 12 !


Alen Sarkinovic wrote:
>
> I'm using freeBSD 5.5-PRERELEASE #1 with pppd version 2.3 patch level 5
for
> pppoe termination on cable network system for a long time but today one of
> our customers reported problem regarding reconection every 2 minutes.
> Actualy customer is trying to connect InnoMedia MTA 3328-2R device
> (Net2Phone Service) using build in pppoe client software.
>
> I get this error from ppp.log ->

In reference to page 36 in:

http://cs.uni-bonn.de/ppp/rfc/rfc1661.txt

It's supposed to be 6 bytes (minimum). Initially echo's were no more
than 6 bytes (not considering any padding). In the later RFC's a Data
field was added which must be copied into Echo-Reply packet.
It is possible that FreeBSD adds 6 bytes but the InnoMedia device does
not respect this?

In which case you might want to modify ppp or (better) contact InnoMedia
to get an updated firmware?

-- 
Sten Daniel Sørsdal