wheel mouse doesn't work in 2.6.1
Frank DiPrete
fdiprete at comcast.net
Sun Aug 15 09:20:34 PDT 2004
I just finished the upgrade to gnome 2.6.1 (whew) on FreeBSD 5.2.1
The mouse wheel does not work. I have tried imwheel also without
success.
5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0
following is my rc.conf and X config file:
**********************XF86Config***************
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining
a
# copy of this software and associated documentation files (the
"Software"),
# to deal in the Software without restriction, including without
limitation
# the rights to use, copy, modify, merge, publish, distribute,
sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be
included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project
shall
# not be used in advertising or otherwise to promote the sale, use or
other
# dealings in this Software without prior written authorization from
the
# XFree86 Project.
#
#
**********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
#
**********************************************************************
#
**********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
#
**********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA
extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
#
**********************************************************************
# Files section. This allows default font and rgb paths to be set
#
**********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated
together),
# as well as specifying multiple comma-separated entries in one
FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or
other
# programs take long to start up, try moving the Type1 and Speedo
directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
#
**********************************************************************
# Server flags section.
#
**********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
#
**********************************************************************
# Input devices
#
**********************************************************************
#
**********************************************************************
# Core keyboard's InputDevice section
#
**********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
#
**********************************************************************
# Core Pointer's InputDevice section
#
**********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
# Option "Protocol" "Auto"
# Option "Protocol" "PS/2"
Option "Protocon" "IMPS/2"
Option "Device" "/dev/sysmouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
#
**********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
#
**********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
**********************************************************************
# Monitor section
#
**********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "monitor0"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 82.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-150
EndSection
#
**********************************************************************
# Graphics device section
#
**********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to
override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this
section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should
not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "card0"
Driver "i810"
#VideoRam 32768
# Insert Clocks lines here if appropriate
EndSection
#
**********************************************************************
# Screen sections
#
**********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen
section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "card0"
Monitor "monitor0"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
#
**********************************************************************
# ServerLayout sections.
#
**********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and
right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
**********************rc.conf******************
#!/bin/sh
#
# This is rc.conf - a file full of useful variables that you can set
# to change the default startup behavior of your system. You should
# not edit this file! Put any overrides into one of the
${rc_conf_files}
# instead and you will be able to update these defaults later without
# spamming your local configuration information.
#
# The ${rc_conf_files} files should only contain values which override
# values set in this file. This eases the upgrade path when defaults
# are changed and new features are added.
#
# All arguments must be in double or single quotes.
#
# $FreeBSD: src/etc/defaults/rc.conf,v 1.191 2003/11/28 17:28:42 bms
Exp $
##############################################################
### Important initial Boot-time options ####################
##############################################################
rc_debug="NO" # Set to YES to enable debugging output from
rc.d
rc_info="NO" # Enables display of informational messages at
boot.
rcshutdown_timeout="30" # Seconds to wait before terminating
rc.shutdown
swapfile="NO" # Set to name of swapfile if aux swapfile
desired.
apm_enable="NO" # Set to YES to enable APM BIOS functions (or
NO).
apmd_enable="NO" # Run apmd to handle APM event from userland.
apmd_flags="" # Flags to apmd (if enabled).
devd_enable="NO" # Run devd, to trigger programs on device tree
changes.
kldxref_enable="NO" # Build linker.hints files with kldxref(8).
kldxref_clobber="NO" # Overwrite old linker.hints at boot.
kldxref_module_path="" # Override kern.module_path. A ';'-delimited
list.
pccard_enable="NO" # Set to YES if you want to configure PCCARD
devices.
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory
address.
pccard_beep="2" # pccard beep type.
pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or
NO).
pccardd_flags="-z" # Additional flags for pccardd.
pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file
pccard_ether_delay="5" # Delay before trying to start dhclient in
pccard_ether
removable_interfaces="" # Removable network interfaces for /etc/
pccard_ether.
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup
script dirs.
script_name_sep=" " # Change if your startup scripts' names contain
spaces
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
# Experimental - test before enabling
gbde_autoattach_all="NO" # YES automatically mounts gbde devices from
fstab
gbde_devices="NO" # Devices to automatically attach (list, or
AUTO)
fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen
fails.
background_fsck="YES" # Attempt to run fsck in the background where
possible.
background_fsck_delay="60" # Time to wait (seconds) before starting the
fsck.
netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net
filesystems.
extra_netfs_types="NO" # List of network extra filesystem types for
delayed
# mount at startup (or NO).
##############################################################
### Network configuration sub-section ######################
##############################################################
### Basic network and firewall/security options: ###
hostname="" # Set this!
nisdomainname="NO" # Set to NIS domain if using NIS (or
NO).
dhclient_program="/sbin/dhclient" # Path to dhcp client program.
dhclient_flags="" # Additional flags to pass to dhcp
client.
background_dhclient="NO" # Start dhcp client in the background.
firewall_enable="NO" # Set to YES to enable firewall
functionality
firewall_script="/etc/rc.firewall" # Which script to run to set up the
firewall
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
firewall_quiet="NO" # Set to YES to suppress rule display
firewall_logging="NO" # Set to YES to enable events logging
firewall_flags="" # Flags passed to ipfw when type is a
file
ip_portrange_first="NO" # Set first dynamically allocated port
ip_portrange_last="NO" # Set last dynamically allocated port
ike_enable="NO" # Enable IKE daemon (usually racoon or
isakmpd)
ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
ike_flags="" # Additional flags for IKE daemon
ipsec_enable="NO" # Set to YES to run setkey on
ipsec_file
ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
natd_program="/sbin/natd" # path to natd, if you want a different
one.
natd_enable="NO" # Enable natd (if firewall_enable ==
YES).
natd_interface="" # Public interface or IPaddress to use.
natd_flags="" # Additional flags for natd.
ipfilter_enable="NO" # Set to YES to enable ipfilter
functionality
ipfilter_program="/sbin/ipf" # where the ipfilter program lives
ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter,
see
# /usr/src/contrib/ipfilter/rules for
examples
ipfilter_flags="" # additional flags for ipfilter
ipnat_enable="NO" # Set to YES to enable ipnat
functionality
ipnat_program="/sbin/ipnat" # where the ipnat program lives
ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
ipnat_flags="" # additional flags for ipnat
ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter
or ipnat
ipmon_program="/sbin/ipmon" # where the ipfilter monitor program
lives
ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/
ipflog"
ipfs_enable="NO" # Set to YES to enable saving and
restoring
# of state tables at shutdown and boot
ipfs_program="/sbin/ipfs" # where the ipfs program lives
ipfs_flags="" # additional flags for ipfs
tcp_extensions="YES" # Set to NO to turn off RFC1323
extensions.
log_in_vain="0" # >=1 to log connects to ports w/o
listeners.
tcp_keepalive="YES" # Enable stale TCP connection timeout
(or NO).
# For the following option you need to have TCP_DROP_SYNFIN set in your
# kernel. Please refer to LINT and NOTES for details.
tcp_drop_synfin="NO" # Set to YES to drop TCP packets with
SYN+FIN
# NOTE: this violates the TCP
specification
icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT
packets
icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT
packets
network_interfaces="auto" # List of network interfaces (or
"auto").
cloned_interfaces="" # List of cloned network interfaces to
create.
#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
ifconfig_lo0="inet 127.0.0.1" # default loopback device
configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample
alias entry.
#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family
entry.
#
# If you have any sppp(4) interfaces above, you might also want to set
# the following parameters. Refer to spppcontrol(8) for their meaning.
sppp_interfaces="" # List of sppp interfaces.
#sppp_interfaces="isp0" # example: sppp over ISDN
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top
secret' hisauthname=some-gw hisauthsecret='another secret'"
gif_interfaces="NO" # List of GIF tunnels (or "NO").
#gif_interfaces="gif0 gif1" # Examples typically for a router.
# Choose correct tunnel addrs.
#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a
router.
#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a
router.
# User ppp configuration.
ppp_enable="NO" # Start user-ppp (or NO).
ppp_mode="auto" # Choice of "auto", "ddial", "direct" or
"dedicated".
# For details see man page for ppp(8). Default
is auto.
ppp_nat="YES" # Use PPP's internal network address
translation or NO.
ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
ppp_user="root" # Which user to run ppp as
### Network daemon (miscellaneous) ###
syslogd_enable="YES" # Run syslog daemon (or NO).
syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a
different one.
syslogd_flags="-s" # Flags to syslogd (if enabled).
#syslogd_flags="-ss" # Syslogd flags to not bind an inet
socket
inetd_enable="NO" # Run the network daemon dispatcher
(YES/NO).
inetd_program="/usr/sbin/inetd" # path to inetd, if you want a
different one.
inetd_flags="-wW -C 60" # Optional flags to inetd
#
# named. It may be possible to run named in a sandbox, man security
for
# details.
#
named_rcng="NO" # XXX Temporary. Enable to use new rc
# functionality in support of named.
See
# variables below.
named_enable="NO" # Run named, the DNS server (or NO).
named_program="/usr/sbin/named" # path to named, if you want a
different one.
named_flags="-u bind -g bind" # Flags for named
named_pidfile="/var/run/named/pid" # Pid file
named_chrootdir="" # Chroot directory (or "" not to auto-
chroot it)
named_chroot_autoupdate="YES" # Automatically install/update chrooted
# components of named. See /etc/rc.d/
named.
named_symlink_enable="YES" # Symlink ${named_pidfile} and /var/
run/ndc
# to their chrooted counterparts.
#
# kerberos. Do not run the admin daemons on slave servers
#
kerberos5_server_enable="NO" # Run a kerberos 5 master server (or
NO).
kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
kadmind5_server_enable="NO" # Run kadmind (or NO)
kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin
daemon
kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd
daemon
rwhod_enable="NO" # Run the rwho daemon (or NO).
rwhod_flags="" # Flags for rwhod
rarpd_enable="NO" # Run rarpd (or NO).
rarpd_flags="" # Flags to rarpd.
bootparamd_enable="NO" # Run bootparamd (or NO).
bootparamd_flags="" # Flags to bootparamd
pppoed_enable="NO" # Run the PPP over Ethernet daemon.
pppoed_provider="*" # Provider and ppp(8) config file
entry.
pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
pppoed_interface="fxp0" # The interface that pppoed runs on.
sshd_enable="NO" # Enable sshd
sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different
one.
sshd_flags="" # Additional flags for sshd.
### Network daemon (NFS): All need rpcbind_enable="YES" ###
amd_enable="NO" # Run amd service with $amd_flags (or
NO).
amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
amd_map_program="NO" # Can be set to "ypcat -k amd.master"
nfs_client_enable="NO" # This host is an NFS client (or NO).
nfs_access_cache="2" # Client cache timeout in seconds
nfs_server_enable="NO" # This host is an NFS server (or NO).
nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
mountd_enable="NO" # Run mountd (or NO).
mountd_flags="-r" # Flags to mountd (if NFS server
enabled).
weak_mountd_authentication="NO" # Allow non-root mount requests to be
served.
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or
NO).
nfs_bufpackets="" # bufspace (in packets) for client
rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/
server.
rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/
server.
rpcbind_enable="NO" # Run the portmapper service (YES/NO).
rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want
a different one.
rpcbind_flags="" # Flags to rpcbind (if enabled).
rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or
NO).
keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
keyserv_flags="" # Flags to keyserv (if enabled).
### Network Time Services options: ###
timed_enable="NO" # Run the time daemon (or NO).
timed_flags="" # Flags to timed (if enabled).
ntpdate_enable="NO" # Run ntpdate to sync time on boot (or
NO).
ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want
a different one.
ntpdate_flags="-b" # Flags to ntpdate (if enabled).
ntpd_enable="NO" # Run ntpd Network Time Protocol (or
NO).
ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different
one.
ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
# Flags to ntpd (if enabled).
# Network Information Services (NIS) options: All need
rpcbind_enable="YES" ###
nis_client_enable="NO" # We're an NIS client (or NO).
nis_client_flags="" # Flags to ypbind (if enabled).
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
nis_ypset_flags="" # Flags to ypset (if enabled).
nis_server_enable="NO" # We're an NIS server (or NO).
nis_server_flags="" # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or
NO).
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
### Network routing options: ###
defaultrouter="NO" # Set to default gateway (or NO).
static_routes="" # Set to static route list (or leave
empty).
natm_static_routes="" # Set to static route list for NATM (or
leave empty).
gateway_enable="NO" # Set to YES if this host will be a
gateway.
router_enable="NO" # Set to YES to enable a routing
daemon.
router="/sbin/routed" # Name of routing daemon to use if
enabled.
router_flags="-q" # Flags for routing daemon.
mrouted_enable="NO" # Do multicast routing (see /etc/
mrouted.conf).
mrouted_flags="" # Flags for multicast routing daemon.
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
ipxrouted_enable="NO" # Set to YES to run the IPX routing
daemon.
ipxrouted_flags="" # Flags for IPX routing daemon.
arpproxy_all="NO" # replaces obsolete kernel option
ARP_PROXYALL.
forward_sourceroute="NO" # do source routing (only if
gateway_enable is set to "YES")
accept_sourceroute="NO" # accept source routed packets to us
### ATM interface options: ###
atm_enable="NO" # Configure ATM interfaces (or NO).
#atm_netif_hea0="atm 1" # Network interfaces for physical
interface.
#atm_sigmgr_hea0="uni31" # Signalling manager for physical
interface.
#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or
ILMI).
#atm_macaddr_hea0="NO" # Override physical MAC address (or
NO).
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00"
# ATMARP server address (or local).
#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface
(or NO).
atm_pvcs="" # Set to PVC list (or leave empty).
atm_arps="" # Set to permanent ARP list (or leave
empty).
### ISDN interface options: (see also: /usr/share/examples/isdn) ###
isdn_enable="NO" # Enable the ISDN subsystem (or NO).
isdn_fsdev="NO" # Output device for fullscreen mode (or
NO for daemon mode).
isdn_flags="-dn -d0x1f9" # Flags for isdnd
isdn_ttype="cons25" # terminal type for fullscreen mode
isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
isdn_trace="NO" # Enable the ISDN trace subsystem (or
NO).
isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
### Miscellaneous network options: ###
icmp_bmcastecho="NO" # respond to broadcast ping packets
### IPv6 options: ###
ipv6_enable="NO" # Set to YES to set up for IPv6.
ipv6_network_interfaces="auto" # List of network interfaces (or
"auto").
ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
ipv6_static_routes="" # Set to static route list (or leave
empty).
#ipv6_static_routes="xxx" # An example to set
fec0:0000:0000:0006::/64
# route toward loopback interface.
#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
ipv6_gateway_enable="NO" # Set to YES if this host will be a
gateway.
ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing
daemon.
ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
ipv6_router_flags="" # Flags to IPv6 routing daemon.
#ipv6_router_flags="-l" # Example for route6d with only IPv6
site local
# addrs.
#ipv6_router_flags="-q" # If you want to run a routing daemon
on an end
# node, you should stop advertisement.
#ipv6_network_interfaces="ed0 ep0" # Examples for router
# or static configuration for
end node.
# Choose correct prefix value.
#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples
for rtr.
#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples
for rtr.
#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign
entry
#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias
entry.
ipv6_default_interface="NO" # Default output interface for scoped
addrs.
# Now this works only for IPv6 link
local
# multicast addrs.
rtsol_flags="" # Flags to IPv6 router solicitation.
rtadvd_enable="NO" # Set to YES to enable an IPv6 router
# advertisement daemon. If set to YES,
# this router becomes a possible
candidate
# IPv6 default router for local
subnets.
rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
mroute6d_enable="NO" # Do IPv6 multicast routing.
mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6
multicast
# routing daemon. You
need to
# install it from
package or
# port.
mroute6d_flags="" # Flags to IPv6 multicast routing
daemon.
stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over
IPv4
# tunneling interface. Specify this
entry
# to enable 6to4 interface.
stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
# to limit peer addr range. Effective
value
# is 0-31.
stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
# If you like, you can set "AUTO" for
this.
stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
# IPv6-to-IPv4 TCP translator. You
also need
# faithd(8) setup.
ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped
IPv6 addr
# communication. (like ::ffff:a.b.c.d)
ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
# functionality
ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set
up the IPv6 firewall
ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/
rc.firewall6)
ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
ipv6_firewall_logging="NO" # Set to YES to enable events logging
ipv6_firewall_flags="" # Flags passed to ip6fw when type is a
file
ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for
ipfilter,
# see /usr/src/contrib/
ipfilter/rules
# for examples
##############################################################
### System console options #################################
##############################################################
keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or
NO).
keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
keybell="NO" # See kbdcontrol(1) for options. Use "off" to
disable.
keychange="NO" # function keys default values (or NO).
cursor="NO" # cursor type {normal|blink|destructive} (or
NO).
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/*
(or NO).
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or
NO).
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or
NO).
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or
NO).
blanktime="300" # blank time (in seconds) or "NO" to turn it
off.
saver="NO" # screen saver: Uses /boot/kernel/${saver}
_saver.ko
moused_enable="YES" # Run the mouse daemon.
moused_type="auto" # See man page for rc.conf(5) for available
settings.
moused_port="/dev/psm0" # Set to your mouse port.
moused_flags="-z4" # Any additional flags to moused.
mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in
your
# language code table, specify alternative
range
# start like mousechar_start=3, see vidcontrol
(1)
allscreens_flags="" # Set this vidcontrol mode for all virtual
screens
allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual
screens
##############################################################
### pcvt console driver options ############################
##############################################################
pcvt_verbose="NO" # set to YES to enable verbose configuration
messages
pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt
(or NO).
pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec)
(or NO).
pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec)
(or NO).
pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO).
pcvt_force24="NO" # force a 24 line display (when 25 possible)
(or NO).
pcvt_hpext="NO" # use HP extensions (function keys labels) (or
NO).
pcvt_lines="NO" # lines (25, 28, 40, 50 or NO).
pcvt_blanktime="NO" # blank time (in seconds) (or NO).
pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or
NO).
pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or
NO).
pcvt_monohigh="NO" # set intensity to high on monochrome monitors
(or NO).
##############################################################
### Mail Transfer Agent (MTA) options ######################
##############################################################
mta_start_script="/etc/rc.sendmail"
# Script to start your chosen MTA, called by /
etc/rc.
# Settings for /etc/rc.sendmail:
sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
sendmail_submit_enable="YES" # Start a localhost-only MTA for mail
submission
sendmail_submit_flags="-L sm-mta -bd -q30m -
ODaemonPortOptions=Addr=localhost"
# Flags for localhost-only MTA
sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail
(outbound only)
sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/
NO).
sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
# Flags for sendmail_msp_queue daemon.
##############################################################
### Miscellaneous administrative options ###################
##############################################################
cron_enable="YES" # Run the periodic job daemon.
cron_program="/usr/sbin/cron" # Which cron executable to run (if
enabled).
cron_flags="" # Which options to pass to the cron daemon.
lpd_enable="NO" # Run the line printer daemon.
lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different
one.
lpd_flags="" # Flags to lpd (if enabled).
usbd_enable="NO" # Run the usbd daemon.
usbd_flags="" # Flags to usbd (if enabled).
dumpdev="NO" # Device name to crashdump to (or NO).
dumpdir="/var/crash" # Directory where crash dumps are to be stored
savecore_flags="" # Used if dumpdev is enabled above, and
present.
enable_quotas="NO" # turn on quotas on startup (or NO).
check_quotas="YES" # Check quotas on startup (or NO).
accounting_enable="NO" # Turn on process accounting (or NO).
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or
NO).
ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
sysvipc_enable="NO" # Load System V IPC primitives at startup (or
NO).
linux_enable="NO" # Linux binary compatibility loaded at startup
(or NO).
svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or
NO).
clear_tmp_enable="NO" # Clear /tmp at startup.
ldconfig_insecure="NO" # Set to YES to disable ldconfig security
checks
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
# shared library search paths
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/
local/lib/aout"
# a.out shared library search paths
kern_securelevel_enable="NO" # kernel security level (see init(8)),
kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
lomac_enable="NO" # start lomac(4) security module at boot
update_motd="YES" # update version info in /etc/motd (or NO)
start_vinum="NO" # set to YES to start vinum
unaligned_print="YES" # print unaligned access warnings on the alpha
(or NO).
entropy_file="/entropy" # Set to NO to disable caching entropy through
reboots.
# /var/db/entropy is preferred if / is not
available.
entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy
via cron.
entropy_save_sz="2048" # Size of the entropy cache files.
entropy_save_num="8" # Number of entropy cache files to save.
harvest_interrupt="YES" # Entropy device harvests interrupt randomness
harvest_ethernet="YES" # Entropy device harvests ethernet randomness
harvest_p_to_p="YES" # Entropy device harvests point-to-point
randomness
dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
watchdogd_enable="NO" # Start the software watchdog daemon
devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files
containing
# devfs(8)
rules.
devfs_system_ruleset="" # The name of a ruleset to apply to /dev
##############################################################
### Jail Configuration #######################################
##############################################################
jail_enable="NO" # Set to NO to disable starting of any jails
jail_list="" # Space separated list of names of jails
jail_set_hostname_allow="YES" # Allow root user in a jail to change its
hostname
jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
jail_stop_jailer="NO" # Only stop jailer. Requires jail_*_exec be set
# to use sysutils/jailer port to start the
jail.
#
# To use rc's built-in jail infrastructure create entries for
# each jail, specified in jail_list, with the following variables.
# NOTE: replace 'example' with the jail's name.
#
#jail_example_rootdir="/usr/jail/default" # Jail's root directory
#jail_example_hostname="default.domain.com" # Jail's hostname
#jail_example_ip="192.168.0.10" # Jail's IP number
#jail_example_exec="/bin/sh /etc/rc" # command to execute in
jail
#jail_example_devfs_enable="NO" # mount devfs in the
jail
#jail_example_fdescfs_enable="NO" # mount fdescfs in the
jail
#jail_example_procfs_enable="NO" # mount procfs in jail
#jail_example_devfs_ruleset="123" # devfs ruleset to
apply to jail
##############################################################
### Define source_rc_confs, the mechanism used by /etc/rc.* ##
### scripts to source rc_conf_files overrides safely. ##
##############################################################
if [ -z "${source_rc_confs_defined}" ]; then
source_rc_confs_defined=yes
source_rc_confs () {
local i sourced_files
for i in ${rc_conf_files}; do
case ${sourced_files} in
*:$i:*)
;;
*)
sourced_files="${sourced_files}:$i:"
if [ -r $i ]; then
. $i
fi
;;
esac
done
}
fi
More information about the freebsd-gnome
mailing list