FileRoller Install stops

[Mezz bsdforums.org]

>>It ran for a while, but I still get exactly the same errors.
>>
>>I copied and pasted exactly what you have below.
>
>Are you kidding or being serious? If you copied and pasted exactly; it 
>won't finish in less than thirty minutes and even an hour too. Did you 
>CVSup your ports tree to update it, before you ran this command?

BTW: I recommend you to run 'portsclean -C' to clean all of your ports tree.

Cheers,
Mezz

>>
>>-----------------------
>>Joe Mom
>>     "Drain us of life and cleanse the mess"
>>                                 MuDvAyNe
>>-----------------------
>>
>>-----Original Message-----
>>From: Joe Marcus Clarke [mailto:marcus at marcuscom.com]
>>Sent: Saturday, April 05, 2003 9:38 PM
>>To: Joe Mom
>>Cc: freebsd-gnome at freebsd.org
>>Subject: RE: FileRoller Install stops
>>
>>On Sat, 2003-04-05 at 21:36, Joe Mom wrote:
>> > Doesn't look like that did anything.
>>
>>Then you didn't do it right.  That command should run for a pretty long
>>time.
>>
>>Joe
>>
>> >
>> > It appears all is almost lost, even Joe has run out of ideas :)
>> >
>> >
>> > -----------------------
>> > Joe Mom
>> >     "Drain us of life and cleanse the mess"
>> >                                 MuDvAyNe
>> > -----------------------
>> >
>> > -----Original Message-----
>> > From: Joe Marcus Clarke [mailto:marcus at marcuscom.com]
>> > Sent: Saturday, April 05, 2003 9:02 PM
>> > To: Joe Mom
>> > Cc: freebsd-gnome at freebsd.org
>> > Subject: RE: FileRoller Install stops
>> >
>> > On Sat, 2003-04-05 at 20:13, Joe Mom wrote:
>> > > Here is what I get while trying to install from the ports tree.
>> >
>> > You should run portupgrade -rf pkgconfig.  This will force a rebuild
>>of
>> > all GNOME bits.  That should clear up these errors.
>> >
>> > Joe
>> >
>> > >
>> > >
>> > ><snip>
>> > >
>> > > -----------------------
>> > > Joe Mom
>> > >     "Drain us of life and cleanse the mess"
>> > >                                 MuDvAyNe
>> > > -----------------------
>> > >
>> > > -----Original Message-----
>> > > From: Joe Marcus Clarke [mailto:marcus at marcuscom.com]
>> > > Sent: Saturday, April 05, 2003 8:03 PM
>> > > To: Joe Mom
>> > > Cc: 'Mezz bsdforums.org'; freebsd-gnome at freebsd.org
>> > > Subject: RE: FileRoller Install stops
>> > >
>> > > On Sat, 2003-04-05 at 20:01, Joe Mom wrote:
>> > > > First off :
>> > > >
>> > > > Why don't you use the ports tree? To compile/install on your own
>> > hand
>> > > > without use ports tree, you need to use 'gmake' instead 'make'.
>> > > >
>> > > > I tried compiling from ports tree with worse errors. This is why I
>> > > > turned to manual compiling.
>> > >
>> > > What errors did you get when doing the port install?
>> > >
>> > > Joe
>> > >
>> > > >
>> > > > During the install it switches to gmake automagically. :)
>> > > >
>> > > > I need this program for gnome 2.2 to finish its install.
>> > > >
>> > > > -----------------------
>> > > > Joe Mom
>> > > >     "Drain us of life and cleanse the mess"
>> > > >                                 MuDvAyNe
>> > > > -----------------------
>> > > >
>> > > > -----Original Message-----
>> > > > From: Mezz bsdforums.org [mailto:reigncracks at hotmail.com]
>> > > > Sent: Saturday, April 05, 2003 7:48 PM
>> > > > To: compuman00 at hotmail.com
>> > > > Cc: freebsd-gnome at freebsd.org
>> > > > Subject: Re: FileRoller Install stops
>> > > >
>> > > > >Hi,
>> > > > >
>> > > > >I am wondering if anyone has heard of this before or if you might
>> > > have
>> > > > >any ideas for me.
>> > > > >
>> > > > >I am trying to install file roller 2.2.3 (for gnome 2.2) and
>>after
>> > I
>> > > > do:
>> > > > >
>> > > > ># ./configure
>> > > > ># make install clean
>> > > >
>> > > > Why don't you use the ports tree? To compile/install on your own
>> > hand
>> > > > without use ports tree, you need to use 'gmake' instead 'make'.
>> > > >
>> > > > >The install seems to hang for ever about 1 minute into the
>>install.
>> > > > >
>> > > > >Here is the last line I see ...
>> > > > >
>> > > > >"echo "#include \"fr-marshal.h\"" > fr-marshal.c &&
>> > > > >/usr/local/bin/glib-genmarshal  --body --prefix=fr_marshal >>
>> > > > >fr-marshal.c"
>> > > >
>> > > > --prefix=fr_marshal ??? Is it such of directory in your system?
>> > > >
>> > > > Cheers,
>> > > > Mezz
>> > > >
>> > > > >and it never goes any further.
>> > > > >
>> > > > >I have attempted to install 2.1.5 as well with the same results.
>> > > > >
>> > > > >I can't seem to find any documentation online, otherwise I
>>wouldn't
>> > > bug
>> > > > >you guys.
>> > > > >
>> > > > >
>> > > > >-----------------------
>> > > > >Joe Mom
>> > > > >     "Drain us of life and cleanse the mess"
>> > > > >                                 MuDvAyNe
>> > > > >-----------------------

_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.  
http://join.msn.com/?page=features/featuredemail