FileRoller Install stops

[Mezz bsdforums.org]

>It ran for a while, but I still get exactly the same errors.
>
>I copied and pasted exactly what you have below.

Are you kidding or being serious? If you copied and pasted exactly; it won't 
finish in less than thirty minutes and even an hour too. Did you CVSup your 
ports tree to update it, before you ran this command?

>
>-----------------------
>Joe Mom
>     "Drain us of life and cleanse the mess"
>                                 MuDvAyNe
>-----------------------
>
>-----Original Message-----
>From: Joe Marcus Clarke [mailto:marcus at marcuscom.com]
>Sent: Saturday, April 05, 2003 9:38 PM
>To: Joe Mom
>Cc: freebsd-gnome at freebsd.org
>Subject: RE: FileRoller Install stops
>
>On Sat, 2003-04-05 at 21:36, Joe Mom wrote:
> > Doesn't look like that did anything.
>
>Then you didn't do it right.  That command should run for a pretty long
>time.
>
>Joe
>
> >
> > It appears all is almost lost, even Joe has run out of ideas :)
> >
> >
> > -----------------------
> > Joe Mom
> >     "Drain us of life and cleanse the mess"
> >                                 MuDvAyNe
> > -----------------------
> >
> > -----Original Message-----
> > From: Joe Marcus Clarke [mailto:marcus at marcuscom.com]
> > Sent: Saturday, April 05, 2003 9:02 PM
> > To: Joe Mom
> > Cc: freebsd-gnome at freebsd.org
> > Subject: RE: FileRoller Install stops
> >
> > On Sat, 2003-04-05 at 20:13, Joe Mom wrote:
> > > Here is what I get while trying to install from the ports tree.
> >
> > You should run portupgrade -rf pkgconfig.  This will force a rebuild
>of
> > all GNOME bits.  That should clear up these errors.
> >
> > Joe
> >
> > >
> > >
> > ><snip>
> > >
> > > -----------------------
> > > Joe Mom
> > >     "Drain us of life and cleanse the mess"
> > >                                 MuDvAyNe
> > > -----------------------
> > >
> > > -----Original Message-----
> > > From: Joe Marcus Clarke [mailto:marcus at marcuscom.com]
> > > Sent: Saturday, April 05, 2003 8:03 PM
> > > To: Joe Mom
> > > Cc: 'Mezz bsdforums.org'; freebsd-gnome at freebsd.org
> > > Subject: RE: FileRoller Install stops
> > >
> > > On Sat, 2003-04-05 at 20:01, Joe Mom wrote:
> > > > First off :
> > > >
> > > > Why don't you use the ports tree? To compile/install on your own
> > hand
> > > > without use ports tree, you need to use 'gmake' instead 'make'.
> > > >
> > > > I tried compiling from ports tree with worse errors. This is why I
> > > > turned to manual compiling.
> > >
> > > What errors did you get when doing the port install?
> > >
> > > Joe
> > >
> > > >
> > > > During the install it switches to gmake automagically. :)
> > > >
> > > > I need this program for gnome 2.2 to finish its install.
> > > >
> > > > -----------------------
> > > > Joe Mom
> > > >     "Drain us of life and cleanse the mess"
> > > >                                 MuDvAyNe
> > > > -----------------------
> > > >
> > > > -----Original Message-----
> > > > From: Mezz bsdforums.org [mailto:reigncracks at hotmail.com]
> > > > Sent: Saturday, April 05, 2003 7:48 PM
> > > > To: compuman00 at hotmail.com
> > > > Cc: freebsd-gnome at freebsd.org
> > > > Subject: Re: FileRoller Install stops
> > > >
> > > > >Hi,
> > > > >
> > > > >I am wondering if anyone has heard of this before or if you might
> > > have
> > > > >any ideas for me.
> > > > >
> > > > >I am trying to install file roller 2.2.3 (for gnome 2.2) and
>after
> > I
> > > > do:
> > > > >
> > > > ># ./configure
> > > > ># make install clean
> > > >
> > > > Why don't you use the ports tree? To compile/install on your own
> > hand
> > > > without use ports tree, you need to use 'gmake' instead 'make'.
> > > >
> > > > >The install seems to hang for ever about 1 minute into the
>install.
> > > > >
> > > > >Here is the last line I see ...
> > > > >
> > > > >"echo "#include \"fr-marshal.h\"" > fr-marshal.c &&
> > > > >/usr/local/bin/glib-genmarshal  --body --prefix=fr_marshal >>
> > > > >fr-marshal.c"
> > > >
> > > > --prefix=fr_marshal ??? Is it such of directory in your system?
> > > >
> > > > Cheers,
> > > > Mezz
> > > >
> > > > >and it never goes any further.
> > > > >
> > > > >I have attempted to install 2.1.5 as well with the same results.
> > > > >
> > > > >I can't seem to find any documentation online, otherwise I
>wouldn't
> > > bug
> > > > >you guys.
> > > > >
> > > > >
> > > > >-----------------------
> > > > >Joe Mom
> > > > >     "Drain us of life and cleanse the mess"
> > > > >                                 MuDvAyNe
> > > > >-----------------------

_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*  
http://join.msn.com/?page=features/junkmail