Eclipse 3.5.1

[Stephane E. Potvin]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

ken wrote:
>   Steph,
>   Thank you for your effort!!
>   I tried the patch and I had the following errors.  Would please check them?
> Also, do I better check sdktests?
> 
You should check this option only if you want/plan to run the regression tests provided by the Eclipse project. Building the
regressions tests per se doesn't take that much more time but running them will take a few hours on a fast host. If you want to run
them, just select the option and to a 'make tests' once your build is finished.

> 1) md5/sha256 for eclipse-R3_5_1-fetched-src.tar.bz2 is different.
>   I calculated;
> SHA256 (eclipse/eclipse-R3_5_1-fetched-src.tar.bz2) = 3c93115e3031686dd26c94833cd21ce26244340408a435a3b9dcd29404309c60
> MD5 (eclipse/eclipse-R3_5_1-fetched-src.tar.bz2) = 55b14de28d6768f3e429388e37d97a9c

Sigh... So it seems they changed it again. I'm putting the one I used at the same place you found the patch. You can use this one
until I have time to download the new one and check what has changed and if I need to alter my patches.
> 
> 2) "make" complains that the patch cannot find file to patch as follows;
> 
> # make
> 
>  eclipse is using libxul for gecko support, but you can
>  change that by defining WITH_GECKO to the following values:
> 
>    libxul 
> 
> ===>  Found saved configuration for eclipse-3.5.1.M20090917.0800
> ===>  Extracting for eclipse-3.5.1.M20090917.0800
> => MD5 Checksum OK for eclipse/eclipse-build-0_4_RC4.tar.gz.
> => SHA256 Checksum OK for eclipse/eclipse-build-0_4_RC4.tar.gz.
> => MD5 Checksum OK for eclipse/eclipse-R3_5_1-fetched-src.tar.bz2.
> => SHA256 Checksum OK for eclipse/eclipse-R3_5_1-fetched-src.tar.bz2.
> ===>  Patching for eclipse-3.5.1.M20090917.0800
> ===>   eclipse-3.5.1.M20090917.0800 depends on executable: ant - found
> ===>   eclipse-3.5.1.M20090917.0800 depends on executable: gpatch - found
> ===>   eclipse-3.5.1.M20090917.0800 depends on executable: zip - found
> ===>  Applying FreeBSD patches for eclipse-3.5.1.M20090917.0800
> File to patch: 
> No file found--skip this patch? [n] ^C
> => Patch patch-plugins-org.eclipse.update.core-plugins.properties failed to apply cleanly.
> => Patch(es) patch-eclipse-build applied cleanly.
> 
This should not happen. It seems that you still have old patches lying around in your 'eclipse/files' directory. Make sure that you
start with  a clean eclipse checkout and that you use the '-E' flag when you patch in order to remove empty files.

Regards,

Steph
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (FreeBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAks6IZIACgkQmdOXtTCX/nvqBQCeOIHpWRwidxNRP4vpN+lyxnzH
eBYAoId9U2uN/VX155hKWIXXOXFFIkLF
=I83U
-----END PGP SIGNATURE-----