my machine freezes if I reset it
Jim Brown
jpb at sixshooter.v6.thrupoint.net
Mon Apr 28 03:37:41 UTC 2003
Alfonso,
The freebsd-docs at freebsd.org list maintains the documentation set
for FreeBSD. Please follow up with freebsd-questions at freebsd.org.
Thanks,
jpb
===
* Alfonso Romero <ibac at prodigy.net.mx> [2003-04-27 17:37]:
> Here´s the "dmesg -a" output:
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003
> root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium/P54C (132.96-MHz 586-class CPU)
> Origin = "GenuineIntel" Id = 0x52c Stepping = 12
> Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
> real memory = 33554432 (32768K bytes)
> config> di bt0
> config> di aic0
> config> di aha0
> config> di adv0
> config> q
> avail memory = 27553792 (26908K bytes)
> Preloaded elf kernel "kernel" at 0xc051d000.
> Preloaded userconfig_script "/boot/kernel.conf" at 0xc051d09c.
> Intel Pentium detected, installing workaround for F00F bug
> md0: Malloc disk
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> isab0: <Intel 82371SB PCI to ISA bridge> at device 8.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX3 ATA controller> port 0xfe80-0xfe8f at device 8.1 on
> pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <ATI Mach64-GT graphics accelerator> at 19.0
> orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: cannot reserve I/O port range
> ed1: <PnP ISA Ethernet Adapter> at port 0x280-0x29f irq 5 on isa0
> ed1: address 00:80:ad:70:96:cc, type NE2000 (16 bit)
> ata1-slave: ATAPI identify retries exceeded
> ad0: 1628MB <IBM-DJAA-31700> [3308/16/63] at ata0-master WDMA2
> acd0: CDROM <FX600T> at ata1-master PIO3
> Mounting root from ufs:/dev/ad0s1a
> swapon: adding /dev/ad0s1b as swap device
> Automatic boot in progress...
> /dev/ad0s1a:
> FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ad0s1a:
> clean, 46920 free
> (656 frags, 5783 blocks, 1.0% fragmentation)
> /dev/ad0s1f:
> FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ad0s1f:
> clean, 128997 free
> (21 frags, 16122 blocks, 0.0% fragmentation)
> /dev/ad0s1g:
> FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ad0s1g:
> clean, 371542 free
> (19734 frags, 43976 blocks, 4.2% fragmentation)
> /dev/ad0s1e:
> FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ad0s1e:
> clean, 128811 free
> (75 frags, 16092 blocks, 0.1% fragmentation)
> Doing initial network setup:
> hostname
> .
> ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255
> inet6 fe80::280:adff:fe70:96cc%ed1 prefixlen 64 tentative scopeid
> 0x1
> ether 00:80:ad:70:96:cc
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
> inet 127.0.0.1 netmask 0xff000000
> add net default: gateway 192.168.0.100
> Additional routing options:
> TCP keepalive=YES
> .
> Routing daemons:
> .
> Additional daemons:
> syslogd
> .
> Doing additional network setup:
> .
> Starting final network daemons:
> .
> ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib
> a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
> Starting standard daemons:
> cron
> sshd
> sendmail
> sendmail-clientmqueue
> .
> Initial rc.i386 initialization:
> .
> Configuring syscons:
> blanktime
> .
> Additional ABI support:
> .
> Local package initialization:
> apache2
> .
> Additional TCP options:
> .
>
>
>
>
>
> ----- Original Message -----
> From: "Sean J. Countryman" <sean at rackoperations.com>
> To: "Alfonso Romero" <ibac at prodigy.net.mx>; "freebsd-questions"
> <freebsd-questions at freebsd.org>
> Sent: Sunday, April 27, 2003 4:20 PM
> Subject: RE: my machine freezes if I reset it
>
>
> > what does dmesg say?
> >
> > -----Original Message-----
> > From: owner-freebsd-questions at freebsd.org
> > [mailto:owner-freebsd-questions at freebsd.org]On Behalf Of Alfonso Romero
> > Sent: Sunday, April 27, 2003 2:58 PM
> > To: freebsd-questions
> > Subject: my machine freezes if I reset it
> >
> >
> > When I use the "shutdown -r now" command, my freebsd 4.8 machine starts
> the
> > rebooting process, but freezes when detecting the "pci0" device: an ATI
> Mach
> > 64 Accelerator card. If I shutdown the machine and then turn off the
> power,
> > when I turn it on again there isn´t any problem: FreeBSD goes through the
> > boot process without any trouble. What could be causing this?
> >
> >
> >
> > Thanks in advance,
> >
> > Alfonso Romero
> >
> >
> > _______________________________________________
> > freebsd-questions at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
> >
> > _______________________________________________
> > freebsd-questions at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
> >
>
>
> _______________________________________________
> freebsd-doc at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-doc
> To unsubscribe, send any mail to "freebsd-doc-unsubscribe at freebsd.org"
>
More information about the freebsd-doc
mailing list