panic on reboot w. 9.0-BETA1
Andriy Gapon
avg at FreeBSD.org
Thu Aug 4 21:31:24 UTC 2011
on 04/08/2011 23:34 kirk russell said the following:
> I tried out the i386 9 Beta this week. I get a panic when I reboot.
Are sure of that?
Searching for word "panic" turns up nothing.
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2011 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.0-BETA1 #0: Thu Jul 28 16:34:16 UTC 2011
> root at obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
> WARNING: WITNESS option enabled, expect reduced performance.
> CPU: AMD Athlon(tm) Processor (1210.81-MHz 686-class CPU)
> Origin = "AuthenticAMD" Id = 0x642 Family = 6 Model = 4 Stepping = 2
> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
> real memory = 1342177280 (1280 MB)
> avail memory = 1291169792 (1231 MB)
> kbd1 at kbdmux0
> acpi0: <ASUS A7V-133> on motherboard
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 4ff00000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> on hostb0
> agp0: aperture size is 32M
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem
> 0xe0000000-0xe3ffffff,0xd7000000-0xd700ffff irq 11 at device 0.0 on
> pci1
> vgapci1: <VGA-compatible display> mem
> 0xd8000000-0xdbffffff,0xd6800000-0xd680ffff at device 0.1 on pci1
> isab0: <PCI-ISA bridge> at device 4.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <VIA 82C686B UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb800-0xb80f at device 4.1 on
> pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 15 at device
> 4.3 on pci0
> usbus0: <VIA 83C572 USB controller> on uhci0
> pci0: <bridge> at device 4.4 (no driver attached)
> ohci0: <NEC uPD 9210 USB controller> mem 0xd6000000-0xd6000fff irq 15
> at device 9.0 on pci0
> usbus1: <NEC uPD 9210 USB controller> on ohci0
> ohci1: <NEC uPD 9210 USB controller> mem 0xd5800000-0xd5800fff irq 11
> at device 9.1 on pci0
> usbus2: <NEC uPD 9210 USB controller> on ohci1
> ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xd5000000-0xd50000ff
> irq 10 at device 9.2 on pci0
> usbus3: EHCI version 1.0
> usbus3: <NEC uPD 720100 USB 2.0 controller> on ehci0
> atapci1: <VIA 6421 SATA150 controller> port
> 0x9400-0x940f,0x9000-0x900f,0x8800-0x880f,0x8400-0x840f,0x8000-0x801f,0x7800-0x78ff
> irq 12 at device 10.0 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> ata4: <ATA channel 2> on atapci1
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x7400-0x743f mem
> 0xd4800000-0xd4800fff,0xd4000000-0xd40fffff irq 10 at device 11.0 on
> pci0
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
> fxp0: Ethernet address: 00:04:ac:d3:7e:2f
> ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x7000-0x70ff mem
> 0xd3800000-0xd3800fff irq 15 at device 13.0 on pci0
> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
> atapci2: <Promise PDC20265 UDMA100 controller> port
> 0x6800-0x6807,0x6400-0x6403,0x6000-0x6007,0x5800-0x5803,0x5400-0x543f
> mem 0xd3000000-0xd301ffff irq 10 at device 17.0 on pci0
> ata5: <ATA channel 0> on atapci2
> ata6: <ATA channel 1> on atapci2
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart0: console (9600,n,8,1)
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xd0000-0xd1fff,0xd4000-0xd47ff pnpid
> ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x100>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: parallel port not found.
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 480Mbps High Speed USB v2.0
> ugen0.1: <VIA> at usbus0
> uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <NEC> at usbus1
> uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <NEC> at usbus2
> uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <NEC> at usbus3
> uhub3: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> onuhub3:
> 5 ports with 5 removable, self powered
> ada0 at ata5 bus 0 scbus6 target 0 lun 0
> ada0: <Maxtor 4G120J6 GAK819K0> ATA-6 device
> ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
> ada0: 117246MB (240121728 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad10
> Timecounter "TSC" frequency 1210807637 Hz quality 800
> cd0 at ata0 bus 0 scbus0 target 0 lun 0
> cd0: <MATSHITA CD-ROM CR-583 AS10> Removable CD-ROM SCSI-0 device
> cd0: 11.100MB/s transfers (PIO3, ATAPI 12bytes, PIO 65534bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> WARNING: WITNESS option enabled, expect reduced performance.
> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> Setting hostuuid: 4f8e039c-bd4b-11e0-b710-0004acd37e2f.
> Setting hostid: 0x4d98cc76.
> Entropy harvesting: interrupts ethernet point_to_point kickstart.
> Starting file system checks:
> /dev/ada0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS
> /dev/ada0p2: clean, 28071737 free (529 frags, 3508901 blocks, 0.0%
> fragmentation)
> Mounting local file systems:.
> Setting hostname: kleenex.
> fxp0: link state changed to DOWN
> Starting Network: lo0 fxp0.
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> options=3<RXCSUM,TXCSUM>
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
> inet 127.0.0.1 netmask 0xff000000
> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> options=9<RXCSUM,VLAN_MTU>
> ether 00:04:ac:d3:7e:2f
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: Ethernet autoselect (none)
> status: no carrier
> Starting devd.
> Starting Network: usbus0.
> Starting Network: usbus1.
> Starting Network: usbus2.
> Starting Network: usbus3.
> fxp0: link state changed to UP
> fxp0: link state changed to DOWN
> DHCPREQUEST on fxp0 to 255.255.255.255 port 67
> fxp0: link state changed to UP
> DHCPREQUEST on fxp0 to 255.255.2fxp0: link state changed to DOWN
> 55.255 port 67
> DHCPACK from 192.168.1.137
> bound to 192.168.1.81 -- renewal in 14400 seconds.
> add net ::ffff:0.0.0.0: gateway ::1
> add net ::0.0.0.0: gateway ::1
> add net fe80::: gateway ::1
> add net ff02::: gateway ::1
> fxp0: link state changed to UP
> Creating and/or trimming log files.
> Starting syslogd.
> No core dumps found.
> ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
> a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
> Clearing /tmp (X related).
> Recovering vi editor sessions:.
> Updating motd:.
> Starting ntpd.
> Starting powerd.
> Configuring syscons: keymap blanktime.
> Starting sshd.
> Starting cron.
> Starting background file system checks in 60 seconds.
>
> Thu Aug 4 21:27:38 IST 2011
>
> FreeBSD/i386 (kleenex) (ttyu0)
>
> login: root
> Password:
> Aug 4 21:27:42 kleenex login: ROOT LOGIN (root) ON ttyu0
> Last login: Thu Aug 4 21:21:41 on ttyu0
> FreeBSD 9.0-BETA1 (GENERIC) #0: Thu Jul 28 16:34:16 UTC 2011
>
> Welcome to FreeBSD!
>
> Before seeking technical support, please use the following resources:
>
> o Security advisories and updated errata information for all releases are
> at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
> for your release first as it's updated frequently.
>
> o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
> along with the mailing lists, can be searched by going to
> http://www.FreeBSD.org/search/. If the doc distribution has
> been installed, they're also available formatted in /usr/share/doc.
>
> If you still have a question or problem, please take the output of
> `uname -a', along with any relevant error messages, and email it
> as a question to the questions at FreeBSD.org mailing list. If you are
> unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
> manual page. If you are not familiar with manual pages, type `man man'.
>
> Edit /etc/motd to change this login announcement.
>
> You have new mail.
> kleenex# uname -a
> FreeBSD kleenex 9.0-BETA1 FreeBSD 9.0-BETA1 #0: Thu Jul 28 16:34:16
> UTC 2011 root at obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> i386
> kleenex# reboot
> Aug 4 21:27:46 kleenex reboot: rebooted by root
> Aug 4 21:27:46 kleenex syslogd: exiting on signal 15
> Waiting (max 60 seconds) for system process `vnlru' to stop...done
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
> Waiting (max 60 seconds) for system process `syncer' to stop...
> Syncing disks, vnodes remaining...2 0 0 done
> All buffers synced.
> lock order reversal:
> 1st 0xc50979e8 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1194
> 2nd 0xc5097e28 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2134
> KDB: stack backtrace:
> db_trace_self_wrapper(c0ef3bfa,75735f73,632e7262,3331323a,ee000a34,...)
> at db_trace_self_wrapper+0x26
> kdb_backtrace(c0a3d38b,c0ef7543,c4d3ebe8,c4d3eb18,ece479bc,...) at
> kdb_backtrace+0x2a
> _witness_debugger(c0ef7543,c5097e28,c0ede88b,c4d3eb18,c0eff221,...) at
> _witness_debugger+0x25
> witness_checkorder(c5097e28,9,c0eff221,856,0,...) at witness_checkorder+0x839
> __lockmgr_args(c5097e28,80500,c5097e48,0,0,...) atstray irq7
> __lockmgr_args+0x804
> vop_stdlock(ece47adc,c0a4ebbb,c0edebb7,80500,c5097dd0,...) at vop_stdlock+0x62
> VOP_LOCK1_APV(c1012d00,ece47adc,c53580b0,c104d720,c5097dd0,...) at
> VOP_LOCK1_APV+0xb5
> _vn_lock(c5097dd0,80500,c0eff221,856,8,...) at _vn_lock+0x5e
> vget(c5097dd0,80500,c5358000,197,c5358000,...) at vget+0xb9
> devfs_allocv(c4ee2080,c522f000,80000,ece47b74,d8stray irq7
> 8,...) at devfs_allocv+0x105
> devfs_root(c522f000,80000,ece47bc0,4ef,ece47bf0,...) at devfs_root+0x52
> dounmount(c522f000,80000,c5358000,c4965c2c,0,...) at dounmount+0x421
> vfs_unmountall(c0eefb51,0,c0eefa9f,131,c5358000,...) at vfs_unmountall+0x4e
> kern_reboot(0,0,c0eefa9f,b2,c5450b00,...) at kern_reboot+0x450
> reboot(c5358000,ece47cec,ece47d80,ece47c88,0,...) at reboot+0x6c
> syscallenter(c5358000,ece47ce4,c0d34586,3,c1096ac0,...) at syscallenter+0x263
> syscall(ece47d28) at syscall+0x34
> Xint0x80_syscall() at Xint0x80_syscall+0x21
> --- syscall (55, FreeBSD ELF32, reboot), eip = 0x280b8f4b, esp =
> 0xbfbfeb5c, ebp = 0xbfbfeca8 ---
> Uptime: 1m10s
> Rebooting...
>
>
--
Andriy Gapon
More information about the freebsd-current
mailing list