panic on reboot w. 9.0-BETA1
kirk russell
kirk at ba23.org
Thu Aug 4 21:02:18 UTC 2011
I tried out the i386 9 Beta this week. I get a panic when I reboot.
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-BETA1 #0: Thu Jul 28 16:34:16 UTC 2011
root at obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
WARNING: WITNESS option enabled, expect reduced performance.
CPU: AMD Athlon(tm) Processor (1210.81-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Family = 6 Model = 4 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
real memory = 1342177280 (1280 MB)
avail memory = 1291169792 (1231 MB)
kbd1 at kbdmux0
acpi0: <ASUS A7V-133> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 4ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> on hostb0
agp0: aperture size is 32M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem
0xe0000000-0xe3ffffff,0xd7000000-0xd700ffff irq 11 at device 0.0 on
pci1
vgapci1: <VGA-compatible display> mem
0xd8000000-0xdbffffff,0xd6800000-0xd680ffff at device 0.1 on pci1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb800-0xb80f at device 4.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 15 at device
4.3 on pci0
usbus0: <VIA 83C572 USB controller> on uhci0
pci0: <bridge> at device 4.4 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xd6000000-0xd6000fff irq 15
at device 9.0 on pci0
usbus1: <NEC uPD 9210 USB controller> on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0xd5800000-0xd5800fff irq 11
at device 9.1 on pci0
usbus2: <NEC uPD 9210 USB controller> on ohci1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xd5000000-0xd50000ff
irq 10 at device 9.2 on pci0
usbus3: EHCI version 1.0
usbus3: <NEC uPD 720100 USB 2.0 controller> on ehci0
atapci1: <VIA 6421 SATA150 controller> port
0x9400-0x940f,0x9000-0x900f,0x8800-0x880f,0x8400-0x840f,0x8000-0x801f,0x7800-0x78ff
irq 12 at device 10.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x7400-0x743f mem
0xd4800000-0xd4800fff,0xd4000000-0xd40fffff irq 10 at device 11.0 on
pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: 00:04:ac:d3:7e:2f
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x7000-0x70ff mem
0xd3800000-0xd3800fff irq 15 at device 13.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
atapci2: <Promise PDC20265 UDMA100 controller> port
0x6800-0x6807,0x6400-0x6403,0x6000-0x6007,0x5800-0x5803,0x5400-0x543f
mem 0xd3000000-0xd301ffff irq 10 at device 17.0 on pci0
ata5: <ATA channel 0> on atapci2
ata6: <ATA channel 1> on atapci2
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd1fff,0xd4000-0xd47ff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
acpi_throttle0: <ACPI CPU Throttling> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <NEC> at usbus2
uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <NEC> at usbus3
uhub3: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> onuhub3:
5 ports with 5 removable, self powered
ada0 at ata5 bus 0 scbus6 target 0 lun 0
ada0: <Maxtor 4G120J6 GAK819K0> ATA-6 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 117246MB (240121728 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad10
Timecounter "TSC" frequency 1210807637 Hz quality 800
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA CD-ROM CR-583 AS10> Removable CD-ROM SCSI-0 device
cd0: 11.100MB/s transfers (PIO3, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ada0p2 [rw]...
Setting hostuuid: 4f8e039c-bd4b-11e0-b710-0004acd37e2f.
Setting hostid: 0x4d98cc76.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/ada0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0p2: clean, 28071737 free (529 frags, 3508901 blocks, 0.0%
fragmentation)
Mounting local file systems:.
Setting hostname: kleenex.
fxp0: link state changed to DOWN
Starting Network: lo0 fxp0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=9<RXCSUM,VLAN_MTU>
ether 00:04:ac:d3:7e:2f
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting devd.
Starting Network: usbus0.
Starting Network: usbus1.
Starting Network: usbus2.
Starting Network: usbus3.
fxp0: link state changed to UP
fxp0: link state changed to DOWN
DHCPREQUEST on fxp0 to 255.255.255.255 port 67
fxp0: link state changed to UP
DHCPREQUEST on fxp0 to 255.255.2fxp0: link state changed to DOWN
55.255 port 67
DHCPACK from 192.168.1.137
bound to 192.168.1.81 -- renewal in 14400 seconds.
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
fxp0: link state changed to UP
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Clearing /tmp (X related).
Recovering vi editor sessions:.
Updating motd:.
Starting ntpd.
Starting powerd.
Configuring syscons: keymap blanktime.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Thu Aug 4 21:27:38 IST 2011
FreeBSD/i386 (kleenex) (ttyu0)
login: root
Password:
Aug 4 21:27:42 kleenex login: ROOT LOGIN (root) ON ttyu0
Last login: Thu Aug 4 21:21:41 on ttyu0
FreeBSD 9.0-BETA1 (GENERIC) #0: Thu Jul 28 16:34:16 UTC 2011
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o Security advisories and updated errata information for all releases are
at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
for your release first as it's updated frequently.
o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
along with the mailing lists, can be searched by going to
http://www.FreeBSD.org/search/. If the doc distribution has
been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions at FreeBSD.org mailing list. If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page. If you are not familiar with manual pages, type `man man'.
Edit /etc/motd to change this login announcement.
You have new mail.
kleenex# uname -a
FreeBSD kleenex 9.0-BETA1 FreeBSD 9.0-BETA1 #0: Thu Jul 28 16:34:16
UTC 2011 root at obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
i386
kleenex# reboot
Aug 4 21:27:46 kleenex reboot: rebooted by root
Aug 4 21:27:46 kleenex syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 0 0 done
All buffers synced.
lock order reversal:
1st 0xc50979e8 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1194
2nd 0xc5097e28 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2134
KDB: stack backtrace:
db_trace_self_wrapper(c0ef3bfa,75735f73,632e7262,3331323a,ee000a34,...)
at db_trace_self_wrapper+0x26
kdb_backtrace(c0a3d38b,c0ef7543,c4d3ebe8,c4d3eb18,ece479bc,...) at
kdb_backtrace+0x2a
_witness_debugger(c0ef7543,c5097e28,c0ede88b,c4d3eb18,c0eff221,...) at
_witness_debugger+0x25
witness_checkorder(c5097e28,9,c0eff221,856,0,...) at witness_checkorder+0x839
__lockmgr_args(c5097e28,80500,c5097e48,0,0,...) atstray irq7
__lockmgr_args+0x804
vop_stdlock(ece47adc,c0a4ebbb,c0edebb7,80500,c5097dd0,...) at vop_stdlock+0x62
VOP_LOCK1_APV(c1012d00,ece47adc,c53580b0,c104d720,c5097dd0,...) at
VOP_LOCK1_APV+0xb5
_vn_lock(c5097dd0,80500,c0eff221,856,8,...) at _vn_lock+0x5e
vget(c5097dd0,80500,c5358000,197,c5358000,...) at vget+0xb9
devfs_allocv(c4ee2080,c522f000,80000,ece47b74,d8stray irq7
8,...) at devfs_allocv+0x105
devfs_root(c522f000,80000,ece47bc0,4ef,ece47bf0,...) at devfs_root+0x52
dounmount(c522f000,80000,c5358000,c4965c2c,0,...) at dounmount+0x421
vfs_unmountall(c0eefb51,0,c0eefa9f,131,c5358000,...) at vfs_unmountall+0x4e
kern_reboot(0,0,c0eefa9f,b2,c5450b00,...) at kern_reboot+0x450
reboot(c5358000,ece47cec,ece47d80,ece47c88,0,...) at reboot+0x6c
syscallenter(c5358000,ece47ce4,c0d34586,3,c1096ac0,...) at syscallenter+0x263
syscall(ece47d28) at syscall+0x34
Xint0x80_syscall() at Xint0x80_syscall+0x21
--- syscall (55, FreeBSD ELF32, reboot), eip = 0x280b8f4b, esp =
0xbfbfeb5c, ebp = 0xbfbfeca8 ---
Uptime: 1m10s
Rebooting...
--
Kirk Russell <kirk at ba23.org> http://www.ba23.org/
More information about the freebsd-current
mailing list