ZFS boot problems with memory > 1MB
mad at madpilot.net
Fri Apr 9 13:15:42 UTC 2010
On Fri, Apr 09, 2010 at 08:39:58AM -0400, John Baldwin wrote:
> On Friday 09 April 2010 7:01:23 am Guido Falsi wrote:
> > On Wed, Feb 24, 2010 at 09:55:27AM -0500, John Baldwin wrote:
> > Hi!
> > I'm seeing a very similar (perhaps the same) problem on a server I'm
> > trying to configure.
> > Is there any news about this issue?
> > This server is an HP DL360G6 server. Unluckily it has a smartarray thing
> > on it, the disk are behind it.
> > I wanted to configure a 6 drive raidz2 with the driver
> > present(configured as stand alone raid0 units, this is as near you can
> > go to have the smartarray give direct access to the drive to the
> > system, I know this is not optimal.)
> > After following the RootOnZFS instructions after boot the system gives
> > me the same symptoms the parent gets. Old gptzfsboot is not an option
> > here. It fails to malloc. I imagine 128K heap is not enough for my
> > setup.
> > I tried adding some more printfs but it outputs really a lot of data.
> > especially from drive_probe(). I see it cycling through the drives and
> > reading various addresses, what surprises me is it gets very high LBA
> > numbers. For example the last try(which remains on screen) looks like
> > this:
> > packet.len = 16
> > packet.count = 16
> > packet.off = 0
> > packet.seg = 8192
> > packet.lba = 1716867670
> > dsk->drive = 133
> > dsk->type = 0
> > dsk->unit = 5
> > dsk->slice = 0
> > dsk->part = 0
> > dsk->init = 0
> > dsk->start = 1716867430
> > Hope this information helps.
> What error code are you seeing, 1?
Yes, exactly 1. With LBAs 1 or 32 reported in the error code(not the
additional printfs I added).
The error appears 8 times. Which is strange since the system has 6
disks, but 8 bays.
Guido Falsi <mad at madpilot.net>
More information about the freebsd-current