Call for testers: re(4) and
RTL8168C/RTL8168CP/RTL8111C/RTL8111CP
Dimitry Andric
dimitry at andric.com
Tue Jun 10 14:45:13 UTC 2008
On 2008-06-10 07:05, Pyun YongHyeon wrote:
> > rgephy0 pnpinfo oui=0x732 model=0x11 rev=0x2 at phyno=1
> > rgephy1 pnpinfo oui=0x732 model=0x11 rev=0x2 at phyno=1
>
> The PHY model number is 0x02 which doesn't have advanced link power
> saving feature so I guess the issue is not related with PHY.
>
> Would you try updated patch?
> http://people.freebsd.org/~yongari/re/re.HEAD.20080610
This seems to work better, although it still takes quite some time
(~10s) for the interfaces to go up at boot time. I haven't yet been
able to get them "stuck", however, so that's good. :)
dmesg didn't change:
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfdfff000-0xfdfff0ff irq 18 at device 9.0 on pci0
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:30:18:a6:f1:a8
re0: [FILTER]
re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf200-0xf2ff mem 0xfdffe000-0xfdffe0ff irq 19 at device 11.0 on pci0
re1: Chip rev. 0x18000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: Ethernet address: 00:30:18:a6:f1:a9
re1: [FILTER]
devinfo:
re0 pnpinfo vendor=0x10ec device=0x8167 subvendor=0x16f3 subdevice=0x10ec class=0x020000 at slot=9 function=0
Interrupt request lines:
18
I/O ports:
0xf000-0xf0ff
I/O memory addresses:
0xfdfff000-0xfdfff0ff
miibus0
rgephy0 pnpinfo oui=0x732 model=0x11 rev=0x2 at phyno=1
re1 pnpinfo vendor=0x10ec device=0x8167 subvendor=0x16f3 subdevice=0x10ec class=0x020000 at slot=11 function=0
Interrupt request lines:
19
I/O ports:
0xf200-0xf2ff
I/O memory addresses:
0xfdffe000-0xfdffe0ff
miibus1
rgephy1 pnpinfo oui=0x732 model=0x11 rev=0x2 at phyno=1
More information about the freebsd-current
mailing list