Call for testers: re(4) and
RTL8168C/RTL8168CP/RTL8111C/RTL8111CP
Kevin Lo
kevlo at kevlo.org
Tue Jun 10 08:27:29 UTC 2008
Pyun YongHyeon wrote:
> On Mon, Jun 09, 2008 at 02:45:00PM +0200, Dimitry Andric wrote:
> > On 2008-06-09 14:32, Pyun YongHyeon wrote:
> > > > > > > http://people.freebsd.org/~yongari/re/re.HEAD.20080607
> > > > > > With this patch, all my re's stop working. :( No packets go in, no
> > > > > Would you show me re(4) related part of dmesg output?
> > > Would you show me the output of "devinfo -rv | grep oui"?
> >
> > That gives:
> >
> > rgephy0 pnpinfo oui=0x732 model=0x11 rev=0x2 at phyno=1
> > rgephy1 pnpinfo oui=0x732 model=0x11 rev=0x2 at phyno=1
>
> The PHY model number is 0x02 which doesn't have advanced link power
> saving feature so I guess the issue is not related with PHY.
>
> Would you try updated patch?
> http://people.freebsd.org/~yongari/re/re.HEAD.20080610
Hi Pyun,
It works well on -current:
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet>
port 0xe800-0xe8ff mem 0xfbfffc00-0xfbfffcff irq 20 at device 12.0 on
pci1
re0: Chip rev. 0x10000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
re0: Ethernet address: 00:0d:5e:3a:02:0c
re0: [FILTER]
$ ifconfig re0
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=399b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 00:0d:5e:3a:02:0c
inet 172.16.113.135 netmask 0xfffff000 broadcast 172.16.127.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Regards,
Kevin.
More information about the freebsd-current
mailing list