SATA disks no longer showing up after updating CURRENT last
night
Pascal Hofstee
caelian at gmail.com
Thu Aug 28 20:02:41 UTC 2008
On Thu, Aug 28, 2008 at 9:10 AM, Andrey V. Elsukov <bu7cher at yandex.ru> wrote:
> Pascal Hofstee wrote:
>>
>> Somebody out there has any idea why the SATA Controller on atapci2 no
>> longer seems
>> to be probed and therefore my disks no longer show up ?
>
> Can you show your /var/run/dmesg.boot after verbose boot?
Luckily the dmesg kernel buffer was kind enough to keep the content of
the previous boot as well the current boot so i was able to salvage
the verbose boot output from the problem kernel.
Copyright (c) 1993-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #22: Thu Aug 28 00:12:28 CEST 2008
pascal at trinity.zion:/usr/obj/usr/src/sys/TRINITY
Preloaded elf kernel "/boot/kernel.broken/kernel" at 0xffffffff812c7000.
Preloaded elf obj module "/boot/kernel.broken/zfs.ko" at 0xffffffff812c71d8.
Preloaded elf obj module "/boot/kernel.broken/opensolaris.ko" at
0xffffffff812c7888.
Preloaded elf obj module "/boot/kernel.broken/dtrace.ko" at 0xffffffff812c7ec0.
Preloaded elf obj module "/boot/kernel.broken/cyclic.ko" at 0xffffffff812c8570.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2400017545 Hz
CPU: AMD Athlon(tm) 64 Processor 3800+ (2400.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 2128044032 (2029 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x00000000012f5000 - 0x000000007c770fff, 2068299776 bytes (504956 pages)
avail memory = 2053513216 (1958 MB)
ACPI APIC Table: <090607 APIC1001>
APIC: CPU 0 has ACPI ID 1
ULE: setup cpu 0
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
ACPI: RSDP @ 0x0xf9be0/0x0014 (v 0 ACPIAM)
ACPI: RSDT @ 0x0x7ffd0000/0x003C (v 1 090607 RSDT1001 0x20070906 MSFT
0x00000097)
ACPI: FACP @ 0x0x7ffd0200/0x0084 (v 1 090607 FACP1001 0x20070906 MSFT
0x00000097)
ACPI: DSDT @ 0x0x7ffd0440/0x4F7A (v 1 1ADGH 1ADGH000 0x00000000 INTL
0x20051117)
ACPI: FACS @ 0x0x7ffde000/0x0040
ACPI: APIC @ 0x0x7ffd0390/0x0070 (v 1 090607 APIC1001 0x20070906 MSFT
0x00000097)
ACPI: MCFG @ 0x0x7ffd0400/0x003C (v 1 090607 OEMMCFG 0x20070906 MSFT
0x00000097)
ACPI: OEMB @ 0x0x7ffde040/0x0071 (v 1 090607 OEMB1001 0x20070906 MSFT
0x00000097)
ACPI: HPET @ 0x0x7ffd53c0/0x0038 (v 1 090607 OEMHPET0 0x20070906 MSFT
0x00000097)
ACPI: SSDT @ 0x0x7ffd5400/0x0136 (v 1 A M I POWERNOW 0x00000001 AMD
0x00000001)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00000400
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
kbd: new array size 4
kbd1 at kbdmux0
nfslock: pseudo-device
mem: <memory>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Aug 28 2008 00:12:21)
acpi0: <090607 RSDT1001> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIMC -> bus 0 dev 1 func 0
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x0369, revid=0xa1
domain=0, bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0363, revid=0xa2
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x2f00, size 7, enabled
found-> vendor=0x10de, dev=0x0368, revid=0xa2
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x2900, size 6, enabled
map[20]: type I/O Port, range 32, base 0x2d00, size 6, enabled
map[24]: type I/O Port, range 32, base 0x2e00, size 6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0)
pci_link13: Picked IRQ 20 with weight 0
pcib0: slot 1 INTA routed to irq 20 via \\_SB_.LSMB
found-> vendor=0x10de, dev=0x036c, revid=0xa1
domain=0, bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfbffb000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0)
pci_link8: Picked IRQ 21 with weight 0
pcib0: slot 2 INTA routed to irq 21 via \\_SB_.LUB0
found-> vendor=0x10de, dev=0x036d, revid=0xa2
domain=0, bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfbffac00, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0)
pci_link10: Picked IRQ 22 with weight 0
pcib0: slot 2 INTB routed to irq 22 via \\_SB_.LUB2
found-> vendor=0x10de, dev=0x036e, revid=0xa1
domain=0, bus=0, slot=4, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
found-> vendor=0x10de, dev=0x037f, revid=0xa2
domain=0, bus=0, slot=5, func=0
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xe400, size 3, enabled
map[14]: type I/O Port, range 32, base 0xe080, size 2, enabled
map[18]: type I/O Port, range 32, base 0xe000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xdc00, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd880, size 4, enabled
map[24]: type Memory, range 32, base 0xfbff9000, size 12, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.LSA0:0)
pci_link15: Picked IRQ 23 with weight 0
pcib0: slot 5 INTA routed to irq 23 via \\_SB_.LSA0
found-> vendor=0x10de, dev=0x037f, revid=0xa2
domain=0, bus=0, slot=5, func=1
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xd800, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd480, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd400, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xd080, size 2, enabled
map[20]: type I/O Port, range 32, base 0xd000, size 4, enabled
map[24]: type Memory, range 32, base 0xfbff8000, size 12, enabled
pcib0: matched entry for 0.5.INTB (src \\_SB_.LSA1:0)
pci_link16: Picked IRQ 20 with weight 1
pcib0: slot 5 INTB routed to irq 20 via \\_SB_.LSA1
found-> vendor=0x10de, dev=0x0370, revid=0xa2
domain=0, bus=0, slot=6, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0004, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0371, revid=0xa2
domain=0, bus=0, slot=6, func=1
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
map[10]: type Memory, range 32, base 0xfbff4000, size 14, enabled
pcib0: matched entry for 0.6.INTB (src \\_SB_.LAZA:0)
pci_link12: Picked IRQ 21 with weight 1
pcib0: slot 6 INTB routed to irq 21 via \\_SB_.LAZA
found-> vendor=0x10de, dev=0x0373, revid=0xa2
domain=0, bus=0, slot=8, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 8 messages, 64 bit, vector masks
MSI-X supports 8 messages in maps 0x18 and 0x1c
map[10]: type Memory, range 32, base 0xfbff3000, size 12, enabled
map[14]: type I/O Port, range 32, base 0xcc00, size 3, enabled
map[18]: type Memory, range 32, base 0xfbffa800, size 8, enabled
map[1c]: type Memory, range 32, base 0xfbffa400, size 4, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.LMAC:0)
pci_link11: Picked IRQ 22 with weight 1
pcib0: slot 8 INTA routed to irq 22 via \\_SB_.LMAC
found-> vendor=0x10de, dev=0x0374, revid=0xa2
domain=0, bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa2
domain=0, bus=0, slot=12, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0378, revid=0xa2
domain=0, bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0375, revid=0xa2
domain=0, bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0377, revid=0xa2
domain=0, bus=0, slot=15, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfbffb000-0xfbffbfff irq
21 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfbffb000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbffac00-0xfbffacff
irq 22 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfbffac00
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
umass0: <Maxtor Corporation Maxtor 3200, class 0/0, rev 2.00/0.01,
addr 2> on uhub1
umass0:0:0:-1: Attached to scbus0
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0xe400-0xe407,0xe080-0xe083,0xe000-0xe007,0xdc00-0xdc03,0xd880-0xd88f
mem 0xfbff9000-0xfbff9fff irq 23 at device 5.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd880
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfbff9000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe400
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe080
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe000
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xdc00
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0xd800-0xd807,0xd480-0xd483,0xd400-0xd407,0xd080-0xd083,0xd000-0xd00f
mem 0xfbff8000-0xfbff8fff irq 20 at device 5.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfbff8000
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd480
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd400
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd080
ata5: SATA connect status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pci0: <multimedia> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xcc00-0xcc07 mem
0xfbff3000-0xfbff3fff,0xfbffa800-0xfbffa8ff,0xfbffa400-0xfbffa40f irq
22 at device 8.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfbff3000
nfe0: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfbffa800
nfe0: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfbffa400
nfe0: attempting to allocate 8 MSI-X vectors (8 supported)
msi: routing MSI-X IRQ 256 to vector 55
msi: routing MSI-X IRQ 257 to vector 56
msi: routing MSI-X IRQ 258 to vector 57
msi: routing MSI-X IRQ 259 to vector 58
msi: routing MSI-X IRQ 260 to vector 59
msi: routing MSI-X IRQ 261 to vector 60
msi: routing MSI-X IRQ 262 to vector 61
msi: routing MSI-X IRQ 263 to vector 62
nfe0: using IRQs 256-263 for MSI-X
nfe0: Using 8 MSIX messages
miibus0: <MII bus> on nfe0
ciphy0: <Vitesse VSC8601 10/100/1000TX PHY> PHY 1 on miibus0
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:16:17:96:44:91
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x0-0x0
pcib5: no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xfc000000-0xfebfffff
pcib6: prefetched decode 0xd0000000-0xdfffffff
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
found-> vendor=0x10de, dev=0x01df, revid=0xa1
domain=0, bus=6, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
pcib6: requested memory range 0xfd000000-0xfdffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib6: requested memory range 0xd0000000-0xdfffffff: good
map[1c]: type Memory, range 64, base 0xfc000000, size 24, enabled
pcib6: requested memory range 0xfc000000-0xfcffffff: good
pcib6: matched entry for 6.0.INTA (src \\_SB_.LNEB:0)
pci_link5: Picked IRQ 16 with weight 0
pcib6: slot 0 INTA routed to irq 16 via \\_SB_.LNEB
vgapci0: <VGA-compatible display> mem
0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq
16 at device 0.0 on pci6
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 63
uart0: [FILTER]
uart0: fast interrupt
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 64
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
uart: uart0 already exists; skipping it
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 65
uart1: [FILTER]
uart1: fast interrupt
uart2: not probed (disabled)
uart3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ums0: <Logitech Trackball, class 0/0, rev 1.10/2.20, addr 2> on uhub0
ums0: 3 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 132441 -> 100000
procfs registered
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
lapic: Divisor 2, Frequency 100000734 hz
Timecounter "TSC" frequency 2400017545 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: identify ch->devices=00010000
ZFS filesystem version 11
ZFS storage pool version 11
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
acd0: setting PIO4 on nForce MCP55 chip
acd0: setting UDMA66 on nForce MCP55 chip
acd0: <HL-DT-ST DVDRAM GSA-H42L/SL01> DVDR drive at ata0 as master
acd0: read 8268KB/s (8268KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: identify ch->devices=00000000
ata2: identify ch->devices=00000001
ata2: reiniting channel ..
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=58 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: reinit done ..
ata2: reiniting channel ..
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=58 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: reinit done ..
ata3: identify ch->devices=00000001
ata3: reiniting channel ..
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=58 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: reinit done ..
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Maxtor 3200 0344> Fixed Direct Access SCSI-4 device
pass0: Serial Number UA07ZR7C
pass0: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Maxtor 3200 0344> Fixed Direct Access SCSI-4 device
da0: Serial Number UA07ZR7C
da0: 40.000MB/s transfers
da0: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C)
GEOM_LABEL: Label for provider da0s1 is ntfs/DataStorage.
ata3: reiniting channel ..
ata3: SATA connect time=0ms
ata3: reset tp1 mask=01 ostat0=58 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: reinit done ..
ata4: identify ch->devices=00000000
ata5: identify ch->devices=00000000
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad4s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
ntfs/DataStorage da0s1 da0 acd0
The device ntfs/DataStorage equals da0s1 and is an USB attached
datastorage medium.
Missing are the devices ad4 and ad6 which should have shown up
attached to ata2-master and ata3-master,
which to my understanding should have both been children of atapci1.
--
Pascal Hofstee
More information about the freebsd-current
mailing list