FreeBSD corruption problems on barcelona
Jeff Roberson
jroberson at chesapeake.net
Fri Nov 9 19:19:37 PST 2007
I have a report from a Linux developer who has kindly done some
investigation into a problem he's having getting 7.0 beta2 installed due
to what appears to be serious corruption on writes. Please read on for
details.
---------- Forwarded message ----------
Date: Sat, 10 Nov 2007 09:31:31 +1100
From: Nick Piggin <nickpiggin at yahoo.com.au>
To: Jeff Roberson <jroberson at chesapeake.net>
Subject: Re: Installing FreeBSD 7
On Saturday 10 November 2007 06:37, Jeff Roberson wrote:
> On Sat, 10 Nov 2007, Nick Piggin wrote:
>> Hi Jeff,
>>
>> Your recent blog posts and other tests with FreeBSD 7 performance
>> has me very interested in it :) Anyway I had intended to install it
>> when I got a new test box running, and now is that time.
>>
>> I have installed FreeBSD 4.something long ago, but haven't had the
>> time to look at it since then. You probably don't have the time to
>> answer newbie questions either but if I may just quickly run the
>> problem past you... (feel free to redirect me)
>>
>> I have 7.0-BETA2-amd64-disk1.iso and installing from CD. This seems
>> to be the easy/preferred way to go? No special trick to it -- just
>> follow the standard install?
>
> Yes, it's pretty much the only way to go unless you want to do a scripted
> install. yes, we know it's terrible.
OK, thanks. I wasn't going to criticise it ;)... it's a little bit
clunky in places. OTOH I much prefer a nice text based installer to
most of the graphical ones.
>> The problem I have is that the install seem quite flakey and has
>> random problems. One install will complain it can't mount root, the
>> next reinstall will stop before the kernel console comes up, the
>> next will complain about some problem with various binaries not
>> being valid executables etc.
>>
>> BETA1.5 was slightly better (I actually got to the point I could log
>> in), but it seemed to have similar corruption in random text files as
>> well, so maybe I just got lucky.
>>
>> The install kernel running off the PATA CD seems completely solid. So
>> I think everything points to a SATA driver problem.
>
> That sounds pretty bad. Not a good reflection on us is it? I'll see
> if I can contact the ata driver author and see what he has to say.
Well it is a beta, and it's new hardware; I was prepared to see bugs.
Doesn't seem like many others are having problems, so it might be
something unusual in my configuration.
> For now you could try "set hw.ata.ata_dma=0" "set hw.ata.atapi_dma=0" in
> the boot loader before the install and then again before you boot. Then
> you can put that without the 'set' in /boot/loader.conf. Just interrupt
> the boot as it's counting down with a key press and then type 'boot' after
> you've entered the variables. We used to see random corruption problems
> with pata devices when we tried to do too fast a dma mode. You'd think the
> signaling would be better with sata but it's worth a shot.
That doesn't work either. After installing again, eg. now I have
corruption in lib/libm.so.5 (among other things).
hexdump /lib/libm.so.5 shows the first 0x10000 bytes are zeroes.
> If you could also do a 'boot -v' from the loader once and dump the dmesg
> into a file that'd be very helpful to the ata guy I'm sure.
Here it is attached. Now there is a cdrom error there, however I
don't believe it is the cause of the problem (or at least, there
is a bigger problem with the sata disk). The install has run
perfectly every time I've run it, so it is pulling the data off
the CD OK.
Now I have actually got as far as root login, I filled up a 1MB
file with /dev/urandom and took an md5. Then copied that to 50
files on the /tmp filesystem, unmounted and remounted it, and then
read back the md5 sums. Practially all of them are wrong, but they
seem to be wrong in the same ways (eg. many share the same
incorrect md5 sum). Reading the files back from disk consistently
gives the same information, so it seems like reads are OK.
Interestingly, a second test didn't show up corruption, so I don't
know how reproduceable it is
Hope this helps.
Thanks,
Nick
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA2 #0: Fri Nov 2 14:54:38 UTC 2007
root at myers.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80f7e000.
Preloaded mfs_root "/boot/mfsroot" at 0xffffffff80f7e208.
Calibrating clock(s) ... i8254 clock: 1192946 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1895261780 Hz
CPU: Quad-Core AMD Opteron(tm) Processor 8347 (1895.26-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f21 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,<b23>>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,<b26>,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>>
Cores per package: 4
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 4277063680 (4078 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x000000000107c000 - 0x00000000c6ff9fff, 3321356288 bytes (810878 pages)
0x0000000100000000 - 0x000000012ffeffff, 805240832 bytes (196592 pages)
avail memory = 4115697664 (3925 MB)
ACPI APIC Table: <BRCM Anaheim >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
APIC: CPU 4 has ACPI ID 4
APIC: CPU 5 has ACPI ID 5
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 7
ACPI: RSDP @ 0x0xf8020/0x0024 (v 2 PTLTD )
ACPI: XSDT @ 0x0xcfedbf64/0x0064 (v 1 BRCM Anaheim 0x06040000 PTL 0x02000001)
ACPI: FACP @ 0x0xcfedc03c/0x00F4 (v 3 BRCM EXPLOSN 0x06040000 MSFT 0x02000001)
ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 0/C [20070320]
ACPI: DSDT @ 0x0xcfedc130/0x4777 (v 2 AMD Anaheim 0x06040000 MSFT 0x02000002)
ACPI: FACS @ 0x0xcfeedfc0/0x0040
ACPI: TCPA @ 0x0xcfee08a7/0x0032 (v 1 BRCM Anaheim 0x06040000 PTL 0x20000001)
ACPI: SRAT @ 0x0xcfee08d9/0x0150 (v 1 AMD HAMMER 0x06040000 AMD 0x00000001)
ACPI: SSDT @ 0x0xcfee0a29/0x143C (v 1 AMD POWERNOW 0x06040000 AMD 0x00000001)
ACPI: HPET @ 0x0xcfee1e65/0x0038 (v 1 BRCM Anaheim 0x06040000 BRCM 0x02000001)
ACPI: SSDT @ 0x0xcfee1e9d/0x0049 (v 1 BRCM PRT0 0x06040000 BRCM 0x02000001)
ACPI: SPCR @ 0x0xcfee1ee6/0x0050 (v 1 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001)
ACPI: APIC @ 0x0xcfee1f36/0x00CA (v 1 BRCM Anaheim 0x06040000 PTL 0x02000001)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 10, Interrupt 32 at 0xfec02000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: edge
lapic4: LINT1 polarity: high
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: edge
lapic5: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Nov 2 2007 14:52:52)
acpi0: <BRCM Anaheim> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
pci_open(1): mode 1 addr port (0x0cf8) is 0x8008211c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 1 [class=060400] [hdr=01] is there (id=00361166)
AcpiOsDerivePciId: \\_SB_.PCI0.EXB0.MCF0 -> bus 0 dev 6 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.PCIR.CNFG -> bus 0 dev 24 func 1
unknown: I/O range not supported
ACPI timer: 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 10 11
Validation 0 10 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 5 7 11
Validation 0 7 N 0 5 7 11
After Disable 0 255 N 0 5 7 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 11 12 14 15
Validation 0 11 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 7 11 12 14 15
Validation 0 5 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 11 12 14 15
Validation 0 11 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link28: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link29: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link30: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 7 11 12 14 15
Validation 0 5 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link31: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link32: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link33: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
pci_link34: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15
Validation 0 255 N 0 3 4 5 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x1166 rev: 0x1 num: 9 hz: 14318180 opts: leg_route count_size
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
ACPI: Found matching pin for 0.3.INTA at func 0: 10
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1166, dev=0x0036, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0205, revid=0x00
domain=0, bus=0, slot=2, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0214, revid=0x00
domain=0, bus=0, slot=2, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0015, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0x4800, size 4, enabled
found-> vendor=0x1166, dev=0x0234, revid=0x00
domain=0, bus=0, slot=2, func=2
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8510000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x4c00, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8511000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x5000, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd8512000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x5400, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1002, dev=0x515e, revid=0x02
domain=0, bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled
map[14]: type I/O Port, range 32, base 0x5800, size 8, enabled
map[18]: type Memory, range 32, base 0xd8500000, size 16, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 43
found-> vendor=0x1166, dev=0x0140, revid=0xa2
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 32
found-> vendor=0x1166, dev=0x0142, revid=0xa2
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 32
found-> vendor=0x1166, dev=0x0144, revid=0xa2
domain=0, bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 32
found-> vendor=0x1166, dev=0x0142, revid=0xa2
domain=0, bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 32
found-> vendor=0x1166, dev=0x0144, revid=0xa2
domain=0, bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 32
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=24, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=25, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 2
pcib1: I/O decode 0x6000-0x6fff
pcib1: memory decode 0xd8300000-0xd83fffff
pcib1: no prefetched decode
ACPI: Found matching pin for 1.14.INTA at func 0: 7
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1166, dev=0x0104, revid=0xc0
domain=0, bus=1, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0017, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x1166, dev=0x024a, revid=0x00
domain=0, bus=1, slot=14, func=0
class=01-04-05, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0x6040, size 3, enabled
pcib1: requested I/O range 0x6040-0x6047: in range
map[14]: type I/O Port, range 32, base 0x6034, size 2, enabled
pcib1: requested I/O range 0x6034-0x6037: in range
map[18]: type I/O Port, range 32, base 0x6038, size 3, enabled
pcib1: requested I/O range 0x6038-0x603f: in range
map[1c]: type I/O Port, range 32, base 0x6030, size 2, enabled
pcib1: requested I/O range 0x6030-0x6033: in range
map[20]: type I/O Port, range 32, base 0x6000, size 5, enabled
pcib1: requested I/O range 0x6000-0x601f: in range
map[24]: type Memory, range 32, base 0xd8300000, size 13, enabled
pcib1: requested memory range 0xd8300000-0xd8301fff: good
pcib1: matched entry for 1.14.INTA (src \\_SB_.LNKS:0)
ioapic0: Changing trigger for pin 7 to level
ioapic0: Changing polarity for pin 7 to low
pcib1: slot 14 INTA routed to irq 7 via \\_SB_.LNKS
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
atapci0: <ServerWorks HT1000 SATA150 controller> port 0x6040-0x6047,0x6034-0x6037,0x6038-0x603f,0x6030-0x6033,0x6000-0x601f mem 0xd8300000-0xd8301fff irq 7 at device 14.0 on pci1
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6000
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xd8300000
ata2: <ATA channel 0> on atapci0
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: reset tp1 mask=01 ostat0=7f ostat1=00
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=00 devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: reset tp1 mask=01 ostat0=7f ostat1=00
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: reset tp2 stat0=ff stat1=00 devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: reset tp1 mask=01 ostat0=7f ostat1=00
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=00 devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4800-0x480f at device 2.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4800
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=02 ostat0=ff ostat1=50
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x8<ATAPI_SLAVE>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0x4c00-0x4cff mem 0xd8510000-0xd8510fff irq 10 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8510000
ohci0: (New OHCI DeviceId=0x02231166)
ioapic0: routing intpin 10 (ISA IRQ 10) to vector 52
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> port 0x5000-0x50ff mem 0xd8511000-0xd8511fff irq 10 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8511000
ohci1: (New OHCI DeviceId=0x02231166)
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> port 0x5400-0x54ff mem 0xd8512000-0xd8512fff irq 10 at device 3.2 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8512000
ehci0: (New EHCI DeviceId=0x02231166)
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <(0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
vgapci0: <VGA-compatible display> port 0x5800-0x58ff mem 0xd0000000-0xd7ffffff,0xd8500000-0xd850ffff irq 43 at device 4.0 on pci0
pcib3: <ACPI PCI-PCI bridge> irq 32 at device 6.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 8.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x7000-0x7fff
pcib6: memory decode 0xd8200000-0xd82fffff
pcib6: no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
found-> vendor=0x1000, dev=0x0056, revid=0x02
domain=0, bus=6, slot=0, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 1 message in map 0x14
map[10]: type I/O Port, range 32, base 0x7000, size 8, enabled
pcib6: requested I/O range 0x7000-0x70ff: in range
map[14]: type Memory, range 64, base 0xd8210000, size 14, enabled
pcib6: requested memory range 0xd8210000-0xd8213fff: good
map[1c]: type Memory, range 64, base 0xd8200000, size 16, enabled
pcib6: requested memory range 0xd8200000-0xd820ffff: good
pcib6: matched entry for 6.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 35
mpt0: <LSILogic SAS/SATA Adapter> port 0x7000-0x70ff mem 0xd8210000-0xd8213fff,0xd8200000-0xd820ffff irq 35 at device 0.0 on pci6
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x7000
mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xd8210000
ioapic2: routing intpin 3 (PCI IRQ 35) to vector 53
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.12.0
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
mpt0: mpt_cam_event: 0x16
mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
pcib7: <ACPI PCI-PCI bridge> irq 32 at device 10.0 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 8
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xd8400000-0xd84fffff
pcib7: no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found-> vendor=0x1166, dev=0x0103, revid=0xb5
domain=0, bus=7, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib8: <PCI-PCI bridge> at device 0.0 on pci7
pcib8: domain 0
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xd8400000-0xd84fffff
pcib8: no prefetched decode
pci8: <PCI bus> on pcib8
pci8: domain=0, physical bus=8
found-> vendor=0x14e4, dev=0x1678, revid=0xa3
domain=0, bus=8, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xd8410000, size 16, enabled
pcib8: requested memory range 0xd8410000-0xd841ffff: good
pcib7: requested memory range 0xd8410000-0xd841ffff: good
map[18]: type Memory, range 64, base 0xd8400000, size 16, enabled
pcib8: requested memory range 0xd8400000-0xd840ffff: good
pcib7: requested memory range 0xd8400000-0xd840ffff: good
pcib7: matched entry for 7.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 36
pcib8: slot 4 INTA is routed to irq 36
found-> vendor=0x14e4, dev=0x1678, revid=0xa3
domain=0, bus=8, slot=4, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xd8430000, size 16, enabled
pcib8: requested memory range 0xd8430000-0xd843ffff: good
pcib7: requested memory range 0xd8430000-0xd843ffff: good
map[18]: type Memory, range 64, base 0xd8420000, size 16, enabled
pcib8: requested memory range 0xd8420000-0xd842ffff: good
pcib7: requested memory range 0xd8420000-0xd842ffff: good
pcib7: matched entry for 7.0.INTB
pcib7: slot 0 INTB hardwired to IRQ 36
pcib8: slot 4 INTB is routed to irq 36
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x9003> mem 0xd8410000-0xd841ffff,0xd8400000-0xd840ffff irq 36 at device 4.0 on pci8
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd8410000
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to vector 56
bge0: using IRQ 256 for MSI
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0034, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:e0:81:80:1d:d6
bge0: [MPSAFE]
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x9003> mem 0xd8430000-0xd843ffff,0xd8420000-0xd842ffff irq 36 at device 4.1 on pci8
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd8430000
bge1: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 257 to vector 64
bge1: using IRQ 257 for MSI
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0034, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:e0:81:80:1d:d7
bge1: [MPSAFE]
bge1: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: failed to reset the aux device.
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
fdc0: <floppy drive controller> port 0-0x5,0 on acpi0
fdc0: cannot reserve interrupt line
device_attach: fdc0 attach returned 6
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
fdc0: <floppy drive controller> port 0-0x5,0 on acpi0
fdc0: cannot reserve interrupt line
device_attach: fdc0 attach returned 6
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xce000-0xce7ff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 238312 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750633 hz
Timecounter "TSC" frequency 1895261780 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80b7c178
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on HT1000 chip
acd0: setting UDMA33 on HT1000 chip
acd0: <DV-28E-R/1.8A> DVDROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 152627MB <Seagate ST3160815AS 3.AAC> at ata2-master SATA150
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 7 to local APIC 2
ioapic0: Assigning ISA IRQ 9 to local APIC 3
ioapic0: Assigning ISA IRQ 10 to local APIC 4
ioapic0: Assigning ISA IRQ 14 to local APIC 5
ioapic0: Assigning ISA IRQ 15 to local APIC 6
ioapic2: Assigning PCI IRQ 35 to local APIC 7
msi: Assigning MSI IRQ 256 to local APIC 0
msi: Assigning MSI IRQ 257 to local APIC 1
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
GEOM: new disk ad4
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
GEOM: Reconfigure ad4s2a, start 0 length 536870912 end 536870911
GEOM: Reconfigure ad4s2b, start 536870912 length 4294967296 end 4831838207
GEOM: Reconfigure ad4s2c, start 0 length 21476206080 end 21476206079
GEOM: Reconfigure ad4s2d, start 4831838208 length 5349834752 end 10181672959
GEOM: Reconfigure ad4s2e, start 10181672960 length 536870912 end 10718543871
GEOM: Reconfigure ad4s2f, start 10718543872 length 10757662208 end 21476206079
GEOM: Reconfigure ad4s2a, start 0 length 536870912 end 536870911
GEOM: Reconfigure ad4s2b, start 536870912 length 4294967296 end 4831838207
GEOM: Reconfigure ad4s2c, start 0 length 21476206080 end 21476206079
GEOM: Reconfigure ad4s2d, start 4831838208 length 5349834752 end 10181672959
GEOM: Reconfigure ad4s2e, start 10181672960 length 536870912 end 10718543871
GEOM: Reconfigure ad4s2f, start 10718543872 length 10757662208 end 21476206079
GEOM: Reconfigure ad4s2a, start 0 length 536870912 end 536870911
GEOM: Reconfigure ad4s2b, start 536870912 length 4294967296 end 4831838207
GEOM: Reconfigure ad4s2c, start 0 length 21476206080 end 21476206079
GEOM: Reconfigure ad4s2d, start 4831838208 length 5349834752 end 10181672959
GEOM: Reconfigure ad4s2e, start 10181672960 length 536870912 end 10718543871
GEOM: Reconfigure ad4s2f, start 10718543872 length 10757662208 end 21476206079
GEOM: Reconfigure ad4s2a, start 0 length 536870912 end 536870911
GEOM: Reconfigure ad4s2b, start 536870912 length 4294967296 end 4831838207
GEOM: Reconfigure ad4s2c, start 0 length 21476206080 end 21476206079
GEOM: Reconfigure ad4s2d, start 4831838208 length 5349834752 end 10181672959
GEOM: Reconfigure ad4s2e, start 10181672960 length 536870912 end 10718543871
GEOM: Reconfigure ad4s2f, start 10718543872 length 10757662208 end 21476206079
bge0: link UP
More information about the freebsd-current
mailing list