[ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set up

Jeremy Chadwick koitsu at FreeBSD.org
Wed Nov 7 00:31:22 PST 2007


On Tue, Nov 06, 2007 at 11:04:24PM -0600, Rusty Nejdl wrote:
> I removed the jumpers per the doc and unfortunately, there was no change:

There was a change -- look at the output from atacontrol again:

> ATA channel 6:
>     Master: ad12 <ST3750640AS/3.AAK> Serial ATA II
>     Slave:       no device present
> ATA channel 8:
>     Master: ad16 <ST3750640AS/3.AAK> Serial ATA II
>     Slave:       no device present

The devices now claim to support SATA300 (or hould.  Scott Long's mail
is also applicable, but in this case I believe the drives should in fact
be utilising SATA300 speeds).

The dmesg output shows that the maximum speed being negotiated between
the OS and the controller is SATA150, which means there's likely a
driver (FreeBSD) issue going on here.  Keep the jumpers off the drives,
though, otherwise you won't get SATA300 once the problem is fixed.

-- 
| Jeremy Chadwick                                    jdc at parodius.com |
| Parodius Networking                           http://www.parodius.com/ |
| UNIX Systems Administrator                      Mountain View, CA, USA |
| Making life hard for others since 1977.                  PGP: 4BD6C0CB |



More information about the freebsd-current mailing list