[ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set
up
Rusty Nejdl
rnejdl at ringofsaturn.com
Tue Nov 6 21:05:00 PST 2007
>
>>
>> Does SATA300, but has the same "feature" as the OP's Seagate drive:
>> a small jumper that limits the drive to SATA150 unless removed.
>> See below PDF.
>>
>> http://www.seagate.com/ww/v/index.jsp?vgnextoid=e2af99f4fa74c010VgnVCM100000dd04090aRCRD&locale=en-US
>> http://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracuda%207200.10/100402371h.pdf
>>
>
> Jeremy,
>
> Thanks! Like Aryeh, I missed the jumper. I'll test this out tonight when
> I get home.
>
> Rusty
>
I removed the jumpers per the doc and unfortunately, there was no change:
ad12: 715404MB <Seagate ST3750640AS 3.AAK> at ata6-master SATA150
ad16: 715404MB <Seagate ST3750640AS 3.AAK> at ata8-master SATA150
ATA channel 5:
Master: ad10 <WDC WD1500ADFD-00NLR1/20.07P20> Serial ATA v1.0
Slave: no device present
ATA channel 6:
Master: ad12 <ST3750640AS/3.AAK> Serial ATA II
Slave: no device present
ATA channel 7:
Master: acd0 <LITE-ON DVDRW LH-20A1L/BL01> Serial ATA v1.0
Slave: no device present
ATA channel 8:
Master: ad16 <ST3750640AS/3.AAK> Serial ATA II
Slave: no device present
It seems there is either a configuration I'm missing or the kernel is not
picking this up properly.
Sincerely,
Rusty Nejdl
More information about the freebsd-current
mailing list