sata atapi on ich9r

[Aryeh M. Friedman]

>>
> The cpu is
>   CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.68-MHz
> 686-class CPU)
> installed bsd is a i386.

How much RAM?
>
>> Are you SATA/300 devices reported as SATA/150 and/or UDMA33?
>>
> ad4: 305244MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata2-master SATA300
> ad6: 305244MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata3-master SATA300
> ad8: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata4-master SATA300
> acd0: DVDROM <ASUS DVD-E616A3T/1.11> at ata5-master SATA150
> acd1: DVDROM <ASUS DVD-E616A3T/1.11> at ata6-master SATA150
> acd2: DVDR <Optiarc DVD RW AD-7170S/1.00> at ata7-master SATA150

Are the acd's 150 or 300 in real life?
>
> What I find kind of strange too, is that the first harddisk, which
> is plugged into sata0, is called ad4.. but never mind. If I enable
> the jmicron controller, which is also on the bord, the harddisk gets
> even ad10...

I will have to play with this because I get:

acd0: DVDR <TSSTcorpCD/DVDW SH-S183L/SB01> at ata4-master SATA150
ad10: 476940MB <Seagate ST3500630AS 3.AAE> at ata5-master SATA150

both are SATA/300 (perhaps it has something with what ATA port they are
plugged into but as far I know I have them on the first SATA port)

>
>
>> Does it reconize any PATA devices you may have?
>>
> Don't have any.
>
>> The only solution I was found was to use 8-current (i.e. from late sept
>> on wards stuff worked fine [but only after the version fork]).   BTW my
>> SATA/300 devices are still reported as SATA/150 and the PATA device is
>> not seen at all.
>
>>
>>>
>>> Removing atapicam from kernel does help. I can boot, provided there
>>> are no cds/dvds in the drives.
>>>
>>> But trying to play a dvd fails with
>>>  acd0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout -
>>> completing request directly
>>>  acd0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout -
>>> completing request directly
>>>  acd0: FAILURE - SEND_KEY timed out
>>>  acd0: FAILURE - MODE_SENSE_BIG timed out
>>> no matter, if I try on optiarc/asus.
>>
>> Is this true even if you have boot from cd in the cmos?
> Will try this.

Results?