Hi
I was wondering if I am the only one having trouble when I am using DUMP(8) on CURRENT. If get two situations
If I compile a GENERIC kernel and I dump a "40GB volume" that contains app. 14GB of data dump gets to app.
6-7GB and then enters "pause state" on all children - What is weird is that small filesystems e.g. 512MB/1GB
does not show this issue on a GENERIC kernel - however I expect that just "luck"
If I use a kernel withot debugging and WITNESS code all file dumping root, var, etc also enters mutual wait
state on all children on the dump process
This happens when I backup "disk-to-disk" and it does not seem to matter whether I dump to a ATA device or
USB device
I have tried adding "L flag" and without it as its not an active partition - however that does not seem to matter.
The command used are
dump 0uaf /home/backup/root,dump /dev/ar0s1a
There is nothing wrong with the disks etc. all file systems are UFS
Its a pretty nasty error and I am somewhat puzzled
Regards
Thomas
-------------- next part --------------
0 44304 2028 258 8 0 136768 0 wait IW+ v1 0:00.00 dump 0auLCf 128 /usr/home/backup/32Bit/usr.dump /dev/ar0s1f (du
0 45399 44304 231 4 0 136896 134572 sbwait I+ v1 2:56.77 dump: /dev/ar0s1f: pass 4: 59.16% done, finished in 0:19 at Mon
0 45404 45399 271 20 0 136768 134528 pause I+ v1 3:18.43 dump 0auLCf 128 /usr/home/backup/32Bit/usr.dump /dev/ar0s1f (du
0 45406 45399 262 20 0 136768 134528 pause D+ v1 3:18.12 dump 0auLCf 128 /usr/home/backup/32Bit/usr.dump /dev/ar0s1f (du
0 45407 45399 243 20 0 136768 134528 pause I+ v1 3:18.26 dump 0auLCf 128 /usr/home/backup/32Bit/usr.dump /dev/ar0s1f (du
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #1: Wed Jun 27 03:03:21 BST 2007
root at w2fzz0vc03.aah-go-on.com:/usr/obj/usr/src/sys/w2fzz0vc03
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz (3192.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 4280160256 (4081 MB)
avail memory = 4095180800 (3905 MB)
ACPI APIC Table: <DELL B8K >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
Security auditing service present
BSM auditing present
ioapic0: Changing APIC ID to 8
ioapic0 <Version 1.1> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL B8K > on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, f00000 (3) failed
acpi0: reservation of 1000000, 9edbcc00 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xde000000-0xdeffffff,0xa0000000-0xafffffff,0xdc000000-0xddffffff irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3:0:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xdaff0000-0xdaffffff irq 18 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:19:b9:17:16:43
bge0: [ITHREAD]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 10.0 on pci0
isa0: <ISA bus> on isab0
nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0x4c00-0x4c3f,0x5000-0x503f,0x5100-0x513f irq 20 at device 10.1 on pci0
smbus0: <System Management Bus> on nfsmb0
smb0: <SMBus generic I/O> on smbus0
nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
smbus1: <System Management Bus> on nfsmb1
smb1: <SMBus generic I/O> on smbus1
ohci0: <OHCI (generic) USB controller> mem 0xdfffc000-0xdfffcfff irq 21 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfffbf00-0xdfffbfff irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: waiting for BIOS to give up control
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
umass0: <Seagate FreeAgentDesktop, class 0/0, rev 2.00/0.00, addr 2> on uhub1
uhub2: <vendor 0x050d product 0x0237, class 9/0, rev 2.00/1.00, addr 3> on uhub1
uhub2: single transaction translator
uhub2: 7 ports with 7 removable, self powered
rum0: <Belkin Belkin 54g USB Network Adapter, class 0/0, rev 2.00/0.01, addr 4> on uhub1
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
rum0: Ethernet address: 00:17:3f:72:40:90
rum0: if_start running deferred for Giant
umass1: <TEAC CA-200, class 0/0, rev 2.00/4.00, addr 5> on uhub1
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xecf0-0xecff at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf mem 0xdfffd000-0xdfffdfff irq 23 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xfe40-0xfe47,0xfe50-0xfe53,0xfe60-0xfe67,0xfe70-0xfe73,0xfed0-0xfedf mem 0xdfffe000-0xdfffefff irq 20 at device 14.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff mem 0xdffff000-0xdfffffff irq 21 at device 14.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <unknown> at device 4.0 (no driver attached)
pci4: <multimedia, audio> at device 5.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xd9dfb800-0xd9dfbfff,0xd9dfc000-0xd9dfffff irq 18 at device 10.0 on pci4
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 80:b9:19:00:43:16:17:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x9523c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 82:b9:19:16:17:00
fwe0: Ethernet address: 82:b9:19:16:17:00
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 80:b9:19:00:43:16:17:00 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci1: <VGA-compatible display> port 0xbc80-0xbcff mem 0xd1000000-0xd1ffffff,0xc0000000-0xcfffffff,0xd2000000-0xd3ffffff irq 16 at device 0.0 on pci6
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xce7ff,0xce800-0xd7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 152587MB <WDC WD1600ADFD-75NLR1 20.07P20> at ata2-master SATA150
ad6: 152587MB <WDC WD1600ADFD-75NLR1 20.07P20> at ata3-master SATA150
acd0: CDRW <TSSTcorp CD-RW/DVD-ROM TS-H493A/D200> at ata4-master SATA150
acd1: DVDR <TSSTcorp DVD+/-RW TS-H653A/D500> at ata5-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
ar0: 305175MBcd0 at ata4 bus 0 target 0 lun 0 <nVidia MediaShield RAID0 (stripe 64 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
cd0: <TSSTcorp CDRWDVD TS-H493A D200> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Seagate FreeAgentDesktop 100D> Fixed Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
cd1 at ata5 bus 0 target 0 lun 0
cd1: <TSSTcorp DVD+-RW TS-H653A D500> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <TEAC USB HS-CF Card 4.00> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim1 bus 1 target 0 lun 1
da2: <TEAC USB HS-xD/SM 4.00> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim1 bus 1 target 0 lun 2
da3: <TEAC USB HS-MS Card 4.00> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da4 at umass-sim1 bus 1 target 0 lun 3
da4: <TEAC USB HS-SD Card 4.00> Removable Direct Access SCSI-0 device
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
GEOM_LABEL: Label for provider da0s1 is ntfs/Free Agent.
Trying to mount root from ufs:/dev/ar0s3a
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
rum0: link state changed to UP