Dev isp hangs on current
Manfred Antar
null at pozo.com
Sat Jun 2 08:35:58 UTC 2007
At 10:42 PM 6/1/2007, Matthew Jacob wrote:
>make that
>
>isp_1080_LOAD="YES"
>
>
>On 6/1/07, Matthew Jacob <lydianconcepts at gmail.com> wrote:
>>try:
>>
>>1. add
>> isp_fw_1080_LOAD="YES"
>>to your /boot/loader.conf
>>
>>2. Add
>>set hint.isp.0.debug=0x1f
>>
>>fo /boot/loader.conf
>>
>>and send me the output.
>>
>>
>>On 6/1/07, Manfred Antar <null at pozo.com> wrote:
>>> When i build and boot a new kernel on current with isp i get the following :
>>> isp0: <Qlogic ISP 1080 PCI SCSI Adapter> port 0xec00-0xecff mem 0xfcfff000-0xfcffffff irq 9 at device 7.0 on pci1
>>> firmware_get: failed to load firmware image isp_1080
>>> isp0: [ITHREAD]
>>>
>>> And then it just hangs there.
>>> I believe it is because of the new compiler gcc4.2
>>> I have a kernel from May 8th that was built with the old compiler and it boots fine
>>> I tried compiling a kernel with the isp code from May 8th with new compiler and it hangs also.
>>> Anybody else see this.
>>> I can comment out the isp code from my config and current kernel boots fine
>>> Manfred
>
>Here is what i get with those settings (i put hint.isp.0.debug=0x1f into /boot/device.hints file)
>
>/boot/kernel/kernel text=0x47fa04 data=0x431c0+0x44dfc syms=[0x4+0x4e1c0+0x4+0x64600]
>/boot/kernel/linux.ko text=0x1e260 data=0x2660+0x1a4 syms=[0x4+0x3750+0x4+0x3433]
>/boot/kernel/isp_1080.ko text=0x80ac data=0xb0 syms=[0x4+0x230+0x4+0x1a0]
>/
>
> ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
> ³ ³
> ³ ³ ______
> ³ ³ | ____| __ ___ ___
> ³ Welcome to FreeBSD! ³ | |__ | '__/ _ \/ _ \
> ³ ³ | __|| | | __/ __/
> ³ ³ | | | | | | |
> ³ 1. Boot FreeBSD [default] ³ |_| |_| \___|\___|
> ³ 2. Boot FreeBSD with ACPI disabled ³ ____ _____ _____
> ³ 3. Boot FreeBSD in Safe Mode ³ | _ \ / ____| __ \
> ³ 4. Boot FreeBSD in single user mode ³ | |_) | (___ | | | |
> ³ 5. Boot FreeBSD with verbose logging ³ | _ < \___ \| | | |
> ³ 6. Escape to loader prompt ³ | |_) |____) | |__| |
> ³ 7. Reboot ³ | | | |
> ³ ³ |____/|_____/|_____/
> ³ ³
> ³ ³
> ³ ³
> ³ Select option, [Enter] for default ³
> ³ or [Space] to pause timer 8 ³
> ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
>
>
>/boot/kernel/acpi.ko text=0x50ea4 data=0x22e0+0x182c syms=[0x4+0x82c0+0x4+0xad5c]
>GDB: no debug ports present
>KDB: debugger backends: ddb
>KDB: current backend: ddb
>Copyright (c) 1992-2007 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 7.0-CURRENT #0: Sat Jun 2 00:45:43 PDT 2007
> root at pozo.com:/usr/src/sys/i386/compile/DELL
>WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
>WARNING: MPSAFE network stack disabled, expect reduced performance.
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel Pentium III (996.68-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x68a Stepping = 10
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory = 534736896 (509 MB)
>avail memory = 513372160 (489 MB)
>Security auditing service present
>BSM auditing present
>registered firmware set <isp_1080>
>acpi0: <DELL GX150 > on motherboard
>acpi0: [ITHREAD]
>acpi0: Power Button (fixed)
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, f00000 (3) failed
>acpi0: reservation of 1000000, 1edf7000 (3) failed
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>cpu0: <ACPI CPU> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>vgapci0: <VGA-compatible display> mem 0xf4000000-0xf7ffffff,0xfe080000-0xfe0fffff irq 9 at device 2.0 on pci0
>agp0: <Intel 82815 (i815 GMCH) SVGA controller> on vgapci0
>pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>isp0: <Qlogic ISP 1080 PCI SCSI Adapter> port 0xec00-0xecff mem 0xfcfff000-0xfcffffff irq 9 at device 7.0 on pci1
>isp0: [ITHREAD]
>
>Still hangs here,not much info something is getting wedged
>With the old kernel i get:
>isp0: <Qlogic ISP 1080 PCI SCSI Adapter> port 0xec00-0xecff mem 0xfcfff000-0xfcffffff irq 9 at device 7.0 on pci1
>firmware_get: failed to load firmware image isp_1080
>isp0: [ITHREAD]
>isp0: Board Type 1080, Chip Revision 0x1, resident F/W Revision 2.13.5
>and it keeps booting fine.I don't have the isp_1080.ko for the old kernel or the firmware compiled in the kernel just the isp driver itself compiled into kernel
>all i use this board for is a tape drive,there are no disks hooked up to it.
>
>==================================
>|| null at pozo.com ||
>|| Ph. (415) 681-6235 ||
>==================================
More information about the freebsd-current
mailing list