ichwd fixes / patches

Mike Tancsa mike at sentex.net
Thu Sep 15 10:20:22 PDT 2005

At 04:23 AM 14/04/2005, Dag-Erling Smørgrav wrote:
>Mike Tancsa <mike at sentex.net> writes:
> > Any chance someone could champion / commit the fixes in
> > http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/79698 and perhaps MFC
> > ?  Its non functional right now and the patches provided there make it
> > work once again.
>ichwd is mine...  the PR originator sent me patches a couple of days
>ago which I'll test.  I have both ICH5 and ICH6 hardware to test on.

FYI, ICH7 boards seem to work just fine with the 
above fixes and the PCI IDs defined.  I made a 
followup to the bug report, but made a typo in 
the board name. Its actually a  945 chipset, not 925.

sample dmesg below

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA4 #0: Thu Sep 15 23:21:18 EDT 2005
     mdtancsa at formerly-itx-vpn.sentex.ca:/usr/obj/usr/src/sys/smp
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2805.61-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf44  Stepping = 4
   AMD Features=0x20000000<LM>
   Hyperthreading: 2 logical CPUs
real memory  = 1063841792 (1014 MB)
avail memory = 1029885952 (982 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D945GTP> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 9 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 
0x2080-0x209f irq 23 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 
0x2060-0x207f irq 19 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 
0x2040-0x205f irq 18 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 
0x2020-0x203f irq 16 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 
0x509c4400-0x509c47ff irq 23 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, 
Version - 2.1.7> port 0x1040-0x107f mem 
0x50820000-0x5083ffff,0x50800000-0x5081ffff irq 21 at device 0.0 on pci6
em0: Ethernet address: 00:0e:0c:5d:f8:ca
em0:  Speed:N/A  Duplex:N/A
twe0: <3ware Storage Controller. Driver version> port 0x1080-0x108f mem 
0x50000000-0x507fffff irq 22 at device 1.0 on pci6
twe0: AEN: <twe0: incomplete unit for unknown unit 0>
twe0: AEN: <twe0: degraded unit for unknown unit 0>
twe0: 2 ports, Firmware FE7X, BIOS BE7X
fwohci0: <Texas Instruments TSB43AB23> mem 
0x50845000-0x508457ff,0x50840000-0x50843fff irq 17 at device 5.0 on pci6
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:13:20:00:00:6c:21:46
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:13:20:6c:21:46
fwe0: Ethernet address: 02:13:20:6c:21:46
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 
0x1000-0x103f mem 0x50844000-0x50844fff irq 20 at device 8.0 on pci6
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:13:20:6c:21:46
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20b0-0x20bf irq 18 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA150 controller> port 
mem 0x509c4000-0x509c43ff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcb000-0xcbfff,0xcc000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 38166MB <Seagate ST340014A 8.54> at ata0-master UDMA100
twed0: <Unit 0, TwinStor, Degraded> on twe0
twed0: 38165MB (78163312 sectors)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a 

More information about the freebsd-current mailing list