RELENG_5 hangs during boot

Michael Reifenberger mike at Reifenberger.com
Sun Sep 26 04:40:21 PDT 2004


Hi,
after upgrading a may-25 -current to the latest RELENG_5 I get an
hang after attaching all firewire, ATA and SCSI devices but before
mounting root (can get into DDB though) after printing:

...
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
<HANG>

The board is an Intel Desktop Board D845GERG2.
A dmesg is attached (sorry booting -v is too verbose to get all infos)
A mptable and acpidump and pciconf output too.

How to debug with ddb where it hang?

Bye/2
---
Michael Reifenberger, Business Development Manager SAP-Basis, Plaut Consulting
Comp: Michael.Reifenberger at plaut.de | Priv: Michael at Reifenberger.com
       http://www.plaut.de           |       http://www.Reifenberger.com
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Mon Sep 20 15:49:30 CEST 2004
    root at totum.reifenberger.com:/usr/src/sys/i386/compile/totum
kern.vm.kmem.size is now called vm.kmem_size!
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0981000.
Preloaded elf module "/boot/kernel/vinum.ko" at 0xc09811cc.
Preloaded elf module "/boot/kernel/aio.ko" at 0xc0981278.
Preloaded elf module "/boot/kernel/geom_ccd.ko" at 0xc0981320.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09813d0.
ACPI APIC Table: <INTEL  D845GRG2>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.10-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 1064566784 (1015 MB)
avail memory = 1032060928 (984 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL D845GRG2> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 16 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffa7fc00-0xffa7ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <VIA VT6306> port 0xdc00-0xdc7f mem 0xff8fe800-0xff8fefff irq 21 at device 0.0 on pci1
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:06:00:00:00:42:55
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc2, gen=1, CYCLEMASTER mode
firewire0: 3 nodes, maxhop <= 2, cable IRM = 2 (me)
firewire0: bus manager 2 (me)
ahc0: <Adaptec 2940 Ultra2 SCSI adapter (OEM)> port 0xd800-0xd8ff mem 0xff8ff000-0xff8fffff irq 22 at device 1.0 on pci1
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
fwohci1: <Texas Instruments TSB43AB23> mem 0xff8f8000-0xff8fbfff,0xff8fe000-0xff8fe7ff irq 18 at device 2.0 on pci1
fwohci1: [GIANT-LOCKED]
fwohci1: OHCI version 1.10 (ROM=1)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:01:b7:00:00:01:51:3c
fwohci1: Phy 1394a available S400, 3 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
sbp1: <SBP-2/SCSI over FireWire> on firewire1
fwohci1: Initiate bus reset
fwohci1: node_id=0xc800ffc3, gen=1, CYCLEMASTER mode
firewire1: 4 nodes, maxhop <= 2, cable IRM = 3 (me)
firewire1: bus manager 3 (me)
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xd480-0xd4bf mem 0xff8fd000-0xff8fdfff irq 20 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:07:e9:d4:05:06
fxp0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0xe080-0xe0bf,0xe400-0xe4ff mem 0xffa7f400-0xffa7f4ff,0xffa7f800-0xffa7f9ff irq 17 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
acpi_button0: <Sleep Button> on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 540> MLC,PCL,PML
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <Option ROM> at iomem 0xcb800-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2400095620 Hz quality 800
Timecounters tick every 1.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 58644MB <IC35L060AVV207-0> [119150/16/63] at ata0-master UDMA100
ad1: 58644MB <IC35L060AVV207-0> [119150/16/63] at ata0-slave UDMA100
acd0: DVDR <PLEXTOR DVDR PX-708A> at ata1-master PIO4
Waiting 10 seconds for SCSI devices to settle
firewire0: New S400 device ID:0001d200e00d31f1
firewire1: New S400 device ID:0001d200e00d2f5d
firewire0: New S400 device ID:0010b920007d28f8
firewire1: New S400 device ID:0010b92000a7e138
firewire1: New S400 device ID:0001d200e00918e3
da2 at ahc0 bus 0 target 0 lun 0
da2: <easyRAID Volume Set # 00 R001> Fixed Direct Access SCSI-3 device 
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da2: 953899MB (1953585152 512 byte sectors: 255H 63S/T 121605C)
da0 at sbp0 bus 0 target 0 lun 0
da0: <Oxford S OXFORD IDE Devic 4133> Fixed Simplified Direct Access SCSI-4 device 
da0: 50.000MB/s transfers
da0: 194481MB (398297088 512 byte sectors: 255H 63S/T 24792C)
da1 at sbp0 bus 0 target 1 lun 0
da1: <Maxtor OneTouch 0000> Fixed Direct Access SCSI-4 device 
da1: 50.000MB/s transfers
da1: 239371MB (490232832 512 byte sectors: 255H 63S/T 30515C)
da3 at sbp1 bus 0 target 0 lun 0
da3: <Oxford S OXFORD IDE Devic 4131> Fixed Simplified Direct Access SCSI-4 device 
da3: 50.000MB/s transfers
da3: 117246MB (240121728 512 byte sectors: 255H 63S/T 14946C)
da4 at sbp1 bus 0 target 1 lun 0
da4: <Oxford S OXFORD IDE Devic 4133> Fixed Simplified Direct Access SCSI-4 device 
da4: 50.000MB/s transfers
da4: 194481MB (398297088 512 byte sectors: 255H 63S/T 24792C)
da5 at sbp1 bus 0 target 2 lun 0
da5: <Maxtor OneTouch 0000> Fixed Direct Access SCSI-4 device 
da5: 50.000MB/s transfers
da5: 239371MB (490232832 512 byte sectors: 255H 63S/T 30515C)
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR   PX-708A 1.06> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/ad1s1a
lpt0: switched to polled standard mode
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $
vmmon: Module vmmon: initialized
vmnet1: Ethernet address: 00:bd:a2:85:00:01
fxp0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
ccd0: mirror/parity forces uniform flag
WARNING: /mnt/a was not properly dismounted
-------------- next part --------------

===============================================================================

MPTable, version 2.0.15

 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00
 searching CMOS 'top of mem' @ 0x0009f800 (638K)
 searching default 'top of mem' @ 0x0009fc00 (639K)
 searching BIOS @ 0x000f0000

 MP FPS found in BIOS @ physical addr: 0x000ff780

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000ff780
  signature:			'_MP_'
  length:			16 bytes
  version:			1.4
  checksum:			0x0b
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x000fd6b0
  signature:			'PCMP'
  base table length:		328
  version:			1.4
  checksum:			0x86
  OEM ID:			''
  Product ID:			'BrkdleG-ICH4'
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			34
  local APIC address:		0xfee00000
  extended table length:	124
  extended table checksum:	13

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	Flags
		 0	 0x14	 BSP, usable	 15	 2	 7	 0xbfebfbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 1	 PCI   
		 2	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 1	 0x20	 usable		 0xfec00000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	 conforms    conforms	     2	   0	      1	   0
		INT	 conforms    conforms	     2	   1	      1	   1
		INT	 conforms    conforms	     2	   0	      1	   2
		INT	 conforms    conforms	     2	   3	      1	   3
		INT	 conforms    conforms	     2	   4	      1	   4
		INT	 conforms    conforms	     2	   5	      1	   5
		INT	 conforms    conforms	     2	   6	      1	   6
		INT	 conforms    conforms	     2	   7	      1	   7
		INT	active-hi        edge	     2	   8	      1	   8
		INT	active-hi       level	     2	   9	      1	   9
		INT	 conforms    conforms	     2	  10	      1	  10
		INT	 conforms    conforms	     2	  11	      1	  11
		INT	 conforms    conforms	     2	  12	      1	  12
		INT	 conforms    conforms	     2	  13	      1	  13
		INT	 conforms    conforms	     2	  14	      1	  14
		INT	 conforms    conforms	     2	  15	      1	  15
		INT	active-lo       level	     0	29:A	      1	  16
		INT	active-lo       level	     0	29:B	      1	  19
		INT	active-lo       level	     0	29:C	      1	  18
		INT	active-lo       level	     0	29:D	      1	  23
		INT	active-lo       level	     0	31:A	      1	  18
		INT	active-lo       level	     0	31:B	      1	  17
		INT	active-lo       level	     1	 8:A	      1	  20
		INT	active-lo       level	     0	 2:A	      1	  16
		INT	active-lo       level	     1	 0:A	      1	  21
		INT	active-lo       level	     1	 1:A	      1	  22
		INT	active-lo       level	     1	 2:A	      1	  18
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	 conforms    conforms	     0	 0:A	    255	   0
		NMI	 conforms    conforms	     0	 0:A	    255	   1

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0xd000
 address range: 0x2000
--
System Address Space
 bus ID: 0 address type: I/O address
 address base: 0x0
 address range: 0x100
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xa0000
 address range: 0x20000
--
System Address Space
 bus ID: 0 address type: memory address
 address base: 0xff800000
 address range: 0x300000
--
System Address Space
 bus ID: 0 address type: prefetch address
 address base: 0xe6a00000
 address range: 0x18200000
--
Bus Heirarchy
 bus ID: 2 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000000
--
Compatibility Bus Address
 bus ID: 0 address modifier: add
 predefined range: 0x00000001

===============================================================================

-------------- next part --------------
A non-text attachment was scrubbed...
Name: totum.asl.gz
Type: application/octet-stream
Size: 12542 bytes
Desc: 
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20040926/7bf9381e/totum.asl.obj
-------------- next part --------------
hostb0 at pci0:0:0:	class=0x060000 card=0x25608086 chip=0x25608086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82845G/GL/GV/GE/PE DRAM Controller / Host-Hub I/F Bridge'
    class    = bridge
    subclass = HOST-PCI
agp0 at pci0:2:0:	class=0x030000 card=0x52478086 chip=0x25628086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82845G/GL/GV/GE/PE Integrated Graphics Device'
    class    = display
    subclass = VGA
uhci0 at pci0:29:0:	class=0x0c0300 card=0x52478086 chip=0x24c28086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBM (ICH4/M) USB UHCI Controller #1'
    class    = serial bus
    subclass = USB
uhci1 at pci0:29:1:	class=0x0c0300 card=0x52478086 chip=0x24c48086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBM (ICH4/M) USB UHCI Controller #2'
    class    = serial bus
    subclass = USB
uhci2 at pci0:29:2:	class=0x0c0300 card=0x52478086 chip=0x24c78086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBM (ICH4/M) USB UHCI Controller #3'
    class    = serial bus
    subclass = USB
ehci0 at pci0:29:7:	class=0x0c0320 card=0x52478086 chip=0x24cd8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBM (ICH4/M) USB EHCI Controller'
    class    = serial bus
    subclass = USB
pcib1 at pci0:30:0:	class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BA/CA/DB/EB/ER (ICH2/3/4/5/5R) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0 at pci0:31:0:	class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0 at pci0:31:1:	class=0x01018a card=0x52478086 chip=0x24cb8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
none0 at pci0:31:3:	class=0x0c0500 card=0x52478086 chip=0x24c38086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBM (ICH4/M) SMBus Controller'
    class    = serial bus
    subclass = SMBus
pcm0 at pci0:31:5:	class=0x040100 card=0x01038086 chip=0x24c58086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBM (ICH4/M) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
fwohci0 at pci1:0:0:	class=0x0c0010 card=0x30441106 chip=0x30441106 rev=0x46 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
    class    = serial bus
    subclass = FireWire
ahc0 at pci1:1:0:	class=0x010000 card=0x21809005 chip=0x00109005 rev=0x00 hdr=0x00
    vendor   = 'Adaptec'
    device   = 'AHA-2940U2W/U2B AHA-2950U2W Ultra2 SCSI Controller'
    class    = mass storage
    subclass = SCSI
fwohci1 at pci1:2:0:	class=0x0c0010 card=0x00000000 chip=0x8024104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller'
    class    = serial bus
    subclass = FireWire
fxp0 at pci1:8:0:	class=0x020000 card=0x30118086 chip=0x10398086 rev=0x82 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) PRO/100 VE Network Connection'
    class    = network
    subclass = ethernet


More information about the freebsd-current mailing list