ATTN Soren: BETA3 still hangs on ATAPI DVD Detection during boot

Thomas T. Veldhouse veldy at veldy.net
Sun Sep 5 10:01:42 PDT 2004


I just downloaded and tried to install FreeBSD 5.3-BETA3 and it still 
hangs in the same location as it has for more than one month.  However, 
now it boots alright when I chose the verbose logging option 5.  I did 
the install and have attached the output of the subsequent dmesg.

Tom Veldhouse
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #0: Sat Sep  4 12:07:48 UTC 2004
    root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2b000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2b21c.
Calibrating clock(s) ... i8254 clock: 1193181 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3049502520 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3049.50-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 536276992 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000001f640fff, 513900544 bytes (125464 pages)
avail memory = 515112960 (491 MB)
Table 'FACP' at 0xfd588
Table 'SSDT' at 0xfffe5e96
Table 'APIC' at 0xfd5fc
MADT: Found table at 0xfd5fc
MP Configuration Table version 1.4 found at 0xc00f0000
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: disabled
MADT: Found CPU APIC ID 3 ACPI ID 4: disabled
ACPI APIC Table: <DELL   8250   >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xbe8e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL 8250   > on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25308086)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fba30
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 14 15
embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 14 15
embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 14 15
embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 14 15
embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 14 15
embedded    1    0    B   0x61  3 4 5 6 7 9 10 11 14 15
embedded    2   12    A   0x62  3 4 5 6 7 9 10 11 14 15
slot 1      2    7    A   0x60  3 4 5 6 7 9 10 11 14 15
slot 1      2    7    B   0x61  3 4 5 6 7 9 10 11 14 15
slot 1      2    7    C   0x62  3 4 5 6 7 9 10 11 14 15
slot 1      2    7    D   0x63  3 4 5 6 7 9 10 11 14 15
slot 2      2    8    A   0x61  3 4 5 6 7 9 10 11 14 15
slot 2      2    8    B   0x62  3 4 5 6 7 9 10 11 14 15
slot 2      2    8    C   0x63  3 4 5 6 7 9 10 11 14 15
slot 2      2    8    D   0x60  3 4 5 6 7 9 10 11 14 15
slot 3      2    9    A   0x62  3 4 5 6 7 9 10 11 14 15
slot 3      2    9    B   0x63  3 4 5 6 7 9 10 11 14 15
slot 3      2    9    C   0x60  3 4 5 6 7 9 10 11 14 15
slot 3      2    9    D   0x61  3 4 5 6 7 9 10 11 14 15
slot 4      2   10    A   0x63  3 4 5 6 7 9 10 11 14 15
slot 4      2   10    B   0x60  3 4 5 6 7 9 10 11 14 15
slot 4      2   10    C   0x61  3 4 5 6 7 9 10 11 14 15
slot 4      2   10    D   0x62  3 4 5 6 7 9 10 11 14 15
embedded    2    1    A   0x63  3 4 5 6 7 9 10 11 14 15
embedded    2    1    B   0x62  3 4 5 6 7 9 10 11 14 15
embedded    2    1    C   0x60  3 4 5 6 7 9 10 11 14 15
embedded    2    2    A   0x62  3 4 5 6 7 9 10 11 14 15
embedded    2    2    B   0x61  3 4 5 6 7 9 10 11 14 15
embedded    2    2    C   0x63  3 4 5 6 7 9 10 11 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f8000000, size 26, enabled
found->	vendor=0x8086, dev=0x2530, revid=0x04
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2532, revid=0x04
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x244e, revid=0x04
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2440, revid=0x04
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found->	vendor=0x8086, dev=0x244b, revid=0x04
	bus=0, slot=31, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000ccf0, size  4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2443, revid=0x04
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=17
agp0: <Intel 82850 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xefff
pcib1:   memory decode     0xff800000-0xff9fffff
pcib1:   prefetched decode 0xe8000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff
	map[14]: type 4, range 32, base 0000ec00, size  8, enabled
pcib1: device (null) requested decoded I/O range 0xec00-0xecff
	map[18]: type 1, range 32, base ff8f0000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xff8f0000-0xff8fffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found->	vendor=0x1002, dev=0x4e44, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0183, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base e8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xe8000000-0xefffffff
	map[14]: type 1, range 32, base ff8e0000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xff8e0000-0xff8effff
found->	vendor=0x1002, dev=0x4e64, revid=0x00
	bus=1, slot=0, func=1
	class=03-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xdfff
pcib2:   memory decode     0xff600000-0xff7fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2:   Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[20]: type 4, range 32, base 0000dce0, size  5, enabled
pcib2: device (null) requested decoded I/O range 0xdce0-0xdcff
pcib2: matched entry for 2.1.INTA
pcib2: slot 1 INTA hardwired to IRQ 19
found->	vendor=0x1106, dev=0x3038, revid=0x50
	bus=2, slot=1, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=19
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000dcc0, size  5, enabled
pcib2: device (null) requested decoded I/O range 0xdcc0-0xdcdf
pcib2: matched entry for 2.1.INTB
pcib2: slot 1 INTB hardwired to IRQ 18
found->	vendor=0x1106, dev=0x3038, revid=0x50
	bus=2, slot=1, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=18
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base ff6ffc00, size  8, enabled
pcib2: device (null) requested decoded memory range 0xff6ffc00-0xff6ffcff
pcib2: matched entry for 2.1.INTC
pcib2: slot 1 INTC hardwired to IRQ 16
found->	vendor=0x1106, dev=0x3104, revid=0x51
	bus=2, slot=1, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=16
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000dca0, size  5, enabled
pcib2: device (null) requested decoded I/O range 0xdca0-0xdcbf
pcib2: matched entry for 2.2.INTA
pcib2: slot 2 INTA hardwired to IRQ 18
found->	vendor=0x1106, dev=0x3038, revid=0x50
	bus=2, slot=2, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=18
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000dc80, size  5, enabled
pcib2: device (null) requested decoded I/O range 0xdc80-0xdc9f
pcib2: matched entry for 2.2.INTB
pcib2: slot 2 INTB hardwired to IRQ 17
found->	vendor=0x1106, dev=0x3038, revid=0x50
	bus=2, slot=2, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=17
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base ff6ff800, size  8, enabled
pcib2: device (null) requested decoded memory range 0xff6ff800-0xff6ff8ff
pcib2: matched entry for 2.2.INTC
pcib2: slot 2 INTC hardwired to IRQ 19
found->	vendor=0x1106, dev=0x3104, revid=0x51
	bus=2, slot=2, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=19
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base ff6fe000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xff6fe000-0xff6fefff
	map[14]: type 4, range 32, base 0000dc70, size  4, enabled
pcib2: device (null) requested decoded I/O range 0xdc70-0xdc7f
pcib2: matched entry for 2.8.INTA
pcib2: slot 8 INTA hardwired to IRQ 17
found->	vendor=0x14e4, dev=0x4212, revid=0x02
	bus=2, slot=8, func=0
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=17
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000dc40, size  5, enabled
pcib2: device (null) requested decoded I/O range 0xdc40-0xdc5f
pcib2: matched entry for 2.9.INTA
pcib2: slot 9 INTA hardwired to IRQ 18
found->	vendor=0x1102, dev=0x0002, revid=0x0a
	bus=2, slot=9, func=0
	class=04-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=18
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000dc68, size  3, enabled
pcib2: device (null) requested decoded I/O range 0xdc68-0xdc6f
found->	vendor=0x1102, dev=0x7002, revid=0x0a
	bus=2, slot=9, func=1
	class=09-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ff6fd000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xff6fd000-0xff6fdfff
	map[14]: type 4, range 32, base 0000dc00, size  6, enabled
pcib2: device (null) requested decoded I/O range 0xdc00-0xdc3f
	map[18]: type 1, range 32, base ff6c0000, size 17, enabled
pcib2: device (null) requested decoded memory range 0xff6c0000-0xff6dffff
pcib2: matched entry for 2.12.INTA
pcib2: slot 12 INTA hardwired to IRQ 18
found->	vendor=0x8086, dev=0x1229, revid=0x10
	bus=2, slot=12, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=18
	powerspec 2  supports D0 D1 D2 D3  current D0
uhci0: <VIA 83C572 USB controller> port 0xdce0-0xdcff irq 19 at device 1.0 on pci2
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdce0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uscanner0: Visioneer USB Scanner, rev 1.10/1.00, addr 2
uhci1: <VIA 83C572 USB controller> port 0xdcc0-0xdcdf irq 18 at device 1.1 on pci2
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdcc0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 1.2 (no driver attached)
uhci2: <VIA 83C572 USB controller> port 0xdca0-0xdcbf irq 18 at device 2.0 on pci2
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdca0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugen0: Logitech Logitech Extreme 3D Pro, rev 1.10/35.00, addr 2
uhci3: <VIA 83C572 USB controller> port 0xdc80-0xdc9f irq 17 at device 2.1 on pci2
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc80
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 2.2 (no driver attached)
pci2: <simple comms> at device 8.0 (no driver attached)
pci2: <multimedia, audio> at device 9.0 (no driver attached)
pci2: <input device> at device 9.1 (no driver attached)
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xff6c0000-0xff6dffff,0xff6fd000-0xff6fdfff irq 18 at device 12.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff6fd000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 1028 0145 0010
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:07:e9:8f:30:de
fxp0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=10 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0xc001 0xc011 0xc001 0xc001
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xcd000-0xcffff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc081 0xc081 0xc081 0xc081
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 3049502520 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH2 chip
ata0-master: setting UDMA100 on Intel ICH2 chip
ata0-slave: setting PIO4 on Intel ICH2 chip
ata0-slave: setting UDMA66 on Intel ICH2 chip
ad0: <WDC WD1200JB-75CRA0/16.06V16> ATA-5 disk at ata0-master
ad0: 114440MB (234375000 sectors), 232514 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234356157
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 119990352384 end 119990384639
ad1: <WDC WD205BA/16.13M16> ATA-4 disk at ata0-slave
ad1: 19574MB (40088160 sectors), 39770 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad1
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 30us
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 40us
ata1-master: setting PIO4 on Intel ICH2 chip
ata1-master: setting UDMA33 on Intel ICH2 chip
ata1-slave: setting PIO4 on Intel ICH2 chip
ata1-slave: setting UDMA33 on Intel ICH2 chip
acd0: <LITEON DVD-ROM LTD163/GDHJ> DVDROM drive at ata1 as master
acd0:  512KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <_NEC DVD+RW ND-1100A/10GE> CDRW drive at ata1 as slave
acd1: read 6890KB/s (6890KB/s) write 2755KB/s (2755KB/s), 2048KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
[0] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/15/63 s:28087920 l:12000240
[1] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:28087857
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 14381015040 length 6144122880 end 20525137919
GEOM: Configure ad1s2, start 32256 length 14380982784 end 14381015039
GEOM: Configure ad1s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad1s2b, start 268435456 length 536870912 end 805306367
GEOM: Configure ad1s2c, start 0 length 14380982784 end 14380982783
GEOM: Configure ad1s2d, start 805306368 length 268435456 end 1073741823
GEOM: Configure ad1s2e, start 1073741824 length 268435456 end 1342177279
GEOM: Configure ad1s2f, start 1342177280 length 8589934592 end 9932111871
GEOM: Configure ad1s2g, start 9932111872 length 4448870912 end 14380982783
Mounting root from ufs:/dev/ad1s2a
start_init: trying /sbin/init
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 250 bytes
Desc: OpenPGP digital signature
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20040905/ecee4a20/signature-0001.bin


More information about the freebsd-current mailing list