re crash

[Chris Pepper]

	I just rebooted my HP Pavilion 7915 w/ re card (Asante 
gigabit NIC), and it crashed. I immediately rebooted, and the system 
came all the way up.


						Chris Pepper

miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x2400-0x24ff 
mem 0xf4101
re0: Ethernet address: 00:0e:2e:06:ea:82
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTo
re0: diagnostic failed, failed to receive packet in loopback mode
re0: attach aborted due to hardware diag failure


Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x98


	The full dmesg to the crash is:

  .??????????????????????????????????????????
  .                                         .
  .                                         .              ,        ,
  .                                         .             /(        )`
  .          Welcome to FreeBSD!            .             \ \___   / |
  .                                         .             /- _  `-/  '
  .                                         .            (/\/ \ \   /\
  .  1. Boot FreeBSD [default]              .            / /   | `    \
  .  2. Boot FreeBSD with ACPI enabled      .            O O   ) /    |
  .  3. Boot FreeBSD in Safe Mode           .            `-^--'`<     '
  .  4. Boot FreeBSD in single user mode    .           (_.)  _  )   /
  .  5. Boot FreeBSD with verbose logging   .            `.___/`    /
  .  6. Escape to loader prompt             .              `-----' /
  .  7. Reboot                              . <----.     __ / __   \
  .                                         . <----|====O)))==) \) /====
  .                                         . <----'    `--' `.__,' \
  .                                         .              |        |
  .                                         .               \       /       /\
  .  Select option, [Enter] for default     .          ______( (_  / \______/
  .  or [Space] to pause timer  0           .        ,'  ,-----'   |
  .?????????????????????????????????????????.        `--{__________)

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #2: Wed Jul 21 19:58:36 EDT 2004
     root at guest.reppep.com:/usr/obj/usr/src/sys/REPPEP5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc092b000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (1102.50-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
 
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C>
real memory  = 401539072 (382 MB)
avail memory = 380456960 (362 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:1 INTA BIOS irq 9
pci_cfgintr: 0:31 INTD BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 9
agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem 
0xf4000000-0xf407ffff,0xf800
pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:8 INTA BIOS irq 9
pci_cfgintr: 1:9 INTA BIOS irq 9
pci_cfgintr: 1:10 INTA BIOS irq 10
atapci0: <Promise PDC20268 UDMA100 controller> port 
0x2000-0x200f,0x2010-0x20131
atapci0: [MPSAFE]
ata2: at 0x2020 on atapci0
ata2: [MPSAFE]
ata3: at 0x2018 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2080-0x20ff mem 
0xf4104000-0xf411
xl0: Ethernet address: 00:04:76:df:f2:82
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x2400-0x24ff 
mem 0xf4101
re0: Ethernet address: 00:0e:2e:06:ea:82
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTo
re0: diagnostic failed, failed to receive packet in loopback mode
re0: attach aborted due to hardware diag failure


Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x98
-- 
Chris Pepper:               <http://www.reppep.com/~pepper/>
Rockefeller University:     <http://www.rockefeller.edu/>