APIC-UP related panic
Harald Schmalzbauer
h at schmalzbauer.de
Wed Nov 5 23:48:17 PST 2003
Hello,
I have one reproducable panic with sources from 04. Nov when enabling "device
apic" in the kernel.
While building OpenOffice about 1 1/2 hours after start the system reboots.
This is absolutely reproducable. Removing device apic from the kernel solves
the problem!
The only thing I have are these lines from /var/log/messages:
(attached the different dmesgs)
Nov 5 13:41:40 cale syslogd: kernel boot file is /boot/kernel/kernel
Nov 5 13:41:40 cale kernel: instruction pointer = 0x8:0xc054c85d
Nov 5 13:41:40 cale kernel: stack pointer = 0x10:0xcdc9dbe0
Nov 5 13:41:40 cale kernel: frame pointer = 0x10:0xcdc9dbe4
Nov 5 13:41:40 cale kernel: code segment = base 0x0, limit
0xfffff, type 0x1b
Nov 5 13:41:40 cale kernel: = DPL 0, pres 1, def32 1, gran 1
Nov 5 13:41:40 cale kernel: processor eflags = interrupt enabled, IOPL = 0
Nov 5 13:41:40 cale kernel: current process = 26 (irq16: nvidia0)
Nov 5 13:41:40 cale kernel: trap number = 30
Nov 5 13:41:40 cale kernel: panic: unknown/reserved trap
Nov 5 13:41:40 cale kernel:
Nov 5 13:41:40 cale kernel: syncing disks, buffers remaining... 2202 2202
2202 2202 2202 2202 2202
2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202 2202
Nov 5 13:41:40 cale kernel: giving up on 1022 buffers
Nov 5 13:41:40 cale kernel: Uptime: 1h38m28s
Nov 5 13:41:40 cale kernel: Shutting down ACPI
Nov 5 13:41:40 cale kernel: stray irq9
Nov 5 13:41:40 cale kernel: Automatic reboot in 15 seconds - press a key on
the console to abort
Nov 5 13:41:40 cale kernel: Rebooting...
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #28: Tue Nov 4 22:18:02 CET 2003
harry at cale.flintsbach.schmalzbauer.de:/usr/obj/usr/src/sys/CALE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09c1000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc09c1244.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc09c12f0.
ACPI APIC Table: <D815EA EA81510A>
Timecounter "i8254" frequency 1183576 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU 1100MHz (1095.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268173312 (255 MB)
avail memory = 250781696 (239 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc07600e2 (1000022)
VESA: NVIDIA
acpi0: <D815EA D815EPFV> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f2a10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci2: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
nvidia0: <GeForce4 MX 440 with AGP8X> mem 0xf0000000-0xf3ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci2
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfc9ff000-0xfc9fffff irq 20 at device 8.0 on pci1
fxp0: Ethernet address 00:03:47:f0:c2:ef
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 19 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 17 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 23 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2
uhub2: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
uhub3: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 4
uhub3: 2 ports with 2 removable, bus powered
pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1885 AC97 Codec>
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xd0800-0xd17ff,0xcf800-0xd07ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1095818846 Hz quality 800
Timecounters tick every 1.000 msec
GEOM: create disk ad0 dp=0xc2d97570
ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100
acd0: CDROM <SONY CDU4811> at ata1-master PIO4
pcm0: measured ac97 link rate at 55928 Hz
(probe2:ata1:0:0:0): Recovered Sense
(probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe2:ata1:0:0:0): CAM Status: SCSI Status Error
(probe2:ata1:0:0:0): SCSI Status: Check Condition
(probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(probe2:ata1:0:0:0): Invalid field in CDB
(probe2:ata1:0:0:0): Recovered Sense
(probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe2:ata1:0:0:0): CAM Status: SCSI Status Error
(probe2:ata1:0:0:0): SCSI Status: Check Condition
(probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0
(probe2:ata1:0:0:0): Invalid field in CDB
pass0 at ata1 bus 0 target 0 lun 0
pass0: <SONY CDU4811 PY0A> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad0s2a
Warning: pid 565 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 571 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 572 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 602 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 603 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 604 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 605 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 608 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 607 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 616 used static ldt allocation.
See the i386_set_ldt man page for more info
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #30: Thu Nov 6 00:10:38 CET 2003
harry at cale.flintsbach.schmalzbauer.de:/usr/obj/usr/src/sys/CALE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0809000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0809244.
Timecounter "i8254" frequency 1183579 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU 1100MHz (1096.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268173312 (255 MB)
avail memory = 250793984 (239 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0758da2 (1000022)
VESA: NVIDIA
acpi0: <D815EA D815EPFV> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f2a10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 31 INTD is routed to irq 7
pcib0: slot 31 INTB is routed to irq 9
pcib0: slot 31 INTC is routed to irq 10
pcib0: slot 31 INTB is routed to irq 9
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci2: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci2: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
pcib2: slot 8 INTA is routed to irq 11
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfc9ff000-0xfc9fffff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:03:47:f0:c2:ef
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 7 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 9 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2
uhub2: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
uhub3: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 4
uhub3: 2 ports with 2 removable, bus powered
pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0
pcm0: <Analog Devices AD1885 AC97 Codec>
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xd0800-0xd17ff,0xcf800-0xd07ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1096367008 Hz quality 800
Timecounters tick every 1.000 msec
GEOM: create disk ad0 dp=0xc2e05570
ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100
acd0: CDROM <SONY CDU4811> at ata1-master PIO4
pcm0: measured ac97 link rate at 55934 Hz
Mounting root from ufs:/dev/ad0s2a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 12 12 2 2
done
Uptime: 50s
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #30: Thu Nov 6 00:10:38 CET 2003
harry at cale.flintsbach.schmalzbauer.de:/usr/obj/usr/src/sys/CALE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09b8000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc09b8244.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc09b82f0.
Timecounter "i8254" frequency 1183574 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU 1100MHz (1095.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268173312 (255 MB)
avail memory = 250781696 (239 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0758da2 (1000022)
VESA: NVIDIA
acpi0: <D815EA D815EPFV> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f2a10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 31 INTD is routed to irq 7
pcib0: slot 31 INTB is routed to irq 9
pcib0: slot 31 INTC is routed to irq 10
pcib0: slot 31 INTB is routed to irq 9
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci2: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce4 MX 440 with AGP8X> mem 0xf0000000-0xf3ffffff,0xfd000000-0xfdffffff irq 11 at device 0.0 on pci2
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
pcib2: slot 8 INTA is routed to irq 11
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfc9ff000-0xfc9fffff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:03:47:f0:c2:ef
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 7 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 9 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2
uhub2: 4 ports with 4 removable, self powered
ums0: Microsoft Microsoft IntelliMouse® Explorer, rev 1.10/1.14, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
uhub3: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 4
uhub3: 2 ports with 2 removable, bus powered
pcm0: <Intel ICH2 (82801BA)> port 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0
pcm0: <Analog Devices AD1885 AC97 Codec>
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xd0800-0xd17ff,0xcf800-0xd07ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1095816271 Hz quality 800
Timecounters tick every 1.000 msec
GEOM: create disk ad0 dp=0xc2e0a770
ad0: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata0-master UDMA100
acd0: CDROM <SONY CDU4811> at ata1-master PIO4
pcm0: measured ac97 link rate at 55942 Hz
Mounting root from ufs:/dev/ad0s2a
Warning: pid 557 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 563 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 564 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 584 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 585 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 586 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 587 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 590 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 589 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 594 used static ldt allocation.
See the i386_set_ldt man page for more info
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: signature
Url : http://lists.freebsd.org/pipermail/freebsd-current/attachments/20031106/7d627fc1/attachment-0001.bin
More information about the freebsd-current
mailing list