ata and mfs problems
Sven Esbjerg
esbjerg at xbsd.net
Sat Nov 1 12:48:37 PST 2003
On my Fujitsu-Siemens S-4572 I get random hangs when doing recursive copying
to af mfs device. I suspect it has something to do with the fact the I still
get a lot of spurious interrupst on the ata controller.
I'm doing the following:
dd if=/dev/zero of=mfsroot bs=1k count=25000
mdconfig -a -t vnode -f mfsroot -u0
disklabel -r -w md0 auto
newfs /dev/md0c
mkdir -p /mnt/mfs
mount /dev/md0 /mnt/mfs
cp -R /some/dir /mnt/mfs
The laptop will keep working for a while and the things will start to hang.
If I try to reboot it will only hang more. I'm unable to get into the
debugger - all I get to see is:
ata1: spurious interrupt - status = 0xff error = 0xff
Only thing I can do is turn it off :(
Attached is the verbose dmesg.
Sven Esbjerg
--
http://www.usenet.dk/netikette - på forhånd tak.
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #5: Sat Nov 1 17:31:41 CET 2003
root at blade:/usr/src/sys/i386/compile/BLADE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0881000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0881244.
Calibrating clock(s) ... i8254 clock: 1193136 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 746339075 Hz
CPU: Intel Pentium III (746.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000000fb41fff, 250724352 bytes (61212 pages)
0x000000000fff2000 - 0x000000000fff7fff, 24576 bytes (6 pages)
avail memory = 251039744 (239 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6380
bios32: Entry = 0xfd8b0 (c00fd8b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd8b0+0x11e
pnpbios: Found PnP BIOS data at 0xc00f63d0
pnpbios: Entry = f0000:908b Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ THYME > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=71948086)
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fdf70
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 0 B 0x61 3 4 5 7 9 10 11 14
embedded 0 7 D 0x63 3 4 5 7 10 11 14 15
embedded 0 20 A 0x62 3 4 5 7 9 10 11 14
embedded 0 19 A 0x60 3 4 5 7 9 10 11 14
embedded 0 19 B 0x61 3 4 5 7 9 10 11 14
embedded 0 18 A 0x62 3 4 5 7 9 10 11 14
embedded 0 18 B 0x63 3 4 5 7 9 10 11 14
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 19 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 19 func 1
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xff08-0xff0b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.EIO_.LNKB irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.0.1
\\_SB_.PCI0.EIO_.LNKD irq 15: [ 3 4 5 7 10 11 15] low,level,sharable 0.7.3
\\_SB_.PCI0.EIO_.LNKC irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.20.0
\\_SB_.PCI0.EIO_.LNKA irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.19.0
\\_SB_.PCI0.EIO_.LNKB irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.19.1
\\_SB_.PCI0.EIO_.LNKC irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.18.0
\\_SB_.PCI0.EIO_.LNKD irq 15: [ 3 4 5 7 10 11 15] low,level,sharable 0.18.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.EIO_.LNKB irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.0.1
\\_SB_.PCI0.EIO_.LNKD irq 15: [ 3 4 5 7 10 11 15] low,level,sharable 0.7.3
\\_SB_.PCI0.EIO_.LNKC irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.20.0
\\_SB_.PCI0.EIO_.LNKA irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.19.0
\\_SB_.PCI0.EIO_.LNKB irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.19.1
\\_SB_.PCI0.EIO_.LNKC irq 9: [ 3 4 5 7 9 10 11] low,level,sharable 0.18.0
\\_SB_.PCI0.EIO_.LNKD irq 15: [ 3 4 5 7 10 11 15] low,level,sharable 0.18.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7194, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 4, range 32, base 00001cc0, size 6, enabled
pcib0: matched entry for 0.0.INTB (source \\_SB_.PCI0.EIO_.LNKB)
pcib0: slot 0 INTB is routed to irq 9
found-> vendor=0x8086, dev=0x7195, revid=0x00
bus=0, slot=0, func=1
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 4, range 32, base 00001c00, size 7, enabled
pcib0: matched entry for 0.0.INTB (source \\_SB_.PCI0.EIO_.LNKB)
pcib0: slot 0 INTB is routed to irq 9
found-> vendor=0x8086, dev=0x7196, revid=0x00
bus=0, slot=0, func=2
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
found-> vendor=0x8086, dev=0x7198, revid=0x01
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001c90, size 4, enabled
found-> vendor=0x8086, dev=0x7199, revid=0x00
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001ca0, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.PCI0.EIO_.LNKD)
pcib0: slot 7 INTD is routed to irq 15
found-> vendor=0x8086, dev=0x719a, revid=0x00
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=15
map[90]: type 4, range 32, base 0000ff80, size 4, enabled
found-> vendor=0x8086, dev=0x719b, revid=0x00
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x000b, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fc020000, size 12, enabled
map[14]: type 4, range 32, base 00002000, size 6, enabled
map[18]: type 1, range 32, base fc000000, size 17, enabled
pcib0: matched entry for 0.18.INTA (source \\_SB_.PCI0.EIO_.LNKC)
pcib0: slot 18 INTA is routed to irq 9
found-> vendor=0x8086, dev=0x1229, revid=0x09
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pcib0: matched entry for 0.19.INTA (source \\_SB_.PCI0.EIO_.LNKA)
pcib0: slot 19 INTA is routed to irq 9
found-> vendor=0x1217, dev=0x6933, revid=0x02
bus=0, slot=19, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pcib0: matched entry for 0.19.INTB (source \\_SB_.PCI0.EIO_.LNKB)
pcib0: slot 19 INTB is routed to irq 9
found-> vendor=0x1217, dev=0x6933, revid=0x02
bus=0, slot=19, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 4, range 32, base 00001800, size 8, enabled
map[18]: type 1, range 32, base fc021000, size 12, enabled
pcib0: matched entry for 0.20.INTA (source \\_SB_.PCI0.EIO_.LNKC)
pcib0: slot 20 INTA is routed to irq 9
found-> vendor=0x1002, dev=0x4c52, revid=0x64
bus=0, slot=20, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
pcm0: <Intel 443MX> port 0x1cc0-0x1cff,0x1000-0x10ff irq 9 at device 0.1 on pci0
pcm0: <Yamaha YMF743 AC97 Codec (id = 0x594d4800)>
pcm0: Codec features 18 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features AMAP
pcm0: sndbuf_setmap 1d8000, 4000; 0xce71f000 -> 1d8000
pcm0: sndbuf_setmap 200000, 4000; 0xce723000 -> 200000
pci0: <simple comms> at device 0.2 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1c90-0x1c9f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-slave: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x2000-0x203f mem 0xfc000000-0xfc01ffff,0xfc020000-0xfc020fff irq 9 at device 18.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:e0:00:3f:23:34
fxp0: PCI IDs: 8086 1229 10cf 1070 0009
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
cbb0: <O2Micro OZ6933 PCI-CardBus Bridge> irq 9 at device 19.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x69331217 0x04100007 0x06070002 0x00822000
0x10: 0x88000000 0x020000a0 0x20010100 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x04000109
0x40: 0x10e610cf 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x0c0023bf 0x824203ea 0x10500000 0x00000000
0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <O2Micro OZ6933 PCI-CardBus Bridge> irq 9 at device 19.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x69331217 0x04100007 0x06070002 0x00822000
0x10: 0x88001000 0x020000a0 0x20020200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x04000209
0x40: 0x10e610cf 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x0c0023bf 0x824203ea 0x10500000 0x00000000
0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <display, VGA> at device 20.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: <Embedded Controller: GPE 0x2c> port 0x66,0x62 on acpi0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 55 86
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 55 86
b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 746339075 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_cmbat1: battery initialization done, tried 1 times
pccard0: CIS version unknown (major=1, minor=0)
pccard0: CIS info: The Linksys Group, Inc., Instant Wireless Network PC Card, ISL37300P, RevA
pccard0: Manufacturer code 0x274, product 0x1612
pccard0: function 0: network adapter, ccr addr 3e0 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqshare irqpulse irqlevel
wi0: <The Linksys Group, Inc. Instant Wireless Network PC Card> at port 0x100-0x13f irq 9 function 0 config 1 on pccard0
wi0: 802.11 address: 00:06:25:29:75:dd
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2)
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ad0: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc2de2270
ad0: <TOSHIBA MK1016GAP/U1.11 A> ATA-5 disk at ata0-master
ad0: 9590MB (19640880 sectors), 19485 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
pcm0: measured ac97 link rate at 48019 Hz, will use 48000 Hz
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:19640817
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 10056098304 end 10056130559
GEOM: Configure ad0s1a, start 0 length 524288000 end 524287999
GEOM: Configure ad0s1b, start 524288000 length 524288000 end 1048575999
GEOM: Configure ad0s1c, start 0 length 10056098304 end 10056098303
GEOM: Configure ad0s1d, start 1048576000 length 6442450944 end 7491026943
GEOM: Configure ad0s1e, start 7491026944 length 1073741824 end 8564768767
GEOM: Configure ad0s1f, start 8564768768 length 524288000 end 9089056767
GEOM: Configure ad0s1g, start 9089056768 length 967041536 end 10056098303
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
uhci0: <Intel 82443MX USB controller> port 0x1ca0-0x1cbf irq 15 at device 7.2 on pci0
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
splash: image decoder found: blank_saver
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
uhub1: Texas Instruments General Purpose USB Hub, class 9/0, rev 1.10/1.01, addr 2
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
uhub1: 2 ports with 2 removable, self powered
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
ata1: spurious interrupt - status=0xff error=0xff
Linux ELF exec handler installed
pflog0: bpf attached
pflog: $Name: VERSION_1_66 $
pfsync0: bpf attached
pfsync: $Name: VERSION_1_66 $
in6_ifattach: pflog0 is not multicast capable, IPv6 not enabled
in6_ifattach: pfsync0 is not multicast capable, IPv6 not enabled
pflog0: promiscuous mode enabled
pf: $Name: VERSION_1_66 $
lock order reversal
1st 0xc32ce090 rtentry (rtentry) @ net/route.c:182
2nd 0xc2dc847c radix node head (radix node head) @ net/route.c:544
Stack backtrace:
More information about the freebsd-current
mailing list