SATA disks on 5.2-CURRENT
Edwin Culp
edwinlculp at yahoo.com
Mon Dec 29 04:41:47 PST 2003
--- Jamie Clark <jclark at metaparadigm.com> wrote:
> Tatsumi Hosokawa wrote:
>
> >atapci2 at pci0:31:2: class=0x01018f
> card=0x24d11458 chip=0x24d18086 rev=0x02
> >hdr=0x00
> > vendor = 'Intel Corporation'
> > device = '82801EB (ICH5) SATA Controller'
> > class = mass storage
> > subclass = ATA
> >
> >Disks sometimes work, and sometimes don't work, and
> sometimes the
> >system hangs in boot process (these disks work fine
> on 4.9-RELEASE).
> >
> >
> FWIW (if a 'me too' is worth anything) I have
> exactly the same problem
> with my Intel 865PERL mainboard. Same error messages
> as below, almost
> always hangs on boot. Last tested with -CURRENT
> around 26 Dec.
> My reason for using the SATA channels was because I
> had already fully
> populated PATA - so using legacy mode was not an
> option. The SATA did
> work ok in Windows.
>
> Solution was found in a 3ware controller.
I would like to interpret the above. Does this mean
that the 8500 series of SATA controlers from 3ware
work under current as is?
Thanks,
ed
>
> I'd be happy to re-connect and collect some further
> verbose messages if
> anyone's interested.
>
> -Jamie
>
> >Error messages:
> >
> > Case 1:
> > Dec 7 21:52:02 nekodaisuki kernel: ad4: FAILURE
> - READ_DMA status=51<READY,DSC,ERROR>
> error=40<UNCORRECTABLE>
> > Dec 7 21:52:02 nekodaisuki kernel: ad6: FAILURE
> - READ_DMA status=51<READY,DSC,ERROR>
> error=10<NID_NOT_FOUND>
> >
> > Case 2:
> > Dec 8 00:27:48 nekodaisuki kernel: ad4: WARNING
> - READ_DMA recovered from missing interrupt
> > Dec 8 00:27:48 nekodaisuki kernel: ad4: FAILURE
> - READ_DMA
>
status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR>
> error=0
> > Dec 8 00:27:48 nekodaisuki kernel: ad4: timeout
> sending command=c8
> > Dec 8 00:27:48 nekodaisuki kernel: ad4: error
> issuing DMA command
> > Dec 8 00:27:48 nekodaisuki kernel: ad4: WARNING
> - READ_DMA recovered from missing interrupt
> > Dec 8 00:27:48 nekodaisuki kernel: ad4: FAILURE
> - READ_DMA
>
status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR>
> error=0
> >
> >
> >
>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
>
http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to
"freebsd-current-unsubscribe at freebsd.org"
__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/
More information about the freebsd-current
mailing list