SATA disks on 5.2-CURRENT

[Jamie Clark]

Tatsumi Hosokawa wrote:

>atapci2 at pci0:31:2:      class=0x01018f card=0x24d11458 chip=0x24d18086 rev=0x02
>hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801EB (ICH5) SATA Controller'
>    class    = mass storage
>    subclass = ATA
>
>Disks sometimes work, and sometimes don't work, and sometimes the
>system hangs in boot process (these disks work fine on 4.9-RELEASE).
>  
>
FWIW (if a 'me too' is worth anything) I have exactly the same problem 
with my Intel 865PERL mainboard. Same error messages as below, almost 
always hangs on boot. Last tested with -CURRENT around 26 Dec.
My reason for using the SATA channels was because I had already fully 
populated PATA - so using legacy mode was not an option. The SATA did 
work ok in Windows.

Solution was found in a 3ware controller.

I'd be happy to re-connect and collect some further verbose messages if 
anyone's interested.

-Jamie

>Error messages:
>
> Case 1:
>  Dec  7 21:52:02 nekodaisuki kernel: ad4: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=40<UNCORRECTABLE>
>  Dec  7 21:52:02 nekodaisuki kernel: ad6: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND>
>
> Case 2:
>  Dec  8 00:27:48 nekodaisuki kernel: ad4: WARNING - READ_DMA recovered from missing interrupt
>  Dec  8 00:27:48 nekodaisuki kernel: ad4: FAILURE - READ_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0
>  Dec  8 00:27:48 nekodaisuki kernel: ad4: timeout sending command=c8
>  Dec  8 00:27:48 nekodaisuki kernel: ad4: error issuing DMA command
>  Dec  8 00:27:48 nekodaisuki kernel: ad4: WARNING - READ_DMA recovered from missing interrupt
>  Dec  8 00:27:48 nekodaisuki kernel: ad4: FAILURE - READ_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0
>
>  
>