Cdrecord broken with 5.2Beta and ATAPICAM
slave-mike
slave-mike at slavepix.com
Fri Dec 12 22:32:54 PST 2003
Nakata Maho wrote:
> Hi, Martin
>
>
>>Since the ATAnG commit I'm no longer able to burn any
>>Cd's. 5.X, 5.1R did work.
>
> Yes. me too.
>
>
>>Writing pregap for track 1 at -150
>>cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
>>write track pad data: error after 0 bytes
>>CDB: 2A 00 FF FF FF 6A 00 00 1F 00
>>BFree: 1568 K BSize: 1568 K
>>status: 0x2 (CHECK CONDITION)
>
> ^^^^^^^^same error
>
>
>>Starting new track at sector: 0
>>Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>00 00 00 00 00 00 00 00 00 00
>>Sense Key: 0xFFFFFFFF [], Segment 0
>>Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
>>Sense flags: Blk 0 (not valid)
>>cmd finished after 1.675s timeout 200s
>>cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
>>CDB: 2A 00 00 00 00 00 00 00 1F 00
>>status: 0x2 (CHECK CONDITION)
>>Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>00 00 00 00 00 00 00 00 00 00
>>Sense Key: 0xFFFFFFFF [], Segment 0
>>Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
>>Sense flags: Blk 0 (not valid)
>>cmd finished after 0.192s timeout 200s
>
>
> My log is following:
>
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Using libscg version 'schily-0.7'
> atapi: 0
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'PIONEER '
> Identifikation : 'DVD-RW DVR-106D'
> Revision : '1.07'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
> cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1267712 = 1238 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 41 MB padsize: 30 KB
> Total size: 47 MB (04:42.44) = 21183 sectors
> Lout start: 47 MB (04:44/33) = 21183 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 4
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type B, low Beta category (B-) (4)
> ATIP start of lead in: -11746 (97:25/29)
> ATIP start of lead out: 359849 (79:59/74)
> Disk type: Short strategy type (Phthalocyanine or similar)
> Manuf. index: 8
> Manufacturer: Hitachi Maxell, Ltd.
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 338666
> Starting to write CD/DVD at speed 8 in dummy SAO mode for single session.
> Last chance to quit, starting dummy write 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is OFF.
> Sending CUE sheet...
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
> Track 01: 0 of 41 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB: 2A 00 00 00 01 17 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 200s
>
> write track data: error after 571392 bytes
> Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00
> Writing time: 5.260s
> Average write speed 55.5x.
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time: 18.870s
> cdrecord: fifo had 73 puts and 10 gets.
> cdrecord: fifo was 0 times empty and 2 times full, min fill was 92%.
>
> --maho
>
>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
add -force flag and you can burn in spite of the ataNG problem with atapicam
--
http://slavepix.com/
More information about the freebsd-current
mailing list