Cdrecord broken with 5.2Beta and ATAPICAM
Nakata Maho
chat95 at mbox.kyoto-inet.or.jp
Fri Dec 12 07:30:53 PST 2003
Hi, Martin
> Since the ATAnG commit I'm no longer able to burn any
> Cd's. 5.X, 5.1R did work.
Yes. me too.
> Writing pregap for track 1 at -150
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> write track pad data: error after 0 bytes
> CDB: 2A 00 FF FF FF 6A 00 00 1F 00
> BFree: 1568 K BSize: 1568 K
> status: 0x2 (CHECK CONDITION)
^^^^^^^^same error
> Starting new track at sector: 0
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 1.675s timeout 200s
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB: 2A 00 00 00 00 00 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.192s timeout 200s
My log is following:
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.7'
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-106D'
Revision : '1.07'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1267712 = 1238 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 41 MB padsize: 30 KB
Total size: 47 MB (04:42.44) = 21183 sectors
Lout start: 47 MB (04:44/33) = 21183 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11746 (97:25/29)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 8
Manufacturer: Hitachi Maxell, Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 338666
Starting to write CD/DVD at speed 8 in dummy SAO mode for single session.
Last chance to quit, starting dummy write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 41 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 01 17 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
write track data: error after 571392 bytes
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00
Writing time: 5.260s
Average write speed 55.5x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 18.870s
cdrecord: fifo had 73 puts and 10 gets.
cdrecord: fifo was 0 times empty and 2 times full, min fill was 92%.
--maho
More information about the freebsd-current
mailing list