TESTERS WANTED for ATAng preview 2
Jason Stone
freebsd-current at dfmm.org
Mon Aug 18 17:28:49 PDT 2003
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> > Grap the latest from ftp.deepcore.dk/pub/ATAng and apply the diff files
> > to your src tree, remove the contents of sys/dev/ata and extract the
> > ATAng-*tgz file there, then do the usual drill to get a new kernel...
Tried to grab this last night, but got "550 conf-patch: Permission denied."
when trying to retrieve conf-patch.
> current driver from cvs doesn't find any disk -- when try to mount root
> :(
I'm also having a problem with the -current ata driver. I have an smp
system with an offboard promise ide card, and when I build an smp kernel,
the ide drives do not get detected. If I take smp out of the kernel
though, the drives get detected fine. Anyone know why this might be?
dmesg's are below as a unified diff between the non-smp kernel and the smp
kernel.
-Jason
--------------------------------------------------------------------------
Freud himself was a bit of a cold fish, and one cannot avoid the suspicion
that he was insufficiently fondled when he was an infant.
-- Ashley Montagu
- --- dmesg.up Sat Aug 9 01:38:11 2003
+++ dmesg.smp Fri Aug 8 05:11:04 2003
@@ -1,99 +1,107 @@
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
- -FreeBSD 5.1-CURRENT #0: Fri Aug 8 03:06:30 PDT 2003
+FreeBSD 5.1-CURRENT #1: Fri Aug 8 04:15:59 PDT 2003
root at moonchild.fantastica:/usr/obj/usr/src/sys/JKERN
- -Preloaded elf kernel "/boot/kernel/kernel" at 0xc052c000.
+Preloaded elf kernel "/boot/kernel/kernel" at 0xc0546000.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (256 MB)
- -avail memory = 255090688 (243 MB)
+avail memory = 254971904 (243 MB)
+Programming 24 pins in IOAPIC #0
+IOAPIC #0 intpin 2 -> irq 0
+IOAPIC #0 intpin 16 -> irq 10
+IOAPIC #0 intpin 17 -> irq 11
+IOAPIC #0 intpin 19 -> irq 9
+FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
+ cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
+ cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
+ io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef40-0xef5f irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uscanner0: Hewlett-Packard HP ScanJet 5200C, rev 1.00/1.00, addr 2
- -pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
+piix0 port 0x440-0x44f at device 7.3 on pci0
+Timecounter "PIIX" frequency 3579545 Hz
atapci1: <Promise PDC20262 UDMA66 controller> port 0xef00-0xef3f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 mem 0xfebc0000-0xfebdffff irq 11 at device 13.0 on pci0
ata2: at 0xefe0 on atapci1
ata3: at 0xefa0 on atapci1
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 10 at device 15.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pcm0: <Creative EMU10K1> port 0xef80-0xef9f irq 11 at device 16.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
dc0: <82c169 PNIC 10/100BaseTX> port 0xe400-0xe4ff mem 0xfebfef00-0xfebfefff irq 11 at device 18.0 on pci0
dc0: Ethernet address: 00:a0:cc:40:8e:3e
miibus0: <MII bus> on dc0
bmtphy0: <BCM5201 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, video> at device 20.0 (no driver attached)
pci0: <multimedia> at device 20.1 (no driver attached)
orm0: <Option ROMs> at iomem 0xd0800-0xd1fff,0xcc000-0xd07ff,0xc0000-0xca7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5L/0101.03> HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
- -Timecounter "TSC" frequency 350797334 Hz
+APIC_IO: Testing 8254 interrupt delivery
+APIC_IO: routing 8254 via IOAPIC #0 intpin 2
+Timecounter "TSC" frequency 350796749 Hz
Timecounters tick every 10.000 msec
- -ad4: 57241MB <ST360021A> [116301/16/63] at ata2-master UDMA66
- -ad6: 25965MB <Maxtor 92720U8> [52755/16/63] at ata3-master UDMA66
+ata2-master: timeout waiting for interrupt
+ata2-master: ATA identify failed
+ata3-master: timeout waiting for interrupt
+ata3-master: ATA identify failed
acd0: CD-RW <CR-4804TE> at ata0-master PIO3
Waiting 5 seconds for SCSI devices to settle
+SMP: AP CPU #1 Launched!
da0 at ahc0 bus 0 target 2 lun 0
da0: <IBM DNES-309170W SAH0> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
Mounting root from ufs:/dev/da0s1a
- -dc0: failed to force tx and rx to idle state
- -dc0: failed to force tx and rx to idle state
- -Accounting enabled
- -cd0 at ahc0 bus 0 target 3 lun 0
- -cd0: <PLEXTOR CD-ROM PX-32TS 1.03> Removable CD-ROM SCSI-2 device
- -cd0: 20.000MB/s transfers (20.000MHz, offset 15)
- -cd0: Attempt to query device size failed: NOT READY, Medium not present
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)
Comment: See https://private.idealab.com/public/jason/jason.gpg
iD8DBQE/QW9AswXMWWtptckRAknOAKDp694qes5FUSOZsJXyICxXKE9eEgCgvyXy
sNpWuOzekc3a2wEFBhnM56c=
=LTUn
-----END PGP SIGNATURE-----
More information about the freebsd-current
mailing list