8.0-RC USB/FS problem
gjin at ubicom.com
Sun Nov 22 05:45:35 UTC 2009
Tried on the USB hard drive:
Deleted slice 3 and recreated slice 3 with two partitions s3d and s3e.
Was happy because successfully did dump/restore on s3d, and thought it just partition format issue;
but system crashed during dump/restore on s3e, and partition lost the file system type.
wolf# mount /dev/da0s3e /mnt
WARNING: /mnt was not properly dismounted
/mnt: mount pending error: blocks 35968 files 0
wolf# fsck da0s3e
fsck: Could not determine filesystem type
wolf# bsdlabel da0s3
# size offset fstype [fsize bsize bps/cpg]
c: 175735035 0 unused 0 0 # "raw" part, don't edi
d: 18874368 0 4.2BSD 0 0 0
e: 156860667 18874368 4.2BSD 0 0 0
Therefore, tried directly use fsck_ufs on both USB hard drive and USB stick to get file system
clean up. All data got back now.
The machine has run with FreeBSD 6.1 all the way to 7.2 without such problem.
How can we determine what could go wrong in 8.0? FS or USB.
By the way, IDE to IDE dump/restore seems not having such problem at this point, although
one of IDE drive experienced partition recognizing problem, which went away after deleting
slices and recreating slices.
From: Guojun Jin
Sent: Sat 11/21/2009 7:40 PM
To: Hans Petter Selasky; freebsd-usb at freebsd.org
Cc: freebsd-stable at freebsd.org; questions at freebsd.org
Subject: 8.0-RC USB problem -- how to recover a damaged USB stick
It seems this is more serious problem in 8.0, and I hope it could be resolved before a formal release. I can help to diagnose this if people need more information (this is destructive).
I have picked a USB stick (DataTraveler 2GB), that has two partitions s0 for DOS and s1 for FreeBSD.
Both USB hard drive and the USB stick have worked under FreeBSD 6.2, 6.3, 6.4 and 7.2 for a few years without any problem.
Plugged USB stick in 8.0-RC and mounted it on /mnt; then
untar a file, tarred one day ago from FreeBSD 6.3 machine onto stick,to a IDE drive then tar it
back to the USB stick.
During tar writting from IDE to USB stick, did "ls /mnt", and "tar" paused and "ls" hangs.
A couple of minutes later, ls comes back, but tar still pauses.
Hit ^C on tar process around 14:30, it took another minutes to stop the process. Tried tar again,
and system disallowed to write on the USB stick. "ls" shows all file still there (probably cached inods).
Went out for a few hours, and came back found /var/log/message are flooded with following message:
-rw-r--r-- 1 root wheel 167181 Nov 21 19:02 messages
-rw-r--r-- 1 root wheel 7390 Nov 21 18:00 messages.0.bz2
-rw-r--r-- 1 root wheel 7509 Nov 21 17:00 messages.1.bz2
-rw-r--r-- 1 root wheel 9365 Nov 21 16:00 messages.2.bz2
-rw-r--r-- 1 root wheel 20598 Nov 21 15:00 messages.3.bz2
Nov 21 18:00:00 wolf newsyslog: logfile turned over due to size>384K
Nov 21 18:00:27 wolf kernel: g_vfs_done():da0s2[WRITE(offset=625688576, length=1
31072)]error = 5
Nov 21 18:00:27 wolf kernel: g_vfs_done():da0s2[WRITE(offset=625819648, length=1
31072)]error = 5
Nov 21 18:19:03 wolf kernel: g_vfs_done():da0s2[WRITE(offset=524451840, length=1
6384)]error = 5
Nov 21 18:19:33 wolf kernel: g_vfs_done():da0s2[WRITE(offset=5586944, length=204
8)]error = 5
Nov 21 18:19:33 wolf kernel: g_vfs_done():da0s2[WRITE(offset=65536, length=2048)
]error = 5
Nov 21 18:19:33 wolf kernel: g_vfs_done():da0s2[WRITE(offset=114688, length=1638
4)]error = 5
Nov 21 18:20:05 wolf kernel: g_vfs_done():da0s2[WRITE(offset=349700096, length=1
and has to reboot the system, and reboot was not able to umount everything (boot up message):
Nov 21 18:24:03 wolf kernel: da0: <Kingston DataTraveler 2.0 1.00> Removable Dir
ect Access SCSI-2 device
Nov 21 18:24:03 wolf kernel: da0: 40.000MB/s transfers
Nov 21 18:24:03 wolf kernel: da0: 1947MB (3987456 512 byte sectors: 255H 63S/T 2
Nov 21 18:24:03 wolf kernel: WARNING: / was not properly dismounted
Nov 21 18:24:03 wolf kernel: WARNING: /data was not properly dismounted
Nov 21 18:24:03 wolf kernel: WARNING: /home was not properly dismounted
Nov 21 18:24:03 wolf kernel: WARNING: /tmp was not properly dismounted
Nov 21 18:24:03 wolf kernel: WARNING: /usr was not properly dismounted
# mount /dev/da0s2 /mnt
mount: /dev/da0s2 : Operation not permitted
The USB stick cannot be mount under any FreeBSD OS now, and everything on the drive has lost.
Does anyone know if it is possible to revocer such damaged USB stick?
From: Hans Petter Selasky [mailto:hselasky at c2i.net]
Sent: Wed 11/18/2009 3:13 AM
To: freebsd-usb at freebsd.org
Cc: Guojun Jin; freebsd-stable at freebsd.org; questions at freebsd.org
Subject: Re: 8.0-RC3 USB lock up on mounting two partitions from one USB drive
I'm not sure if this is an USB issue or not. If you get READ/WRITE errors and
the drive simply dies then it might be the case. Else it is a system issue.
There are quirks for mass storage which you can add to
On Wednesday 18 November 2009 08:33:07 Guojun Jin wrote:
> Did newfs on those partition and made things worsen -- restore completely
> fails: (I had experienced another similar problem on an IDE, which works
> well for 6.4 and 7.2, but 8.0.) This dirve works fine under FreeBSD 6.4.
> Is something new in 8.0 making disk partition schema changed?
> g_vfs_done():da0s3d[READ(offset=98304, length=16384)]error = 6
> g_vfs_done():da0s3d[WRITE(offset=192806912, length=16384)]error = 6
> fopen: Device not configured
> cannot create save file ./restoresymtable for symbol table
> abort? [yn] (da0:umass-sim0:0:0:0): Synchronize cache failed, status ==
> 0xa, scs i status == 0x0
> (da0:umass-sim0:0:0:0): removing device entry
> ugen1.2: <DMI> at usbus1
> umass0: <DMI Ultra HDD, class 0/0, rev 2.00/1.19, addr 2> on usbus1
> umass0: SCSI over Bulk-Only; quirks = 0x0000
> umass0:0:0:-1: Attached to scbus0
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <DMI Ultra HDD 1.19> Fixed Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
> Device da0s3d went missing before all of the data could be written to it;
> expect data loss.
> 99 23:19 sysinstall
> 100 23:20 newfs /dev/da0s3d
> 101 23:20 newfs /dev/da0s3e
> 102 23:21 mount /dev/da0s3d /mnt
> 103 23:21 cd /mnt
> 104 23:21 dump -0f - /home | restore -rf -
> 105 23:27 history 15
> -----Original Message-----
> From: Guojun Jin
> Sent: Tue 11/17/2009 11:05 PM
> To: freebsd-stable at freebsd.org
> Cc: questions at freebsd.org; freebsd-usb at freebsd.org
> Subject: 8.0-RC3 USB lock up on mounting two partitions from one USB drive
> When mounting two partitions from a USB dirve, it can cause the drive
> access lock up for a long time. Details:
> Terminal 1 --
> term1# mount /dev/da0s3d /mnt
> term1# cd /mnt ; rm -fr *
> when rm starts, go to terminal 2 and do:
> term2# mount /dev/da0s3e /dist ### this will hanging for a long time and
> USB hard drive activity light is off. After more than 1-2 minutes, mount
> returns, and the drive activity light is blinking, thus removing is going
> term2# ls /dist ### this will cause dUSB dirve hanging again -- no
> avtivity. Similarly, ls will finish in a couple of miniutes or longer, the
> rm command continues; but for a while, the drive activity will stop again.
> Reboot machine, repeat the above steps, and result will be the same. Reboot
> machine again, and just mount one partition, then doing "rm -rf *" without
> involve the second partition, rm will finish quickly.
> Has anyone obseved this behave on 8.0-RC?
More information about the freebsd-bugs