kern/141826: load of snd_hda module fails

Karl Higgins kahjs2007 at yahoo.com
Mon Dec 21 04:00:18 UTC 2009


>Number:         141826
>Category:       kern
>Synopsis:       load of snd_hda module fails
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Dec 21 04:00:17 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator:     Karl Higgins
>Release:        FreeBSD 8.0-RELEASE #0
>Organization:
>Environment:
FreeBSD nomad 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009     root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  amd64
>Description:
snd_hda module fails:

$ kldstat
Id Refs Address            Size     Name
 1   23 0xffffffff80100000 d17dc0   kernel
 2    1 0xffffffff80e18000 18fb40   zfs.ko
 3    2 0xffffffff80fa8000 3868     opensolaris.ko
 4    1 0xffffffff80fac000 23ed0    snd_hda.ko
 5    2 0xffffffff80fd0000 75708    sound.ko
 6    1 0xffffffff81046000 41e88    vboxdrv.ko
 7    1 0xffffffff81223000 a3b8     geom_eli.ko
 8    1 0xffffffff8122e000 1abb2    crypto.ko
 9    1 0xffffffff81249000 a4b2     zlib.ko
$


$ cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
$


>How-To-Repeat:
$ cat /boot/loader.conf
snd_hda_load="YES"
vboxdrv_load="YES"
zfs_load="YES"

or

unloadkld snd_hda
loadkld snd_hda


>Fix:


Patch attached with submission follows:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009
    root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81089000.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff810891f8.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff810898a0.
Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff81089ed0.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff8108a4f8.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff8108aba0.
Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff8108ac00.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2293846712 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-66 (2293.85-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60f81  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 3221225472 (3072 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x00000000010b9000 - 0x00000000b2858fff, 2977562624 bytes (726944 pages)
avail memory = 2960560128 (2823 MB)
ACPI APIC Table: <HP     	 APIC  >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf8940 00014 (v0 HP    )
ACPI: RSDT 0xb7f0adb5 00040 (v1 HPQOEM SLIC-MPC 06040000  LTP 00000000)
ACPI: FACP 0xb7f13a92 00074 (v1 HP     MCP51M   06040000 PTL_ 000F4240)
ACPI: DSDT 0xb7f0adf5 08C9D (v1 HP       MCP51M 06040000 MSFT 03000000)
ACPI: FACS 0xb7f14fc0 00040
ACPI: SSDT 0xb7f13b06 0028A (v1 HP     POWERNOW 06040000  LTP 00000001)
ACPI: MCFG 0xb7f13d90 0003C (v1 HP       MCFG   06040000  LTP 00000000)
ACPI: HPET 0xb7f13dcc 00038 (v1 PTLTD  HPETTBL  06040000  LTP 00000001)
ACPI: APIC 0xb7f13e04 0005E (v1 HP     	 APIC   06040000  LTP 00000000)
ACPI: BOOT 0xb7f13e62 00028 (v1     HP $SBFTBL$ 06040000  LTP 00000001)
ACPI: SLIC 0xb7f13e8a 00176 (v1 HPQOEM SLIC-MPC 06040000  LTP 00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <HPQOEM SLIC-MPC> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff8000009000 pa 0x4000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P44_ -> bus 0 dev 10 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P60_ -> bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P64_ -> bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P68_ -> bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA2 -> bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P74_ -> bus 0 dev 10 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.XVR2.PCE1 -> bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 10 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11 14 15
  Validation          0  255   N     0  5 7 10 11 14 15
  After Disable       0  255   N     0  5 7 10 11 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  5 7 10 11 14 15
  Validation          0   10   N     0  5 7 10 11 14 15
  After Disable       0  255   N     0  5 7 10 11 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11 14 15
  Validation          0  255   N     0  5 7 10 11 14 15
  After Disable       0  255   N     0  5 7 10 11 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11 14 15
  Validation          0  255   N     0  5 7 10 11 14 15
  After Disable       0  255   N     0  5 7 10 11 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  19
  Validation          0  255   N     0  19
  After Disable       0  255   N     0  19
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  18
  Validation          0  255   N     0  18
  After Disable       0  255   N     0  18
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 20 22 23
  Validation          0  255   N     0  16 17 20 22 23
  After Disable       0  255   N     0  16 17 20 22 23
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  21
  Validation          0  255   N     0  21
  After Disable       0  255   N     0  21
pci_link18:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  21
  Validation          0  255   N     0  21
  After Disable       0  255   N     0  21
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x10de, dev=0x02f0, revid=0xa2
	domain=0, bus=0, slot=0, func=0
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fa, revid=0xa2
	domain=0, bus=0, slot=0, func=1
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fe, revid=0xa2
	domain=0, bus=0, slot=0, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02f8, revid=0xa2
	domain=0, bus=0, slot=0, func=3
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02f9, revid=0xa2
	domain=0, bus=0, slot=0, func=4
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02ff, revid=0xa2
	domain=0, bus=0, slot=0, func=5
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x027f, revid=0xa2
	domain=0, bus=0, slot=0, func=6
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x027e, revid=0xa2
	domain=0, bus=0, slot=0, func=7
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fc, revid=0xa1
	domain=0, bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x02fd, revid=0xa1
	domain=0, bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x0244, revid=0xa2
	domain=0, bus=0, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xc2000000, size 24, enabled
	map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
	map[1c]: type Memory, range 64, base 0xc1000000, size 24, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.LK3E:0)
pci_link6: Picked IRQ 18 with weight 0
ioapic0: Changing polarity for pin 18 to high
pcib0: slot 5 INTA routed to irq 18 via \\_SB_.PCI0.LK3E
found->	vendor=0x10de, dev=0x0270, revid=0xa2
	domain=0, bus=0, slot=9, func=0
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0260, revid=0xa3
	domain=0, bus=0, slot=10, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0264, revid=0xa3
	domain=0, bus=0, slot=10, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[20]: type I/O Port, range 32, base 0x3040, size  6, enabled
	map[24]: type I/O Port, range 32, base 0x3000, size  6, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LSMB:0)
pci_link8: Picked IRQ 16 with weight 0
ioapic0: Changing polarity for pin 16 to high
pcib0: slot 10 INTA routed to irq 16 via \\_SB_.PCI0.LSMB
found->	vendor=0x10de, dev=0x0271, revid=0xa3
	domain=0, bus=0, slot=10, func=3
	class=0b-40-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=11
	map[10]: type Memory, range 32, base 0xc0040000, size 18, enabled
pcib0: matched entry for 0.10.INTB (src \\_SB_.PCI0.LPMU:0)
pci_link9: Picked IRQ 17 with weight 0
ioapic0: Changing polarity for pin 17 to high
pcib0: slot 10 INTB routed to irq 17 via \\_SB_.PCI0.LPMU
found->	vendor=0x10de, dev=0x026d, revid=0xa3
	domain=0, bus=0, slot=11, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xc0004000, size 12, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LUS0:0)
pci_link10: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 11 INTA routed to irq 20 via \\_SB_.PCI0.LUS0
found->	vendor=0x10de, dev=0x026e, revid=0xa3
	domain=0, bus=0, slot=11, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xc0005000, size  8, enabled
pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LUS2:0)
pci_link11: Picked IRQ 22 with weight 0
ioapic0: Changing polarity for pin 22 to high
pcib0: slot 11 INTB routed to irq 22 via \\_SB_.PCI0.LUS2
found->	vendor=0x10de, dev=0x0265, revid=0xf1
	domain=0, bus=0, slot=13, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type I/O Port, range 32, base 0x3080, size  4, enabled
found->	vendor=0x10de, dev=0x0266, revid=0xf1
	domain=0, bus=0, slot=14, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0x30b0, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x30a4, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x30a8, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x30a0, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x3090, size  4, enabled
	map[24]: type Memory, range 32, base 0xc0006000, size 12, enabled
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.LTID:0)
pci_link17: Picked IRQ 21 with weight 0
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 14 INTA routed to irq 21 via \\_SB_.PCI0.LTID
found->	vendor=0x10de, dev=0x026f, revid=0xa2
	domain=0, bus=0, slot=16, func=0
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x026c, revid=0xa2
	domain=0, bus=0, slot=16, func=1
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit, vector masks
	map[10]: type Memory, range 32, base 0, size 14, memory disabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LAZA:0)
pci_link13: Picked IRQ 23 with weight 0
ioapic0: Changing polarity for pin 23 to high
pcib0: slot 16 INTB routed to irq 23 via \\_SB_.PCI0.LAZA
found->	vendor=0x10de, dev=0x0269, revid=0xa3
	domain=0, bus=0, slot=20, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xc0007000, size 12, enabled
	map[14]: type I/O Port, range 32, base 0x30b8, size  3, enabled
pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.LMAC:0)
pci_link12: Picked IRQ 16 with weight 1
pcib0: slot 20 INTA routed to irq 16 via \\_SB_.PCI0.LMAC
found->	vendor=0x1022, dev=0x1100, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x4000-0x4fff
pcib1:   memory decode     0xc4000000-0xc7ffffff
pcib1:   prefetched decode 0xc9000000-0xc91fffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     3
pcib2:   subordinate bus   3
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xc8000000-0xc8ffffff
pcib2:   prefetched decode 0xc9200000-0xc93fffff
pci3: <ACPI PCI bus> on pcib2
pci3: domain=0, physical bus=3
found->	vendor=0x14e4, dev=0x4328, revid=0x03
	domain=0, bus=3, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xc8000000, size 14, enabled
pcib2: requested memory range 0xc8000000-0xc8003fff: good
	map[18]: type Prefetchable Memory, range 64, base 0xc9200000, size 20, enabled
pcib2: requested memory range 0xc9200000-0xc92fffff: good
pci3: <network> at device 0.0 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1ffffff irq 18 at device 5.0 on pci0
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <processor> at device 10.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc0004000-0xc0004fff irq 20 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0004000
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0005000-0xc00050ff irq 22 at device 11.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xc0005000
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=01 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x30b0-0x30b7,0x30a4-0x30a7,0x30a8-0x30af,0x30a0-0x30a3,0x3090-0x309f mem 0xc0006000-0xc0006fff irq 21 at device 14.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 53
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc0006000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30b0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30a4
ata2: SATA connect time=0ms status=00000113
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30a8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30a0
ata3: SATA connect timeout status=00000000
ata3: [MPSAFE]
ata3: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     7
pcib3:   subordinate bus   7
pcib3:   I/O decode        0xf000-0xfff
pcib3:   no prefetched decode
pcib3:   Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib3
pci7: domain=0, physical bus=7
hdac0: <NVidia MCP51 High Definition Audio Controller> irq 23 at device 16.1 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: Lazy allocation of 0x4000 bytes rid 0x10 type 3 at 0xb7f00000
hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xb7f00000
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54
hdac0: [MPSAFE]
hdac0: [ITHREAD]
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0x30b8-0x30bf mem 0xc0007000-0xc0007fff irq 16 at device 20.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0007000
miibus0: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:1e:68:11:8e:07
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54
nfe0: [MPSAFE]
nfe0: [FILTER]
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
ex_isa_identify()
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xcf800-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 187938 -> 100000
procfs registered
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 13
ZFS storage pool version 13
lapic: Divisor 2, Frequency 99732466 hz
Timecounter "TSC" frequency 2293846712 Hz quality -100
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0xa4 offMax=0x20c
supdrvGipCreate: omni timer not supported, falling back to synchronous mode
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on nForce MCP51 chip
acd0: <TSSTcorpCD/DVDW TS-L632M/0A17> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 238475MB <FUJITSU MHY2250BH 890B> at ata2-master SATA150
ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51
Root mount waiting for: usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
battery0: battery initialization done, tried 1 times
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 8 ports with 8 removable, self powered
ugen1.2: <vendor 0x04b4> at usbus1
uhub2: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2> on usbus1
Root mount waiting for: usbus1
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
ugen1.3: <Sonix Technology Co., Ltd.> at usbus1
ugen1.4: <vendor 0x08ff> at usbus1
Root mount waiting for: usbus1
ugen1.5: <eGalax INC.> at usbus1
ums0: <eGalax INC. USB TouchController, class 0/0, rev 1.10/1.00, addr 5> on usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
ums0: error reading report description
device_attach: ums0 attach returned 12
ums0: <eGalax INC. USB TouchController, class 0/0, rev 1.10/1.00, addr 5> on usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
ums0: error reading report description
device_attach: ums0 attach returned 12
Trying to mount root from ufs:/dev/ad4s1a
ct_to_ts([2009-12-20 21:15:55]) = 1261343755.000000000
start_init: trying /sbin/init
ugen0.2: <Broadcom Corp> at usbus0
crypto: <crypto core>
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
GEOM_ELI: Device ad4s1g.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI:     Crypto: software
GEOM_ELI: Device ad4s1b.eli created.
GEOM_ELI: Encryption: AES-CBC 256
GEOM_ELI:     Crypto: software
system power profile changed to 'economy'
acpi_acad0: Off Line
nfe0: link state changed to UP
system power profile changed to 'performance'
acpi_acad0: On Line


>Release-Note:
>Audit-Trail:
>Unformatted:


More information about the freebsd-bugs mailing list