kern/53566: IBM Eserver (245 || 345) + ServeRaid 5i ips driver panic

[Jack Patton]

The following reply was made to PR kern/53566; it has been noted by GNATS.

From: Jack Patton <jackp at flag.60north.net>
To: <jackp at flag.60north.net>, <FreeBSD-gnats-submit at freebsd.org>,
	<freebsd-bugs at freebsd.org>, <freebsd-scsi at freebsd.org>
Cc: <scottl at freebsd.org>
Subject: Re: kern/53566: IBM Eserver (245 || 345) + ServeRaid 5i ips driver panic
Date: Thu, 24 Jul 2003 19:11:11 -0000

 No good with the 0708 snap. 
 
  Copyright (c) 1992-2003 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD 5.1-CURRENT-20030708-JPSNAP #0: Tue Jul  8 00:26:27 GMT 2003
     root at ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b65000.
 Preloaded mfs_root "/boot/mfsroot" at 0xc0b65278.
 Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b652bc.
 Timecounter "i8254"  frequency 1193182 Hz
 Timecounter "TSC"  frequency 2793894552 Hz
 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.89-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
   
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
 MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Hyperthreading: 2 logical CPUs
 real memory  = 526385152 (502 MB)
 avail memory = 499220480 (476 MB)
 Pentium Pro MTRR support enabled
 md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06e1068
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 acpi0: <IBM    SERONYXP> on motherboard
 pcibios: BIOS version 2.10
 acpi0: power button is handled as a fixed feature programming model.
 Timecounter "ACPI-safe"  frequency 3579545 Hz
 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0
 acpi_cpu0: <CPU> on acpi0
 acpi_cpu1: <CPU> on acpi0
 pcib0: <ACPI Host-PCI bridge> on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib0: slot 9 INTA is routed to irq 10
 pcib0: slot 15 INTA is routed to irq 11
 pci0: <display, VGA> at device 9.0 (no driver attached)
 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x700-0x70f,0x374-
 0x377,0x17
 0-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
 ata0: at 0x1f0 irq 14 on atapci0
 ata1: simplex device, DMA on primary only
 ata1: at 0x170 irq 15 on atapci0
 ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at 
 devic
 e 15.2 on pci0
 usb0: OHCI version 1.0, legacy support
 usb0: SMM does not respond, resetting
 usb0: <OHCI (generic) USB controller> on ohci0
 usb0: USB revision 1.0
 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 4 ports with 4 removable, self powered
 isab0: <PCI-ISA bridge> at device 15.3 on pci0
 isa0: <ISA bus> on isab0
 pcib1: <ACPI Host-PCI bridge> on acpi0
 pci2: <ACPI PCI bus> on pcib1
 pcib1: slot 8 INTA is routed to irq 3
 bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfbff0000-
 0xfb
 ffffff irq 3 at device 8.0 on pci2
 bge0: Ethernet address: 00:09:6b:a5:18:05
 miibus0: <MII bus> on bge0
 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
 brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
 1000baseTX
 -FDX, auto
 pcib2: <ACPI Host-PCI bridge> on acpi0
 pci5: <ACPI PCI bus> on pcib2
 pcib2: slot 3 INTA is routed to irq 9
 ips0: <IBM ServeRAID Adapter> mem 0xf4000000-0xf7ffffff irq 9 at device 3.0 
 on p
 ci5
 ips0: logical drives: 222
 ipsd0: <Logical Drive> on ips0
 ipsd0: Logical Drive  (1824184MB)
 ipsd1: <Logical Drive> on ips0
 ipsd1: Logical Drive  (1824184MB)
 ipsd2: <Logical Drive> on ips0
 ipsd2: Logical Drive  (1824184MB)
 ipsd3: <Logical Drive> on ips0
 ipsd3: Logical Drive  (1824184MB)
 ipsd4: <Logical Drive> on ips0
 ipsd4: Logical Drive  (1824184MB)
 ipsd5: <Logical Drive> on ips0
 ipsd5: Logical Drive  (1824184MB)
 ipsd6: <Logical Drive> on ips0
 ipsd6: Logical Drive  (1824184MB)
 ipsd7: <Logical Drive> on ips0
 ipsd7: Logical Drive  (1824184MB)
 pcib3: <ACPI Host-PCI bridge> on acpi0
 pci7: <ACPI PCI bus> on pcib3
 pcib4: <ACPI Host-PCI bridge> on acpi0
 pci9: <ACPI PCI bus> on pcib4
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
 atkbd: unable to set the command byte.
 device_probe_and_attach: atkbd0 attach returned 6
 psm: failed to restore the keyboard controller command byte.
 psm0: unable to set the command byte.
 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 
 0x3f7,0x3f0-0
 x3f5 irq 6 drq 2 on acpi0
 fdc0: FIFO enabled, 8 bytes threshold
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 ppc0 port 0x378-0x37f irq 7 on acpi0
 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 sio0 port 0x3f8-0x3ff irq 4 on acpi0
 sio0: type 16550A, console
 orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
 pmtimer0 on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x100>
 sio1: configured irq 3 not in bitmap of probed irqs 0
 sio1: port may not be enabled
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 Timecounters tick every 10.000 msec
 
 
 Fatal trap 12: page fault while in kernel mode
 fault virtual address   = 0xdeadc0de
 fault code              = supervisor read, page not present
 instruction pointer     = 0x8:0xdeadc0de
 stack pointer           = 0x10:0xd63a5cd0
 frame pointer           = 0x10:0xd63a5ce0
 code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
 processor eflags        = interrupt enabled, resume, IOPL = 0
 current process         = 29 (irq9: ips0)
 kernel: type 12 trap, code=0
 Stopped at      0xdeadc0de:
 
 Fatal trap 12: page fault while in kernel mode
 fault virtual address   = 0xdeadc0de
 fault code              = supervisor read, page not present
 instruction pointer     = 0x8:0xc04928c0
 stack pointer           = 0x10:0xd63a5ad4
 frame pointer           = 0x10:0xd63a5ad8
 code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
 processor eflags        = resume, IOPL = 0
 current process         = 29 (irq9: ips0)
      kernel: type 12 trap, code=0
 db> tr
 
 
 Fatal trap 12: page fault while in kernel mode
 fault virtual address   = 0xdeadc0de
 fault code              = supervisor read, page not present
 instruction pointer     = 0x8:0xc04928c0
 stack pointer           = 0x10:0xd63a59bc
 frame pointer           = 0x10:0xd63a59c0
 code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
 processor eflags        = resume, IOPL = 0
 current process         = 29 (irq9: ips0)
 kernel: type 12 trap, code=0
 db>