Pinebook Pro display.
KIRIYAMA Kazuhiko
kiri at truefc.org
Wed Feb 10 01:10:52 UTC 2021
On Wed, 10 Feb 2021 02:28:34 +0900,
Jesper Schmitz Mouridsen wrote:
>
>
> On 09.02.2021 08.47, KIRIYAMA Kazuhiko wrote:
> > On Tue, 09 Feb 2021 16:26:52 +0900,
> > Jesper Schmitz Mouridsen wrote:
> >>
> >> On 08.02.2021 23.57, KIRIYAMA Kazuhiko wrote:
> >>> On Mon, 08 Feb 2021 17:20:38 +0900,
> >>> Jesper Schmitz Mouridsen wrote:
> >>>> On 08.02.2021 07.52, KIRIYAMA Kazuhiko wrote:
> >>>>> On Thu, 04 Feb 2021 22:24:05 +0900,
> >>>>> Jesper Schmitz Mouridsen wrote:
> >>>>>> On 04.02.2021 07.06, KIRIYAMA Kazuhiko wrote:
> >>>>>>> Hi, Jesper
> >>>>>>>
> >>>>>>> On Mon, 01 Feb 2021 00:49:24 +0900,
> >>>>>>> Jesper Schmitz Mouridsen wrote:
> >>>>>>>> Hi
> >>>>>>>>
> >>>>>>>> Just for information, I did some trial and error on u-boot for the
> >>>>>>>>
> >>>>>>>> Pinebook Pro in order to have display working without hacking
> >>>>>>>>
> >>>>>>>> the kernel. See https://github.com/jsm222/ports and
> >>>>>>> I've modified for u-boot-2020.10 [1] and remade
> >>>>>>> idbloader.img and u-boot.itb then install those and reboot.
> >>>>>>> But could not display console ;-(
> >>>>>> I sent you a PM with a patch.
> >>>>>>
> >>>>>> Also we did some duplicate work, see
> >>>>>>
> >>>>>> https://github.com/jsm222/u-boot-pinebookpro
> >>>>> I've tested above, it display until FreeBSD kernel boot but
> >>>>> blackout after. Namely display console
> >>>>> from `U-Boot 2020.10 (Feb 08 2021 -10:55:28 +0900)'
> >>>>> to `masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000'
> >>>>> and blackout after '---<<BOOT>>---' in the below log :
> >>>>>
> >>>>> root at kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0
> >>>>> Connected
> >>>>>
> >>>>> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28)
> >>>>> Channel 0: LPDDR4, 50MHz
> >>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> >>>>> Channel 1: LPDDR4, 50MHz
> >>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> >>>>> 256B stride
> >>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
> >>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
> >>>>> Trying to boot from BOOTROM
> >>>>> Returning to boot ROM...
> >>>> Hi, you also need to copy the u-boot dtb files to the efi partition
> >>>>
> >>>> from /usr/ports/sysutils/u-boot-pinebookpro/work/u-boot-2020.10.
> >>>>
> >>>> sudo find . -name "*.dtb" -exec cp -iv {} /mnt/dtb/rockchip/ \;
> >>> I'd copied *.dtb to /mnt/dtb/rockchip as follows :
> >>>
> >>> root at kazu:~ # gpart show mmcsd0
> >>> => 40 244277168 mmcsd0 GPT (116G)
> >>> 40 32728 - free - (16M)
> >>> 32768 102400 1 efi (50M)
> >>> 135168 16777216 2 freebsd-swap (8.0G)
> >>> 16912384 227364736 3 freebsd-ufs (108G)
> >>> 244277120 88 - free - (44K)
> >>>
> >>> root at kazu:~ # mount_msdosfs /dev/mmcsd0p1 /mnt
> >>> root at kazu:~ # ll /mnt/dtb/rockchip/
> >>> total 1624
> >>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 dt-spl.dtb*
> >>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 dt.dtb*
> >>> -rwxr-xr-x 1 root wheel 58854 Feb 8 20:02 rk3399-evb.dtb*
> >>> -rwxr-xr-x 1 root wheel 62750 Feb 8 20:02 rk3399-ficus.dtb*
> >>> -rwxr-xr-x 1 root wheel 63968 Feb 8 20:02 rk3399-firefly.dtb*
> >>> -rwxr-xr-x 1 root wheel 66411 Feb 8 20:02 rk3399-gru-bob.dtb*
> >>> -rwxr-xr-x 1 root wheel 63354 Feb 8 20:02 rk3399-khadas-edge-captain.dtb*
> >>> -rwxr-xr-x 1 root wheel 63346 Feb 8 20:02 rk3399-khadas-edge-v.dtb*
> >>> -rwxr-xr-x 1 root wheel 63291 Feb 8 20:02 rk3399-khadas-edge.dtb*
> >>> -rwxr-xr-x 1 root wheel 61094 Feb 8 20:02 rk3399-leez-p710.dtb*
> >>> -rwxr-xr-x 1 root wheel 63784 Feb 8 20:02 rk3399-nanopc-t4.dtb*
> >>> -rwxr-xr-x 1 root wheel 62897 Feb 8 20:02 rk3399-nanopi-m4-2gb.dtb*
> >>> -rwxr-xr-x 1 root wheel 62897 Feb 8 20:02 rk3399-nanopi-m4.dtb*
> >>> -rwxr-xr-x 1 root wheel 62753 Feb 8 20:02 rk3399-nanopi-neo4.dtb*
> >>> -rwxr-xr-x 1 root wheel 64009 Feb 8 20:02 rk3399-orangepi.dtb*
> >>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 rk3399-pinebook-pro.dtb*
> >>> -rwxr-xr-x 1 root wheel 56223 Feb 8 20:02 rk3399-puma-haikou.dtb*
> >>> -rwxr-xr-x 1 root wheel 65035 Feb 8 20:02 rk3399-roc-pc-mezzanine.dtb*
> >>> -rwxr-xr-x 1 root wheel 63850 Feb 8 20:02 rk3399-roc-pc.dtb*
> >>> -rwxr-xr-x 1 root wheel 55473 Feb 8 20:02 rk3399-rock-pi-4a.dtb*
> >>> -rwxr-xr-x 1 root wheel 62227 Feb 8 20:02 rk3399-rock-pi-4b.dtb*
> >>> -rwxr-xr-x 1 root wheel 62227 Feb 8 20:02 rk3399-rock-pi-4c.dtb*
> >>> -rwxr-xr-x 1 root wheel 62376 Feb 8 20:02 rk3399-rock960.dtb*
> >>> -rwxr-xr-x 1 root wheel 63651 Feb 8 20:02 rk3399-rockpro64.dtb*
> >>> -rwxr-xr-x 1 root wheel 59921 Feb 8 20:02 rk3399pro-rock-pi-n10.dtb*
> >>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 u-boot-spl.dtb*
> >>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 u-boot-tpl.dtb*
> >>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 u-boot.dtb*
> >>> root at kazu:~ #
> >>>
> >>> But does not display console as well ;-) Boot log is as
> >>> follows :
> >> Hi,
> >>
> >> What is your output of
> >>
> >> sysctl hw.clock.aclk_vop1
> >>
> >> my output is:
> >>
> >> hw.clock.aclk_vop1.enable_cnt: 0
> >> hw.clock.aclk_vop1.childrens:
> >> hw.clock.aclk_vop1.parents: aclk_vop1_pre
> >> hw.clock.aclk_vop1.parent: aclk_vop1_pre
> >> hw.clock.aclk_vop1.frequency: 594000000
> >> and sysctl hw.clock.cpll
> >>
> >> my output is:
> >>
> >> hw.clock.cpll.enable_cnt: 16
> >> hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c
> >> aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c clk_crypto0_c clk_crypto1_c
> >> clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c
> >> clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src
> >> clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c
> >> aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre
> >> clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c
> >> clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace
> >> cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src
> >> cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src
> >> cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c clk_sdmmc_c
> >> hw.clock.cpll.parents: xin24m xin32k
> >> hw.clock.cpll.parent: xin24m
> >> hw.clock.cpll.frequency: 800000000
> > My outputs are :
> >
> > root at kazu:~ # sysctl hw.clock.aclk_vop1
> > hw.clock.aclk_vop1.enable_cnt: 0
> > hw.clock.aclk_vop1.childrens:
> > hw.clock.aclk_vop1.parents: aclk_vop1_pre
> > hw.clock.aclk_vop1.parent: aclk_vop1_pre
> > hw.clock.aclk_vop1.frequency: 594000000
> > root at kazu:~ # sysctl hw.clock.cpll
> > hw.clock.cpll.enable_cnt: 14
> > hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c hclk_sd_c clk_crypto0_c clk_crypto1_c clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c
> > hw.clock.cpll.parents: xin24m xin32k
> > hw.clock.cpll.parent: xin24m
> > hw.clock.cpll.frequency: 800000000
> > root at kazu:~ #
> >
> > Regards
> >
> > ---
> > Kazuhiko Kiriyama <kiri at truefc.org>
> >
> Hi,
>
> Can you try [1] on a sd card with uart disabled and emmc blocked? It
> works for me.
>
> I have not tested it with uart enabled..
Anyway in the present state, I've booted with uart disabled,
but could not display. I found error before uboot :
root at kazu:~ # cu -s 1500000 -l /dev/cuaU0
Connected
U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900)
Trying to boot from MMC2
U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900)
SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 Pinebook Pro
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc at fe310000: 2, mmc at fe320000: 1, sdhci at fe330000: 0
Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
*** Warning - spi_flash_probe_bus_cs() failed, using default environment
In: serial
Out: vidconsole
Err: vidconsole
Model: Pine64 Pinebook Pro
Net: No ethernet found.
Hit any key to stop autoboot: 0
=>
I'd try [1] later.
Regards
>
> [1]
> http://build.schmitz.computer/build/FreeBSD-13.0-ALPHA2-arm64-aarch64-ROCKPRO64-pbp-mod2-20210122-02611ef8ee9-256201.img.xz
>
>
> /Jesper.
>
> >> /Jesper
> >>
> >>
> >>> root at kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0
> >>> Connected
> >>>
> >>> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28)
> >>> Channel 0: LPDDR4, 50MHz
> >>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> >>> Channel 1: LPDDR4, 50MHz
> >>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> >>> 256B stride
> >>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
> >>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
> >>> Trying to boot from BOOTROM
> >>> Returning to boot ROM...
> >>>
> >>> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900)
> >>> Trying to boot from MMC2
> >>>
> >>>
> >>> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900)
> >>> Consoles: EFI console
> >>> Reading loader env vars from /efi/freebsd/loader.env
> >>> Setting currdev to disk0p1:
> >>> FreeBSD/arm64 EFI loader, Revision 1.1
> >>> (Fri Jan 8 12:04:36 JST 2021 admin at lmainkx)
> >>>
> >>> Command line arguments: loader.efi
> >>> Image base: 0xf3df0000
> >>> EFI version: 2.80
> >>> EFI Firmware: Das U-Boot (rev 8224.4096)
> >>> Console: comconsole (0)
> >>> Load Path: /efi\boot\bootaa64.efi
> >>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
> >>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
> >>> Setting currdev to disk0p1:
> >>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000)
> >>> Setting currdev to disk0p2:
> >>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80)
> >>> Setting currdev to disk0p3:
> >>> Loading /boot/defaults/loader.conf
> >>> Loading /boot/defaults/loader.conf
> >>> Loading /boot/device.hints
> >>> Loading /boot/loader.conf
> >>> Loading /boot/loader.conf.local
> >>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_| !
!
> > |_| !
> >>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop
> >>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop
> >>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop
> >>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop
> >>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop
> >>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop
> >>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop
> >>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop
> >>> [25;0HLoading kernel...
> >>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e]
> >>> Loading configured modules...
> >>> /etc/hostid size=0x25
> >>> /boot/entropy size=0x1000
> >>> Using DTB provided by EFI at 0x80ec000.
> >>> EFI framebuffer information:
> >>> addr, size 0xf7800000, 0x3f4800
> >>> dimensions 1920 x 1080
> >>> stride 1920
> >>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
> >>> ---<<BOOT>>---
> >>> KDB: debugger backends: ddb
> >>> KDB: current backend: ddb
> >>> Copyright (c) 1992-2020 The FreeBSD Project.
> >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >>> The Regents of the University of California. All rights reserved.
> >>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> >>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021
> >>> admin at lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> >>> FreeBSD clang version 11.0.0 (git at github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
> >>> WARNING: WITNESS option enabled, expect reduced performance.
> >>> VT(efifb): resolution 1920x1080
> >>> module firmware already present!
> >>> real memory = 4158373888 (3965 MB)
> >>> avail memory = 4025094144 (3838 MB)
> >>> Starting CPU 1 (1)
> >>> Starting CPU 2 (2)
> >>> Starting CPU 3 (3)
> >>> Starting CPU 4 (100)
> >>> Starting CPU 5 (101)
> >>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
> >>> random: unblocking device.
> >>> random: entropy device external interface
> >>> MAP f3f16000 mode 2 pages 4
> >>> MAP f3f1b000 mode 2 pages 4
> >>> MAP f6f40000 mode 2 pages 16
> >>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
> >>> kbd0 at kbdmux0
> >>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
> >>> ofwbus0: <Open Firmware Device Tree>
> >>> clk_fixed0: <Fixed clock> on ofwbus0
> >>> simplebus0: <Flattened device tree simple bus> on ofwbus0
> >>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0
> >>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0
> >>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0
> >>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0
> >>> regfix0: <Fixed Regulator> on ofwbus0
> >>> regfix1: <Fixed Regulator> on ofwbus0
> >>> regfix2: <Fixed Regulator> on ofwbus0
> >>> regfix3: <Fixed Regulator> on ofwbus0
> >>> regfix4: <Fixed Regulator> on ofwbus0
> >>> regfix5: <Fixed Regulator> on ofwbus0
> >>> regfix6: <Fixed Regulator> on ofwbus0
> >>> regfix7: <Fixed Regulator> on ofwbus0
> >>> regfix8: <Fixed Regulator> on ofwbus0
> >>> regfix9: <Fixed Regulator> on ofwbus0
> >>> regfix10: <Fixed Regulator> on ofwbus0
> >>> regfix11: <Fixed Regulator> on ofwbus0
> >>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0
> >>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> >>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0
> >>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0
> >>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0
> >>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
> >>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0
> >>> gpiobus0: <OFW GPIO bus> on gpio0
> >>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0
> >>> gpiobus1: <OFW GPIO bus> on gpio1
> >>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0
> >>> gpiobus2: <OFW GPIO bus> on gpio2
> >>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0
> >>> gpiobus3: <OFW GPIO bus> on gpio3
> >>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0
> >>> gpiobus4: <OFW GPIO bus> on gpio4
> >>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
> >>> iicbus0: <OFW I2C bus> on rk_i2c0
> >>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
> >>> iicbus1: <OFW I2C bus> on rk_i2c1
> >>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
> >>> iicbus2: <OFW I2C bus> on rk_i2c2
> >>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
> >>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
> >>> iicbus3: <OFW I2C bus> on rk_i2c3
> >>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
> >>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
> >>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
> >>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
> >>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0
> >>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0
> >>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0
> >>> cpulist0: <Open Firmware CPU Group> on ofwbus0
> >>> cpu0: <Open Firmware CPU> on cpulist0
> >>> cpufreq_dt0: <Generic cpufreq driver> on cpu0
> >>> cpu1: <Open Firmware CPU> on cpulist0
> >>> cpufreq_dt1: <Generic cpufreq driver> on cpu1
> >>> cpu2: <Open Firmware CPU> on cpulist0
> >>> cpufreq_dt2: <Generic cpufreq driver> on cpu2
> >>> cpu3: <Open Firmware CPU> on cpulist0
> >>> cpufreq_dt3: <Generic cpufreq driver> on cpu3
> >>> cpu4: <Open Firmware CPU> on cpulist0
> >>> cpufreq_dt4: <Generic cpufreq driver> on cpu4
> >>> cpu5: <Open Firmware CPU> on cpulist0
> >>> cpufreq_dt5: <Generic cpufreq driver> on cpu5
> >>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0
> >>> pcib0: Gen1 link training timeouted: 0x00080001.
> >>> pci0: <PCI bus> on pcib0
> >>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
> >>> pcib0: failed to reserve resource for pcib1
> >>> pcib1: failed to allocate initial memory window: 0-0xfffff
> >>> pci1: <PCI bus> on pcib1
> >>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
> >>> rockchip_dwmmc0: Hardware version ID is 270a
> >>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
> >>> rockchip_dwmmc1: Hardware version ID is 270a
> >>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0
> >>> rk_emmcphy0: got emmcclk clock
> >>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk.
> >>> sdhci_fdt0: 1 slot(s) allocated
> >>> mmc0: <MMC/SD bus> on sdhci_fdt0
> >>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0
> >>> usbus0: EHCI version 1.0
> >>> usbus0 on ehci0
> >>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0
> >>> usbus1 on ohci0
> >>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0
> >>> usbus2: EHCI version 1.0
> >>> usbus2 on ehci1
> >>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0
> >>> usbus3 on ohci1
> >>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
> >>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30
> >>> xhci0: 64 bytes context size, 32-bit DMA
> >>> usbus4: trying to attach
> >>> usbus4 on xhci0
> >>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
> >>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31
> >>> xhci1: 64 bytes context size, 32-bit DMA
> >>> usbus5: trying to attach
> >>> usbus5 on xhci1
> >>> iicbus0: <unknown card> at addr 0x22
> >>> iic0: <I2C generic I/O> on iicbus0
> >>> iic1: <I2C generic I/O> on iicbus1
> >>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0
> >>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0
> >>> uart1: console (1500000,n,8,1)
> >>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
> >>> spibus0: <OFW SPI bus> on spi0
> >>> spibus0: <unknown card> at cs 0 mode 0
> >>> iicbus2: <unknown card> at addr 0x82
> >>> iic2: <I2C generic I/O> on iicbus2
> >>> iicbus3: <unknown card> at addr 0x44
> >>> iic3: <I2C generic I/O> on iicbus3
> >>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
> >>> pwmbus0: <OFW PWM bus> on pwm0
> >>> pwmc0: <PWM Control> channel 0 on pwmbus0
> >>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
> >>> pwmbus1: <OFW PWM bus> on pwm1
> >>> pwmc1: <PWM Control> channel 0 on pwmbus1
> >>> gpioc0: <GPIO controller> on gpio0
> >>> gpioc1: <GPIO controller> on gpio1
> >>> gpioc2: <GPIO controller> on gpio2
> >>> gpioc3: <GPIO controller> on gpio3
> >>> gpioc4: <GPIO controller> on gpio4
> >>> gpioled0: <GPIO LEDs> on ofwbus0
> >>> cryptosoft0: <software crypto>
> >>> Timecounters tick every 1.000 msec
> >>> usbus0: 480Mbps High Speed USB v2.0
> >>> usbus1: 12Mbps Full Speed USB v1.0
> >>> usbus2: 480Mbps High Speed USB v2.0
> >>> usbus3: 12Mbps Full Speed USB v1.0
> >>> usbus4: 5.0Gbps Super Speed USB v3.0
> >>> usbus5: 5.0Gbps Super Speed USB v3.0
> >>> ugen3.1: <Generic OHCI root HUB> at usbus3
> >>> uhub0 on usbus3
> >>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> >>> ugen2.1: <Generic EHCI root HUB> at usbus2
> >>> uhub1 on usbus2
> >>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> >>> ugen1.1: <Generic OHCI root HUB> at usbus1
> >>> uhub2 on usbus1
> >>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> >>> ugen0.1: <Generic EHCI root HUB> at usbus0
> >>> uhub3 on usbus0
> >>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> >>> ugen5.1: <Synopsys XHCI root HUB> at usbus5
> >>> uhub4 on usbus5
> >>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
> >>> ugen4.1: <Synopsys XHCI root HUB> at usbus4
> >>> uhub5 on usbus4
> >>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
> >>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block
> >>> mmcsd0boot0: 4MB partition 1 at mmcsd0
> >>> mmcsd0boot1: 4MB partition 2 at mmcsd0
> >>> mmcsd0rpmb: 17MB partition 3 at mmcsd0
> >>> Release APs...done
> >>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0
> >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
> >>> Instruction Set Attributes 1 = <>
> >>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
> >>> Processor Features 1 = <>
> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>> Memory Model Features 1 = <8bit VMID>
> >>> Memory Model Features 2 = <32bit CCIDX,48bit VA>
> >>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
> >>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
> >>> Debug Features 1 = <>
> >>> Auxiliary Features 0 = <>
> >>> Auxiliary Features 1 = <>
> >>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1
> >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2
> >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3
> >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0
> >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
> >>> CPU 5: ARM Cortex- Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
> >>> WARNING: WITNESS option enabled, expect reduced performance.
> >>> Unresolved linked clock found: clkin_gmac
> >>> uhub0: 1 port with 1 removable, self powered
> >>> uhub2: 1 port with 1 removable, self powered
> >>> uhub5: 2 ports with 2 removable, self powered
> >>> Warning: no time-of-day clock registered, uhub4: 2 ports with 2 removable, self powered
> >>> system time will not be set accurately
> >>> uhub1: 1 port with 1 removable, self powered
> >>> uhub3: 1 port with 1 removable, self powered
> >>> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
> >>> Setting hostid: 0x5d4b60f9.
> >>> Starting file system checks:
> >>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
> >>> /dev/mmcsd0p3: clean, 27264084 free (348 frags, 3407967 blocks, 0.0% fragmentation)
> >>> lock order reversal:
> >>> 1st 0xffffa00062d92810 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724
> >>> 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918
> >>> lock order devfs -> ufs established at:
> >>> #0 0xffff000000569234 at witness_checkorder+0x448
> >>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
> >>> #2 0xffff00000075ad38 at ffs_lock+0x64
> >>> #3 0xffff0000005ed57c at _vn_lock+0x54
> >>> #4 0xffff0000005ce630 at vfs_domount+0xdf8
> >>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
> >>> #6 0xffff0000005d0e78 at kernel_mount+0x4c
> >>> #7 0xffff0000005d3564 at parse_mount+0x49c
> >>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
> >>> #9 0xffff00000048dc68 at start_init+0x24
> >>> #10 0xffff0000004b7474 at fork_exit+0x7c
> >>> lock order ufs -> devfs attempted at:
> >>> #0 0xffff000000569a40 at witness_checkorder+0xc54
> >>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
> >>> #2 0xffff0000005ed57c at _vn_lock+0x54
> >>> #3 0xffff0000005d77d8 at vget_finish+0x4c
> >>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
> >>> #5 0xffff0000003b12c0 at devfs_root+0x44
> >>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
> >>> #7 0xffff0000005d89b0 at vflush+0x5c
> >>> #8 0xffff0000003b11c8 at devfs_unmount+0x34
> >>> #9 0xffff0000005cf4c4 at dounmount+0x43c
> >>> #10 0xffff0000005cf040 at kern_unmount+0x2d8
> >>> #11 0xffff000000812d0c at do_el0_sync+0x454
> >>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
> >>> Mounting local filesystems:.
> >>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
> >>> Setting hostname: kazu.tfc.
> >>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
> >>> ukbd0 on uhub2
> >>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1
> >>> kbd1 at ukbd0
> >>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
> >>> Feeding entropy: .
> >>> lo0: link state changed to UP
> >>> Starting Network: lo0.
> >>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> >>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
> >>> inet6 ::1 prefixlen 128
> >>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
> >>> inet 127.0.0.1 netmask 0xff000000
> >>> groups: lo
> >>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> >>> Starting devd.
> >>> Autoloading module: mx25l.ko
> >>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
> >>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K
> >>> Autoloading module: pwm_backlight.ko
> >>> link_elf: symbol backlight_get_info_desc undefined
> >>> kldload: can't load pwm_backlight.ko: No such file or directory
> >>> Autoloading module: uhid.ko
> >>> Autoloading module: wmt.ko
> >>> add host 127.0.0.1: gateway lo0 fib 0: route already in table
> >>> route: writing to routing socket: Network is unreachable
> >>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable
> >>> add host ::1: gateway lo0 fib 0: route already in table
> >>> add net fe80::: gateway ::1
> >>> add net ff02::: gateway ::1
> >>> add net ::ffff:0.0.0.0: gateway ::1
> >>> add net ::0.0.0.0: gateway ::1
> >>> Updating /var/run/os-release done.
> >>> Creating and/or trimming log files.
> >>> Updating motd:.
> >>> Clearing /tmp (X related).
> >>> Starting syslogd.
> >>> No core dumps found.
> >>> Mounting late filesystems:.
> >>> Security policy loaded: MAC/ntpd (mac_ntpd)
> >>> Starting ntpd.
> >>> Feb 9 07:23:09 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 43 days ago
> >>> Performing sanity check on sshd configuration.
> >>> Starting sshd.
> >>> Starting cron.
> >>> Starting sendmail.
> >>> Starting sendmail_msp_queue.
> >>> Feb 9 07:23:10 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8)
> >>> Configuring vt: blanktime screensaverkldload: can't load logo_saver: No such file or directory
> >>> /etc/rc: WARNING: Unable to load kernel module logo_saver
> >>> .
> >>> Starting background file system checks in 60 seconds.
> >>>
> >>> Tue Feb 9 07:23:11 JST 2021
> >>>
> >>> FreeBSD/arm64 (kazu.tfc) (ttyu1)
> >>>
> >>> login:
> >>>
> >>>> after make. Otherwise the ACLK_VOP1 goes to 800000000, and
> >>>>
> >>>> we lose display.
> >>>>
> >>>> /Jesper
> >>>>
> >>>>> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900)
> >>>>> Trying to boot from MMC2
> >>>>>
> >>>>>
> >>>>> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900)
> >>>>> Consoles: EFI console
> >>>>> Reading loader env vars from /efi/freebsd/loader.env
> >>>>> Setting currdev to disk0p1:
> >>>>> FreeBSD/arm64 EFI loader, Revision 1.1
> >>>>> (Fri Jan 8 12:04:36 JST 2021 admin at lmainkx)
> >>>>>
> >>>>> Command line arguments: loader.efi
> >>>>> Image base: 0xf3df0000
> >>>>> EFI version: 2.80
> >>>>> EFI Firmware: Das U-Boot (rev 8224.4096)
> >>>>> Console: comconsole (0)
> >>>>> Load Path: /efi\boot\bootaa64.efi
> >>>>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
> >>>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000)
> >>>>> Setting currdev to disk0p1:
> >>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000)
> >>>>> Setting currdev to disk0p2:
> >>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80)
> >>>>> Setting currdev to disk0p3:
> >>>>> Loading /boot/defaults/loader.conf
> >>>>> Loading /boot/defaults/loader.conf
> >>>>> Loading /boot/device.hints
> >>>>> Loading /boot/loader.conf
> >>>>> Loading /boot/loader.conf.local
> >>>>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_!
| !
> > !
> >>> |_| !
> >>>>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop
> >>>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop
> >>>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop
> >>>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop
> >>>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop
> >>>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop
> >>>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop
> >>>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop
> >>>>> [25;0HLoading kernel...
> >>>>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e]
> >>>>> Loading configured modules...
> >>>>> /etc/hostid size=0x25
> >>>>> /boot/entropy size=0x1000
> >>>>> Using DTB provided by EFI at 0x80ec000.
> >>>>> EFI framebuffer information:
> >>>>> addr, size 0xf7800000, 0x3f4800
> >>>>> dimensions 1920 x 1080
> >>>>> stride 1920
> >>>>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
> >>>>> ---<<BOOT>>---
> >>>>> KDB: debugger backends: ddb
> >>>>> KDB: current backend: ddb
> >>>>> Copyright (c) 1992-2020 The FreeBSD Project.
> >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >>>>> The Regents of the University of California. All rights reserved.
> >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> >>>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021
> >>>>> admin at lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> >>>>> FreeBSD clang version 11.0.0 (git at github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
> >>>>> WARNING: WITNESS option enabled, expect reduced performance.
> >>>>> VT(efifb): resolution 1920x1080
> >>>>> module firmware already present!
> >>>>> real memory = 4158373888 (3965 MB)
> >>>>> avail memory = 4025094144 (3838 MB)
> >>>>> Starting CPU 1 (1)
> >>>>> Starting CPU 2 (2)
> >>>>> Starting CPU 3 (3)
> >>>>> Starting CPU 4 (100)
> >>>>> Starting CPU 5 (101)
> >>>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
> >>>>> random: unblocking device.
> >>>>> random: entropy device external interface
> >>>>> MAP f3f16000 mode 2 pages 4
> >>>>> MAP f3f1b000 mode 2 pages 4
> >>>>> MAP f6f40000 mode 2 pages 16
> >>>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
> >>>>> kbd0 at kbdmux0
> >>>>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
> >>>>> ofwbus0: <Open Firmware Device Tree>
> >>>>> clk_fixed0: <Fixed clock> on ofwbus0
> >>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
> >>>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0
> >>>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0
> >>>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0
> >>>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0
> >>>>> regfix0: <Fixed Regulator> on ofwbus0
> >>>>> regfix1: <Fixed Regulator> on ofwbus0
> >>>>> regfix2: <Fixed Regulator> on ofwbus0
> >>>>> regfix3: <Fixed Regulator> on ofwbus0
> >>>>> regfix4: <Fixed Regulator> on ofwbus0
> >>>>> regfix5: <Fixed Regulator> on ofwbus0
> >>>>> regfix6: <Fixed Regulator> on ofwbus0
> >>>>> regfix7: <Fixed Regulator> on ofwbus0
> >>>>> regfix8: <Fixed Regulator> on ofwbus0
> >>>>> regfix9: <Fixed Regulator> on ofwbus0
> >>>>> regfix10: <Fixed Regulator> on ofwbus0
> >>>>> regfix11: <Fixed Regulator> on ofwbus0
> >>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0
> >>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> >>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0
> >>>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0
> >>>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0
> >>>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
> >>>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0
> >>>>> gpiobus0: <OFW GPIO bus> on gpio0
> >>>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0
> >>>>> gpiobus1: <OFW GPIO bus> on gpio1
> >>>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0
> >>>>> gpiobus2: <OFW GPIO bus> on gpio2
> >>>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0
> >>>>> gpiobus3: <OFW GPIO bus> on gpio3
> >>>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0
> >>>>> gpiobus4: <OFW GPIO bus> on gpio4
> >>>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
> >>>>> iicbus0: <OFW I2C bus> on rk_i2c0
> >>>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
> >>>>> iicbus1: <OFW I2C bus> on rk_i2c1
> >>>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
> >>>>> iicbus2: <OFW I2C bus> on rk_i2c2
> >>>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
> >>>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
> >>>>> iicbus3: <OFW I2C bus> on rk_i2c3
> >>>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
> >>>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
> >>>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
> >>>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
> >>>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0
> >>>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0
> >>>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0
> >>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
> >>>>> cpu0: <Open Firmware CPU> on cpulist0
> >>>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0
> >>>>> cpu1: <Open Firmware CPU> on cpulist0
> >>>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1
> >>>>> cpu2: <Open Firmware CPU> on cpulist0
> >>>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2
> >>>>> cpu3: <Open Firmware CPU> on cpulist0
> >>>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3
> >>>>> cpu4: <Open Firmware CPU> on cpulist0
> >>>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4
> >>>>> cpu5: <Open Firmware CPU> on cpulist0
> >>>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5
> >>>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0
> >>>>> pcib0: Gen1 link training timeouted: 0x00080001.
> >>>>> pci0: <PCI bus> on pcib0
> >>>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
> >>>>> pcib0: failed to reserve resource for pcib1
> >>>>> pcib1: failed to allocate initial memory window: 0-0xfffff
> >>>>> pci1: <PCI bus> on pcib1
> >>>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
> >>>>> rockchip_dwmmc0: Hardware version ID is 270a
> >>>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
> >>>>> rockchip_dwmmc1: Hardware version ID is 270a
> >>>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0
> >>>>> rk_emmcphy0: got emmcclk clock
> >>>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk.
> >>>>> sdhci_fdt0: 1 slot(s) allocated
> >>>>> mmc0: <MMC/SD bus> on sdhci_fdt0
> >>>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0
> >>>>> usbus0: EHCI version 1.0
> >>>>> usbus0 on ehci0
> >>>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0
> >>>>> usbus1 on ohci0
> >>>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0
> >>>>> usbus2: EHCI version 1.0
> >>>>> usbus2 on ehci1
> >>>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0
> >>>>> usbus3 on ohci1
> >>>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
> >>>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30
> >>>>> xhci0: 64 bytes context size, 32-bit DMA
> >>>>> usbus4: trying to attach
> >>>>> usbus4 on xhci0
> >>>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
> >>>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31
> >>>>> xhci1: 64 bytes context size, 32-bit DMA
> >>>>> usbus5: trying to attach
> >>>>> usbus5 on xhci1
> >>>>> iicbus0: <unknown card> at addr 0x22
> >>>>> iic0: <I2C generic I/O> on iicbus0
> >>>>> iic1: <I2C generic I/O> on iicbus1
> >>>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0
> >>>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0
> >>>>> uart1: console (1500000,n,8,1)
> >>>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
> >>>>> spibus0: <OFW SPI bus> on spi0
> >>>>> spibus0: <unknown card> at cs 0 mode 0
> >>>>> iicbus2: <unknown card> at addr 0x82
> >>>>> iic2: <I2C generic I/O> on iicbus2
> >>>>> iicbus3: <unknown card> at addr 0x44
> >>>>> iic3: <I2C generic I/O> on iicbus3
> >>>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
> >>>>> pwmbus0: <OFW PWM bus> on pwm0
> >>>>> pwmc0: <PWM Control> channel 0 on pwmbus0
> >>>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
> >>>>> pwmbus1: <OFW PWM bus> on pwm1
> >>>>> pwmc1: <PWM Control> channel 0 on pwmbus1
> >>>>> gpioc0: <GPIO controller> on gpio0
> >>>>> gpioc1: <GPIO controller> on gpio1
> >>>>> gpioc2: <GPIO controller> on gpio2
> >>>>> gpioc3: <GPIO controller> on gpio3
> >>>>> gpioc4: <GPIO controller> on gpio4
> >>>>> gpioled0: <GPIO LEDs> on ofwbus0
> >>>>> cryptosoft0: <software crypto>
> >>>>> Timecounters tick every 1.000 msec
> >>>>> usbus0: 480Mbps High Speed USB v2.0
> >>>>> usbus1: 12Mbps Full Speed USB v1.0
> >>>>> usbus2: 480Mbps High Speed USB v2.0
> >>>>> usbus3: 12Mbps Full Speed USB v1.0
> >>>>> usbus4: 5.0Gbps Super Speed USB v3.0
> >>>>> usbus5: 5.0Gbps Super Speed USB v3.0
> >>>>> ugen3.1: <Generic OHCI root HUB> at usbus3
> >>>>> uhub0 on usbus3
> >>>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> >>>>> ugen2.1: <Generic EHCI root HUB> at usbus2
> >>>>> uhub1 on usbus2
> >>>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> >>>>> ugen1.1: <Generic OHCI root HUB> at usbus1
> >>>>> uhub2 on usbus1
> >>>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> >>>>> ugen0.1: <Generic EHCI root HUB> at usbus0
> >>>>> uhub3 on usbus0
> >>>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> >>>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5
> >>>>> uhub4 on usbus5
> >>>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
> >>>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4
> >>>>> uhub5 on usbus4
> >>>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
> >>>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block
> >>>>> mmcsd0boot0: 4MB partition 1 at mmcsd0
> >>>>> mmcsd0boot1: 4MB partition 2 at mmcsd0
> >>>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0
> >>>>> Release APs...done
> >>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0
> >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
> >>>>> Instruction Set Attributes 1 = <>
> >>>>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
> >>>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
> >>>>> Processor Features 1 = <>
> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>>>> Memory Model Features 1 = <8bit VMID>
> >>>>> Memory Model Features 2 = <32bit CCIDX,48bit VA>
> >>>>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
> >>>>> Debug Features 1 = <>
> >>>>> Auxiliary Features 0 = <>
> >>>>> Auxiliary Features 1 = <>
> >>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1
> >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>>>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2
> >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>>>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3
> >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>>>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0
> >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
> >>>>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1
> >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
> >>>>> WARNING: WITNESS option enabled, expect reduced performance.
> >>>>> Unresolved linked clock found: clkin_gmac
> >>>>> uhub0: 1 port with 1 removable, self powered
> >>>>> uhub2: 1 port with 1 removable, self powered
> >>>>> uhub5: 2 ports with 2 removable, self powered
> >>>>> uhub4: 2 ports with 2 removable, self powered
> >>>>> Warning: no time-of-day clock registered, system time will not be set accurately
> >>>>> uhub1: 1 port with 1 removable, self powered
> >>>>> uhub3: 1 port with 1 removable, self powered
> >>>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
> >>>>> Setting hostid: 0x5d4b60f9.
> >>>>> Starting file system checks:
> >>>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
> >>>>> /dev/mmcsd0p3: clean, 27264803 free (363 frags, 3408055 blocks, 0.0% fragmentation)
> >>>>> lock order reversal:
> >>>>> 1st 0xffffa00062c99440 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724
> >>>>> 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918
> >>>>> lock order devfs -> ufs established at:
> >>>>> #0 0xffff000000569234 at witness_checkorder+0x448
> >>>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
> >>>>> #2 0xffff00000075ad38 at ffs_lock+0x64
> >>>>> #3 0xffff0000005ed57c at _vn_lock+0x54
> >>>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8
> >>>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
> >>>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c
> >>>>> #7 0xffff0000005d3564 at parse_mount+0x49c
> >>>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
> >>>>> #9 0xffff00000048dc68 at start_init+0x24
> >>>>> #10 0xffff0000004b7474 at fork_exit+0x7c
> >>>>> lock order ufs -> devfs attempted at:
> >>>>> #0 0xffff000000569a40 at witness_checkorder+0xc54
> >>>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
> >>>>> #2 0xffff0000005ed57c at _vn_lock+0x54
> >>>>> #3 0xffff0000005d77d8 at vget_finish+0x4c
> >>>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
> >>>>> #5 0xffff0000003b12c0 at devfs_root+0x44
> >>>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
> >>>>> #7 0xffff0000005d89b0 at vflush+0x5c
> >>>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34
> >>>>> #9 0xffff0000005cf4c4 at dounmount+0x43c
> >>>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8
> >>>>> #11 0xffff000000812d0c at do_el0_sync+0x454
> >>>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
> >>>>> Mounting local filesystems:.
> >>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
> >>>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
> >>>>> ukbd0 on uhub2
> >>>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1
> >>>>> kbd1 at ukbd0
> >>>>> Setting hostname: kazu.tfc.
> >>>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
> >>>>> Feeding entropy: .
> >>>>> lo0: link state changed to UP
> >>>>> Starting Network: lo0.
> >>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> >>>>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
> >>>>> inet6 ::1 prefixlen 128
> >>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
> >>>>> inet 127.0.0.1 netmask 0xff000000
> >>>>> groups: lo
> >>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> >>>>> Starting devd.
> >>>>> Autoloading module: mx25l.ko
> >>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
> >>>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K
> >>>>> Autoloading module: pwm_backlight.ko
> >>>>> link_elf: symbol backlight_get_info_desc undefined
> >>>>> kldload: can't load pwm_backlight.ko: No such file or directory
> >>>>> Autoloading module: uhid.ko
> >>>>> Autoloading module: wmt.ko
> >>>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table
> >>>>> route: writing to routing socket: Network is unreachable
> >>>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable
> >>>>> add host ::1: gateway lo0 fib 0: route already in table
> >>>>> add net fe80::: gateway ::1
> >>>>> add net ff02::: gateway ::1
> >>>>> add net ::ffff:0.0.0.0: gateway ::1
> >>>>> add net ::0.0.0.0: gateway ::1
> >>>>> Updating /var/run/os-release done.
> >>>>> Creating and/or trimming log files.
> >>>>> Updating motd:.
> >>>>> Clearing /tmp (X related).
> >>>>> Starting syslogd.
> >>>>> No core dumps found.
> >>>>> Mounting late filesystems:.
> >>>>> Security policy loaded: MAC/ntpd (mac_ntpd)
> >>>>> Starting ntpd.
> >>>>> Feb 8 15:24:40 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 43 days ago
> >>>>> Performing sanity check on sshd configuration.
> >>>>> Starting sshd.
> >>>>> Starting cron.
> >>>>> Starting sendmail.
> >>>>> Starting sendmail_msp_queue.
> >>>>> Feb 8 15:24:41 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8)
> >>>>> Configuring vt: blanktime screensaverkldload: can't load logo_saver: No such file or directory
> >>>>> /etc/rc: WARNING: Unable to load kernel module logo_saver
> >>>>> .
> >>>>> Starting background file system checks in 60 seconds.
> >>>>>
> >>>>> Mon Feb 8 15:24:42 JST 2021
> >>>>>
> >>>>> FreeBSD/arm64 (kazu.tfc) (ttyu1)
> >>>>>
> >>>>> login:
> >>>>>
> >>>>>
> >>>>>> regards
> >>>>>>
> >>>>>> /Jesper
> >>>>>>
> >>>>>>> root at kazu:~ # cu -s 1500000 -l /dev/cuaU0
> >>>>>>> Connected
> >>>>>>>
> >>>>>>> U-Boot TPL 2020.10 (Feb 03 2021 - 11:13:01)
> >>>>>>> Channel 0: LPDDR4, 50MHz
> >>>>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> >>>>>>> Channel 1: LPDDR4, 50MHz
> >>>>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> >>>>>>> 256B stride
> >>>>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
> >>>>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
> >>>>>>> Trying to boot from BOOTROM
> >>>>>>> Returning to boot ROM...
> >>>>>>>
> >>>>>>> U-Boot SPL 2020.10 (Feb 03 2021 - 11:13:01 +0900)
> >>>>>>> Trying to boot from MMC2
> >>>>>>>
> >>>>>>>
> >>>>>>> U-Boot 2020.10 (Feb 03 2021 - 11:13:01 +0900)
> >>>>>>>
> >>>>>>> SoC: Rockchip rk3399
> >>>>>>> Reset cause: POR
> >>>>>>> Model: Pine64 Pinebook Pro
> >>>>>>> DRAM: 3.9 GiB
> >>>>>>> PMIC: RK808
> >>>>>>> MMC: mmc at fe310000: 2, mmc at fe320000: 1, sdhci at fe330000: 0
> >>>>>>> Loading Environment from SPIFlash... Invalid bus 0 (err=-19)
> >>>>>>> *** Warning - spi_flash_probe_bus_cs() failed, using default environment
> >>>>>>>
> >>>>>>> In: serial
> >>>>>>> Out: serial
> >>>>>>> Err: serial
> >>>>>>> Model: Pine64 Pinebook Pro
> >>>>>>> Net: No ethernet found.
> >>>>>>> Failed to load 'splash.bmp'
> >>>>>>> Card did not respond to voltage select!
> >>>>>>> Hit any key to stop autoboot: 0
> >>>>>>> Consoles: EFI console
> >>>>>>> Read loader env vars from /efi/freebsd/loader.env
> >>>>>>> Setting currdev to disk0p1:
> >>>>>>> FreeBSD/arm64 EFI loader, Revision 1.1
> >>>>>>> (Fri Jan 8 12:04:36 JST 2021 admin at lmainkx)
> >>>>>>>
> >>>>>>> Command line arguments: loader.efi
> >>>>>>> Image base: 0xf3dee000
> >>>>>>> EFI version: 2.80
> >>>>>>> EFI Firmware: Das U-Boot (rev 8224.4096)
> >>>>>>> Console: comconsole (0)
> >>>>>>> Load Path: /efi\boot\bootaa64.efi
> >>>>>>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000)
> >>>>>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000)
> >>>>>>> Setting currdev to disk0p1:
> >>>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x21000,0x1000000)
> >>>>>>> Setting currdev to disk0p2:
> >>>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x1021000,0xd8d4f80)
> >>>>>>> Setting currdev to disk0p3:
> >>>>>>> Loading /boot/defaults/loader.conf
> >>>>>>> Loading /boot/defaults/loader.conf
> >>>>>>> Loading /boot/device.hints
> >>>>>>> Loading /boot/loader.conf
> >>>>>>> Loading /boot/loader.conf.local
> >>>>>>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H !
|_!
> > | !
> >>> !
> >>>>> |_| !
> >>>>>>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 9 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 8 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 7 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop
> >>>>>>> [25;0HLoading kernel...
> >>>>>>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e]
> >>>>>>> Loading configured modules...
> >>>>>>> /etc/hostid size=0x25
> >>>>>>> /boot/entropy size=0x1000
> >>>>>>> Using DTB provided by EFI at 0x80ec000.
> >>>>>>> EFI framebuffer information:
> >>>>>>> addr, size 0xf7800000, 0x3f4800
> >>>>>>> dimensions 1920 x 1080
> >>>>>>> stride 1920
> >>>>>>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000
> >>>>>>> ---<<BOOT>>---
> >>>>>>> KDB: debugger backends: ddb
> >>>>>>> KDB: current backend: ddb
> >>>>>>> Copyright (c) 1992-2020 The FreeBSD Project.
> >>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >>>>>>> The Regents of the University of California. All rights reserved.
> >>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> >>>>>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021
> >>>>>>> admin at lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> >>>>>>> FreeBSD clang version 11.0.0 (git at github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
> >>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
> >>>>>>> VT(efifb): resolution 1920x1080
> >>>>>>> module firmware already present!
> >>>>>>> real memory = 4158377984 (3965 MB)
> >>>>>>> avail memory = 4025098240 (3838 MB)
> >>>>>>> Starting CPU 1 (1)
> >>>>>>> Starting CPU 2 (2)
> >>>>>>> Starting CPU 3 (3)
> >>>>>>> Starting CPU 4 (100)
> >>>>>>> Starting CPU 5 (101)
> >>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
> >>>>>>> random: unblocking device.
> >>>>>>> random: entropy device external interface
> >>>>>>> MAP f3f16000 mode 2 pages 4
> >>>>>>> MAP f3f1b000 mode 2 pages 4
> >>>>>>> MAP f6f40000 mode 2 pages 16
> >>>>>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
> >>>>>>> kbd0 at kbdmux0
> >>>>>>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
> >>>>>>> ofwbus0: <Open Firmware Device Tree>
> >>>>>>> clk_fixed0: <Fixed clock> on ofwbus0
> >>>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
> >>>>>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0
> >>>>>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0
> >>>>>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0
> >>>>>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0
> >>>>>>> regfix0: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix1: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix2: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix3: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix4: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix5: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix6: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix7: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix8: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix9: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix10: <Fixed Regulator> on ofwbus0
> >>>>>>> regfix11: <Fixed Regulator> on ofwbus0
> >>>>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0
> >>>>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> >>>>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0
> >>>>>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0
> >>>>>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0
> >>>>>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
> >>>>>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0
> >>>>>>> gpiobus0: <OFW GPIO bus> on gpio0
> >>>>>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0
> >>>>>>> gpiobus1: <OFW GPIO bus> on gpio1
> >>>>>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0
> >>>>>>> gpiobus2: <OFW GPIO bus> on gpio2
> >>>>>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0
> >>>>>>> gpiobus3: <OFW GPIO bus> on gpio3
> >>>>>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0
> >>>>>>> gpiobus4: <OFW GPIO bus> on gpio4
> >>>>>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
> >>>>>>> iicbus0: <OFW I2C bus> on rk_i2c0
> >>>>>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
> >>>>>>> iicbus1: <OFW I2C bus> on rk_i2c1
> >>>>>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
> >>>>>>> iicbus2: <OFW I2C bus> on rk_i2c2
> >>>>>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
> >>>>>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
> >>>>>>> iicbus3: <OFW I2C bus> on rk_i2c3
> >>>>>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
> >>>>>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
> >>>>>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
> >>>>>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
> >>>>>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0
> >>>>>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffffrk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1
> >>>>>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0
> >>>>>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0
> >>>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
> >>>>>>> cpu0: <Open Firmware CPU> on cpulist0
> >>>>>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0
> >>>>>>> cpu1: <Open Firmware CPU> on cpulist0
> >>>>>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1
> >>>>>>> cpu2: <Open Firmware CPU> on cpulist0
> >>>>>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2
> >>>>>>> cpu3: <Open Firmware CPU> on cpulist0
> >>>>>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3
> >>>>>>> cpu4: <Open Firmware CPU> on cpulist0
> >>>>>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4
> >>>>>>> cpu5: <Open Firmware CPU> on cpulist0
> >>>>>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5
> >>>>>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0
> >>>>>>> pcib0: Gen1 link training timeouted: 0x00080001.
> >>>>>>> pci0: <PCI bus> on pcib0
> >>>>>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0
> >>>>>>> pcib0: failed to reserve resource for pcib1
> >>>>>>> pcib1: failed to allocate initial memory window: 0-0xfffff
> >>>>>>> pci1: <PCI bus> on pcib1
> >>>>>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
> >>>>>>> rockchip_dwmmc0: Hardware version ID is 270a
> >>>>>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
> >>>>>>> rockchip_dwmmc1: Hardware version ID is 270a
> >>>>>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0
> >>>>>>> rk_emmcphy0: got emmcclk clock
> >>>>>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk.
> >>>>>>> sdhci_fdt0: 1 slot(s) allocated
> >>>>>>> mmc0: <MMC/SD bus> on sdhci_fdt0
> >>>>>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0
> >>>>>>> usbus0: EHCI version 1.0
> >>>>>>> usbus0 on ehci0
> >>>>>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0
> >>>>>>> usbus1 on ohci0
> >>>>>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0
> >>>>>>> usbus2: EHCI version 1.0
> >>>>>>> usbus2 on ehci1
> >>>>>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0
> >>>>>>> usbus3 on ohci1
> >>>>>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
> >>>>>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30
> >>>>>>> xhci0: 64 bytes context size, 32-bit DMA
> >>>>>>> usbus4: trying to attach
> >>>>>>> usbus4 on xhci0
> >>>>>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
> >>>>>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31
> >>>>>>> xhci1: 64 bytes context size, 32-bit DMA
> >>>>>>> usbus5: trying to attach
> >>>>>>> usbus5 on xhci1
> >>>>>>> iicbus0: <unknown card> at addr 0x22
> >>>>>>> iic0: <I2C generic I/O> on iicbus0
> >>>>>>> iic1: <I2C generic I/O> on iicbus1
> >>>>>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0
> >>>>>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0
> >>>>>>> uart1: console (1500000,n,8,1)
> >>>>>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
> >>>>>>> spibus0: <OFW SPI bus> on spi0
> >>>>>>> spibus0: <unknown card> at cs 0 mode 0
> >>>>>>> iicbus2: <unknown card> at addr 0x82
> >>>>>>> iic2: <I2C generic I/O> on iicbus2
> >>>>>>> iicbus3: <unknown card> at addr 0x44
> >>>>>>> iic3: <I2C generic I/O> on iicbus3
> >>>>>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
> >>>>>>> pwmbus0: <OFW PWM bus> on pwm0
> >>>>>>> pwmc0: <PWM Control> channel 0 on pwmbus0
> >>>>>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
> >>>>>>> pwmbus1: <OFW PWM bus> on pwm1
> >>>>>>> pwmc1: <PWM Control> channel 0 on pwmbus1
> >>>>>>> gpioc0: <GPIO controller> on gpio0
> >>>>>>> gpioc1: <GPIO controller> on gpio1
> >>>>>>> gpioc2: <GPIO controller> on gpio2
> >>>>>>> gpioc3: <GPIO controller> on gpio3
> >>>>>>> gpioc4: <GPIO controller> on gpio4
> >>>>>>> gpioled0: <GPIO LEDs> on ofwbus0
> >>>>>>> cryptosoft0: <software crypto>
> >>>>>>> Timecounters tick every 1.000 msec
> >>>>>>> usbus0: 480Mbps High Speed USB v2.0
> >>>>>>> usbus1: 12Mbps Full Speed USB v1.0
> >>>>>>> usbus2: 480Mbps High Speed USB v2.0
> >>>>>>> usbus3: 12Mbps Full Speed USB v1.0
> >>>>>>> usbus4: 5.0Gbps Super Speed USB v3.0
> >>>>>>> usbus5: 5.0Gbps Super Speed USB v3.0
> >>>>>>> ugen3.1: <Generic OHCI root HUB> at usbus3
> >>>>>>> uhub0 on usbus3
> >>>>>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> >>>>>>> ugen2.1: <Generic EHCI root HUB> at usbus2
> >>>>>>> uhub1 on usbus2
> >>>>>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> >>>>>>> ugen1.1: <Generic OHCI root HUB> at usbus1
> >>>>>>> uhub2 on usbus1
> >>>>>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> >>>>>>> ugen0.1: <Generic EHCI root HUB> at usbus0
> >>>>>>> uhub3 on usbus0
> >>>>>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> >>>>>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5
> >>>>>>> uhub4 on usbus5
> >>>>>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
> >>>>>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4
> >>>>>>> uhub5 on usbus4
> >>>>>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
> >>>>>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block
> >>>>>>> mmcsd0boot0: 4MB partition 1 at mmcsd0
> >>>>>>> mmcsd0boot1: 4MB partition 2 at mmcsd0
> >>>>>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0
> >>>>>>> Release APs...done
> >>>>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0
> >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>>>>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
> >>>>>>> Instruction Set Attributes 1 = <>
> >>>>>>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
> >>>>>>> Processor Features 1 = <>
> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>>>>>> Memory Model Features 1 = <8bit VMID>
> >>>>>>> Memory Model Features 2 = <32bit CCIDX,48bit VA>
> >>>>>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]...
> >>>>>>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
> >>>>>>> Debug Features 1 = <>
> >>>>>>> Auxiliary Features 0 = <>
> >>>>>>> Auxiliary Features 1 = <>
> >>>>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1
> >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>>>>>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2
> >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>>>>>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3
> >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
> >>>>>>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0
> >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
> >>>>>>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1
> >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
> >>>>>>> WARNING: WITNESS option enabled, expect reduced performance.
> >>>>>>> Unresolved linked clock found: clkin_gmac
> >>>>>>> uhub0: 1 port with 1 removable, self powered
> >>>>>>> uhub2: 1 port with 1 removable, self powered
> >>>>>>> Warning: no time-of-day clock registered, system time will not be set accurately
> >>>>>>> uhub4: 2 ports with 2 removable, self powered
> >>>>>>> uhub5: 2 ports with 2 removable, self powered
> >>>>>>> uhub3: 1 port with 1 removable, self powered
> >>>>>>> uhub1: 1 port with 1 removable, self powered
> >>>>>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339.
> >>>>>>> Setting hostid: 0x5d4b60f9.
> >>>>>>> Starting file system checks:
> >>>>>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
> >>>>>>> /dev/mmcsd0p3: clean, 27264816 free (352 frags, 3408058 blocks, 0.0% fragmentation)
> >>>>>>> lock order reversal:
> >>>>>>> 1st 0xffffa00062dabbe0 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724
> >>>>>>> 2nd 0xffffa00062c9ddc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918
> >>>>>>> lock order devfs -> ufs established at:
> >>>>>>> #0 0xffff000000569234 at witness_checkorder+0x448
> >>>>>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8
> >>>>>>> #2 0xffff00000075ad38 at ffs_lock+0x64
> >>>>>>> #3 0xffff0000005ed57c at _vn_lock+0x54
> >>>>>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8
> >>>>>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4
> >>>>>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c
> >>>>>>> #7 0xffff0000005d3564 at parse_mount+0x49c
> >>>>>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc
> >>>>>>> #9 0xffff00000048dc68 at start_init+0x24
> >>>>>>> #10 0xffff0000004b7474 at fork_exit+0x7c
> >>>>>>> lock order ufs -> devfs attempted at:
> >>>>>>> #0 0xffff000000569a40 at witness_checkorder+0xc54
> >>>>>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50
> >>>>>>> #2 0xffff0000005ed57c at _vn_lock+0x54
> >>>>>>> #3 0xffff0000005d77d8 at vget_finish+0x4c
> >>>>>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0
> >>>>>>> #5 0xffff0000003b12c0 at devfs_root+0x44
> >>>>>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154
> >>>>>>> #7 0xffff0000005d89b0 at vflush+0x5c
> >>>>>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34
> >>>>>>> #9 0xffff0000005cf4c4 at dounmount+0x43c
> >>>>>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8
> >>>>>>> #11 0xffff000000812d0c at do_el0_sync+0x454
> >>>>>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90
> >>>>>>> Mounting local filesystems:.
> >>>>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat
> >>>>>>> Setting hostname: kazu.tfc.
> >>>>>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1
> >>>>>>> ukbd0 on uhub2
> >>>>>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1
> >>>>>>> kbd1 at ukbd0
> >>>>>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
> >>>>>>> Feeding entropy: .
> >>>>>>> lo0: link state changed to UP
> >>>>>>> Starting Network: lo0.
> >>>>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> >>>>>>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
> >>>>>>> inet6 ::1 prefixlen 128
> >>>>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
> >>>>>>> inet 127.0.0.1 netmask 0xff000000
> >>>>>>> groups: lo
> >>>>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> >>>>>>> Starting devd.
> >>>>>>> Autoloading module: mx25l.ko
> >>>>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
> >>>>>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K
> >>>>>>> Autoloading module: pwm_backlight.ko
> >>>>>>> link_elf: symbol backlight_get_info_desc undefined
> >>>>>>> kldload: can't load pwm_backlight.ko: No such file or directory
> >>>>>>> Autoloading module: uhid.ko
> >>>>>>> Autoloading module: wmt.ko
> >>>>>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table
> >>>>>>> route: writing to routing socket: Network is unreachable
> >>>>>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable
> >>>>>>> add host ::1: gateway lo0 fib 0: route already in table
> >>>>>>> add net fe80::: gateway ::1
> >>>>>>> add net ff02::: gateway ::1
> >>>>>>> add net ::ffff:0.0.0.0: gateway ::1
> >>>>>>> add net ::0.0.0.0: gateway ::1
> >>>>>>> Updating /var/run/os-release done.
> >>>>>>> Creating and/or trimming log files.
> >>>>>>> Updating motd:.
> >>>>>>> Clearing /tmp (X related).
> >>>>>>> Starting syslogd.
> >>>>>>> No core dumps found.
> >>>>>>> Mounting late filesystems:.
> >>>>>>> Security policy loaded: MAC/ntpd (mac_ntpd)
> >>>>>>> Starting ntpd.
> >>>>>>> Feb 3 18:00:15 kazu ntpd[1004]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 38 days ago
> >>>>>>> Performing sanity check on sshd configuration.
> >>>>>>> Starting sshd.
> >>>>>>> Starting cron.
> >>>>>>> Starting sendmail.
> >>>>>>> Starting sendmail_msp_queue.
> >>>>>>> Configuring vt: blanktime screensaverFeb 3 18:00:16 kazu ntpd[1004]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8)
> >>>>>>> kldload: can't load logo_saver: No such file or directory
> >>>>>>> /etc/rc: WARNING: Unable to load kernel module logo_saver
> >>>>>>> .
> >>>>>>> Starting background file system checks in 60 seconds.
> >>>>>>>
> >>>>>>> Wed Feb 3 18:00:16 JST 2021
> >>>>>>>
> >>>>>>> FreeBSD/arm64 (kazu.tfc) (ttyu1)
> >>>>>>>
> >>>>>>> login:
> >>>>>>>
> >>>>>>>
> >>>>>>> [1] https://github.com/TrueFC/ports/tree/master/sysutils/u-boot-pinebook-pro
> >>>>>>>> the twitter thread
> >>>>>>>> https://twitter.com/jsm22413542/status/1355896239104159748
> >>>>>>>>
> >>>>>>>> Long story short I keep CPLL at 800000000 but set ACLK_VOP1 at 594000000..
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> /Jsm
> >>>>>>>>
> >>>>>>>> _______________________________________________
> >>>>>>>> freebsd-arm at freebsd.org mailing list
> >>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> >>>>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> >>>>>>>>
> >>>>>>> ---
> >>>>>>> Kazuhiko Kiriyama <kiri at truefc.org>
> >>>>>> _______________________________________________
> >>>>>> freebsd-arm at freebsd.org mailing list
> >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> >>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> >>>>>>
> >>>> _______________________________________________
> >>>> freebsd-arm at freebsd.org mailing list
> >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> >>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> >>>>
> >> _______________________________________________
> >> freebsd-arm at freebsd.org mailing list
> >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> >>
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>
More information about the freebsd-arm
mailing list